Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹29.2 L+₹4.0 L (15.6%)Rejected-AOC | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹29.9 L+₹4.6 L (18.1%)Rejected-AOC | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹31.6 L+₹6.3 L (24.8%)Rejected-AOC | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹32.4 L+₹7.1 L (28.2%)Rejected-AOC AT PO BHEJAPUT DAMANJODI KORAPUT 763008 | KORAPUT | ODISHA | 763008 | L5 | Rejected-AOC REJECTED |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
31 Mar 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM,TnC
GM,TnC,NALCO, DAMANJODI
CONSTRUCTION OF FIVE NUMBERS ROOM, TRS-CONFERENCE ROOM AND TOILET AT WAGON REPAIR SHOP, TRAFFIC, ALUMINA REFINERY, NALCO, DAMANJODI
2023_NALCO_745257_1
TnC/AR/03/eC-2510
Limited
Miscellaneous Works
Item Rate
545 days
NALCO, DAMANJODI
7 documents required · 7 mandatory
₹0
₹40,000
Yes
23 Sept 2023
15 Mar 2023
3 Apr 2023
15 Mar 2023
31 Mar 2023
15 Mar 2023
Amount
1.1.1/P62Removing the excavated materials,debris of any description and any other waste materials,spoil including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places, spreading / levelling complete and disposal inside plant within 2 KM lead.
2.8.1Earth work in all kinds of soil in foundation, trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out the excavated soil and disposal of surplus earth as directed within a lead of 50 M. Disposed soil to be levelled and neatly dressed. Lift up to 1.5 m in all kind of soil.
02.27.00Filling of sand under floors in trenches sides of foundations etc. including supply of sand and watering, ramming, consolidating and dressing etc. all complete as directed by Engineer-in- Charge.
4.1.3Providing and laying plain cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded 20 mm and down stone aggreagates) ,at all depths below and upto ground level in foundations,fillings,non-suspended floors including tamping, curing etc. including the cost of centering and shuttering etc. as specified or directed in any shape,position, thickness and finishing the top surface rough or smooth etc.all complete(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)
04.01.05Providing and laying plain cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded 20 mm and down stone aggreagates) ,at all depths below and upto ground level in foundations,fillings,non-suspended floors including tamping, curing etc. including the cost of centering and shuttering etc. as specified or directed in any shape,position, thickness and finishing the top surface rough or smooth etc.all complete(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)
22.14.1Providing and laying grading concrete for water proofing treatment with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone grit of 6mm and down nominal size) and approved water proofing compound ( Sika/ LW+/Dr. Fixit/ Pidilite ) or equivalent as per the manufacturer's specification, incuding cleaning of surface, including centering & shuttering work for panneling,curing , necessary scaffolding up to all hight, etc. all complete as per direction of Engineer-in-Charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO's STORE).
05.02.02Providing and laying reinforced cement concrete with RCC grage 1:1 1/2:3 (1 cement: 1 1/2 sand: 3 stone aggregate) work in foundation, roofs, slabs, lintels, beams,chajjas, columns,walls in vertical or horizontal fins, bressummers,shelves, suspended floors, landing, balconies, pillars, piers, abutments, posts and struts etc. in super structure up to floor five level (a hight of 20 metres from ground level), including necessary curing, as directed by Engineer-in-Charge but excluding cost of reinforcement, centering and shuttering etc. complete (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE).
05.09.01Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, rafts of columns,plinth beam up to plinth level as directed by Engineer-in Charge.Work in foundation and footing upto ground level in all shape and sizes.Work below ground level and up to plinth level , in all shapes and sizes.
05.09.03Centering and shuttering including strutting, propping etc. and removal of form work for columns, lintels, roof beams, roof slabs, cantilever beam/roof, chajjas, and similar types of work above ground level as directed by Engineer-in Charge, up to all heights and in all shapes and sizes.
05.22.03Bending / Binding and placing in position high yield deformed bars reinforcement conforming to IS:1139 or cold twisted deformed bars reinforcement conforming IS:1786 for R.C.C.work at all height and depths,carting the same from store/issue points to site of work, straightening, cleaning, bending to required shape and lengths as per details including supplying and binding with contractor's own soft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused/ scrap/ unserviceable steel to owner's storage point etc all complete. (REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO's STORE)
06.02.03Providing & laying brick masonry in foundation and plinth in any shape including all complete in Cement mortar (1Cement:6 sand), incuding cost of materials, all labours, curing, scaffolding etc. ( Ash bricks and cement will be issued free of cost at respective location.)
06.03.03Providing & laying Brick masonry in superstructure in any shape including scaffolding, staging, curing, all complete in Cement mortar (1 Cement:6 sand) up to a hight of floor V ( 20 metres from ground level). (Ash bricks and cement will be issued free of cost at respective location ).
