SPECIAL REPAIRS INCL REPLACEMENT OF ROOF, FLOOR, CEILING, SIDE WALLS INCL RAIN WATER DRAINS OF CERTAIN HANGERS AND FOR REPLACEMENT OF OLD ELECTRICAL WIRING AND CONNECTED FITTINGS/FIXTURES IN CERTAIN BLDGS UNDER 5 BRD

Amount

SCHEDULE A BOQ

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each, from chowkhats, complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed.

FibretteTile of 'Wood fiber Cement Composite '1mm width wood fiber 20/25 mm thick of size 600x600/ 600x1200mm having excellent noise absorption of 1 NRC as per ISO: 354, Density 400 Kg/ m3, meets Fire Ratings as per BS 476 Part 5,6 and 7 class 1 and P, water resistant and thermal insulated. Installed on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and directed.

S&F 100 mm long brass butt hinges complete all as specified and directed.

S&F Brass handles, 150 mm long complete all as specified and directed.

S&F 300 mm long, brass, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy all as specified

S&F brass barrel tower bolts of extruded section of size 150 mm long complete all as specified and directed.

S&F repirs door closer hydraulically regulated, designation No. 3, universal type, aluminium extruded body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L Preparing new wooden surfaces of any description exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not packing) removing of serviceable tiles to store and rubbish off the premises complete all as specified

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified and directed.

M&L glazed coloured ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in colour cement to match and 10 mm thick rendering in cement mortar 1:3 complete all as specified

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light shade) including screed bed 15mm thick in CM 1:4 complete all as specified and directed

M&L Complete removal existing treatment of wall surface and applying two coats of OBD over and including 1mm thick wall care putty and a coat of primer complete all as specified and directed

M&L Complete removal of existing treatment of wall and applying two coats of cement based paint on walls over a coat of alkali resistantint priming paint complete all as specified and as directed.

M&L applying one coat of white wash on old Ceiling surface including preparation of surface complete all as specified and as directed.

M&L applying one coat of white wash on old wall surface including preparation of surface complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track of area n exc 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty /beeding in squares exceeding 0.5 sqm each pane for fixing to aluminium/wooden joinery work complete all as specified.

M&L for granite slab 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement admixture of pigment to match the sade of granite stone incl grinding and polishing such as steps, platform, counter, cills and other similar work including screed bed or bedding layer of mortar 15mm thick in cm 1:4 incl taking down existing one complete all as specified and directed

Rounding for edges of store slab one edge, such as in steps cooking platform and other similar work complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white (excld flushing