06.13.02Providing and laying half brick work with approved quality kiln burnt bricks in superstructure in cement mortar1:4(1cement: 4 course sand), including curing and racking out the joints, up to a hight of floor V ( 20 metres from ground level), etc. complete (ASH BRICKS AND CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE)
11.06.1Cement plaster skirting of 18 mm thick up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.Cement will be issued free of cost from NALCO's store.
13.05.02Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6 course sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for a hight up to 10 metres from ground level.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)
15.2.00Dismantling and demolishing cement concrete work including disposal of debris/ dismantled material lead of 50 mtrs. as per the direction of Engineer-in- Charge.
15.03.00Dismantling of R.C.C. work including stacking of bars and disposal of unserviceable materials within 50 mtrs. lead as directed including cutting reinforcement bars from RCC work etc. complete.
15.7.4Dismantling all type of Masonry, stacking serviceable materials at site and removing rubbish including filling in low lying areas of Plant/Township/mines as the case may be etc. all complete as per direction of Engineer-in-charge (up to a lead of 50 mtrs)
10.25.02 Structural steel works fabrication/ refabrication/ modification etc. including erection & fixing of the same true to its level and alignment as per drawing including taking delivery of steel section/ plates etc from NALCO's store or other location to their fabrication yard/ erection site as required and application of one coat of red oxide zinc-chromate of approved quality for all types of structural steel works Columns, Beams, Bracings, purlins, trusses, Cable trays, Gratings, Grills , staircase, ladder, landings, railings, windows, Doors & Shutters.etc brackets, supports ,steel rain water pipes,clamps including necessary connections, supervision etc at all heights and locations etc all complete as per direction of Engineer-in-charge.(REQUIRED STRUCTURAL STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)
13.61.01Supply and application of two coat of synthetic enamel paint of approved brand and shade on all kinds of structural works including cleaning of old surface etc all complete with all labour tools, tackles, consumables etc all heights as per direction of Engineer-in-charge at all heights.
15.18.00Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead.
13.61.01Supply and application of two coat of synthetic enamel paint of approved brand and shade on all kinds of structural works including cleaning of old surface etc all complete with all labour tools, tackles, consumables etc all heights as per direction of Engineer-in-charge at all heights.
09.141.00Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.
09.142.01)35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. Non decorative finish (matt finish) .
21.1.1.1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) .
21.1.1.2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) :For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) .
21.1.1.3Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion: Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) .
21.1.2.1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
21.1.2.2.Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) .
21.17.00Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved esign/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
21.02.01Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
21.03.02Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness .
10.30.01Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.
21.04.01Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness.
9.84)9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
9.101.2Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.9.101.2 Twin rubber stopper
09.96.01Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm .
09.97.00Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm .
09.97.01Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150 x10 mm .
09.100.01Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm .
12.25.1Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : 12.25.1 12 mm thick .
21.5.0Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of falseceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre andfixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-incharge(level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
21.6.0Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge.
21.7.1Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. 21.7.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) .
12.29.00)12.29 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed tomain runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). sqm 629.55
11.39.00Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. ( Cement shall be issued free of cost.)
11.41.2Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm . ( Cement will be issued free of cost by NALCO at it's store point ).
11.36.01Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. ( Cement shall be issued free of cost.)
12.41.02Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. :- 110 mm diameter .
13.60.00Providing, painting with plastic emulsion paint of approved make / shade as per colour scheme on walls on old / new surface etc complete.The works shall shall include the preparation of surface by sand papering, wire brushing, removal of scales and peeled off surfaces , filling the depressions,nail holes by putty and painting uniformly without any patches and brush markings.The area must be cleaned after completion of painting work. For two or more coat with new colour at all hight.
13.43.01Applying a coat of approved water thinnable cement primer on new/old cement plaster surface after removing the colour wash/white wash & foreign particles rubbing with sand paper as directed etc. complete at all hight.
13.26.00Supplying and Applying putty ( J K White putty or equivalent ) on the old/new walls , celing with necessary scaffoldings to give an even surface & smooth after cleaning the colour wash/ white wash/distemper with wire brush or sand paper with all materials, tools & takles etc. all complete at all hight.
13.46.01Supplying , applying and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm , including necessary scafolding up 10 m. hight ,all material and all labours, etc all complete.
17.5.1Providing & fixing one urinal with flat back half stall type white glazed ceramic of 580x380x350 mm size of approved make withof parryware/ hindware/ seabird/ orient(oral) with fittings, standard size C.P. brass flush pipespreaders with unions & clamps(all in CP brass) with waste fittings as per IS2556 C.I. trap with outlet grating & other couplings in C.P. brass including painting of fitings and cutting & making good the walls & floors wherever required all complete as per direction of Engineeer-in-charge.
17.01.00Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm PVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests .
17.2.1Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid .
18.09.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge for external work: - 25 mm nominal outer dia Pipes .
18.18.00 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :- 25 mm nominal bore .
18.48.00)18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 6.30
17.71.00Providing and fixing of PTMT liquid soap container of 109 mm wide 125 mm high & 112 mm distance from wall as per direction of Engineer-in-Charge.
17.07.04Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :- White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap .
17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250 mm .
1951/ DSRProviding & fixing approved 32mm size C.P. waste for wash basins and urinal basins.
17.28.01Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.1: Semi rigid pipe of 32 mm dia , all complete.
7411/ DSRProviding and fixing PTMT 125 mm grating with waste hole , all complete.
17.31.00Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos sheet ground fixed to wooden cleats with C.P.brass screws and washers.
17.33.00Providing and fixing 600 x 120 x 5 mm glass shelf edges rounded off supported on anodised aluminium angles frame with C.P brass brackets and guard rail complete fixed to wooden cleats with C.P. brass screws and washers.
17.35.1.2Providing and fixing soil, waste and vent pipes : 17.35.1 100 mm dia 17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.
17.38.1.2Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.38.1 100 mm dia 17.38.1.2 Sand cast iron S&S as per IS - 3989 .
17.39.1.1Providing and fixing plain bend of required degree. 17.39.1 100 mm dia 17.39.1.1 Sand cast iron S&S as per IS - 1729.
17.40.1.2Providing and fixing heel rest sanitary bend 17.40.1 100 mm dia 17.40.1.2 Sand cast iron S&S as per IS - 3989 .
17.41.1.2access door, insertion rubber washer 3 mm thick, bolts and nuts complete :17.41.1 100x100x100x100 mm 17.41.1.2 Sand cast iron S&S as per IS - 3989 .
17.43.1.2Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.43.1 100x100x100 mm 17.43.1.2 Sand cast iron S&S as per IS - 3989
18.15.00Providing and fixing 15mm nominal bore brass bib cock / stop cock/pillar cock of approved quality with ISI mark (weight not less than 400 gms) and as per relevant ISI specification or equivalent approved brand.
18.21.02Providing & fixing 15mm dia 450 mm long PVC pipe (uplasticised) with 2 nos brass nuts coupling etc. complete.
18.47.00 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :- GI union 15 mm dia size.
18.47.02 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :- GI union 20 mm dia size.
17.71.00 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
17.73.00 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:- 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms
17.75.00 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.
18.58.1.2Supply and fixing of PTMT fittings with necessary arrangements all complete.PTMT grating of 125 mm nominal dia with 25 mm waste hole .
18.58.1.1Supply and fixing of PTMT fittings with necessary arrangements all complete.PTMT grating 100 mm dia - 100 mm nominal dia .
18.07.00 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes . Internal work - Exposed on wall .
18.07.02 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes . Internal work - Exposed on wall .
18.25.01 Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) : 18.25.1 Up to 300 mm dia .
18.27.03 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :100 mm dia pipe metre .
19.06.03 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :- 250 mm dia. R.C.C. pipe metre .
12.01.02Fixing in position CGI Sheets/translucent fibre reinforced plastic sheet of standard sizes/PPGL sheets/ Aluminium alloy sheets including taking delivery from NALCO's Stores for all works in roofs, walls gables, claddings and louvers etc. including all accessories like self drilling screw, stitch bolts limpet washers, bitumen washers etc. including cutting, mitering, drilling, temporary, scaffolding, staging with safety rules, all labours, tools tackles etc. all complete at all height.(CGI SHEET/TRANSLUCENT REINFORCED FIBRE GLASS SHEET/PPGL sheets/Aluminium alloy sheets SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)
12.04.1 Taking delivery from NALCO"s Store, transportation to site and fixing plain GI sheet/ PPGL sheet of 600 mm width for ridge, cornor pieces, flashings, north light curves bargeboards etc, bent to shape fixed with supply and fixing of approved self drilling screw, bolts, nuts. GI limpet and bitumen washers approved make, necessary laps, finishing, providing hooks, nuts, sitch bolts etc all complete as per specification and direction of Engineer in charge at all heights.(ONLY PLAIN GI SHEETS/ PPGL sheets SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE).
15.28.2 Dismantling of CGI/PGI sheeting work from existing buildings, stacking the same and disposing off the damaged sheets to the dumping area inside plant or shifting of the sheets to scrap yard up to 3 KM inside plant. all complete as per the direction of Engineer-in-Charge at all heights.
2508Providing and fixing Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 120 mm ( Fot fixing of door frames and window frames ).
M/s. OM PROVISIONS
BRAJA KISHORE DAS
ASHOK KUMAR BEHERA
M/S PURANDAR MALLICK
BIJAYA KUMAR DALAI
R AND B CONSTRUCTION
KETHAKI ENGINEERING CONSTRUCTION
MS/ BABA BISWANATH CONSTRUCTION
PRADIP KUMAR PATRO
M/S PALEI CONSTRUCTION
M/S M H ZAMAN
PADMANAV NAYAK
NSPP INDIA PRIVATE LIMITED
M/S. BATAKRISHNA SAHOO
S K ENGINEERING WORKS
stage.html
html • 0.08 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_783608.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .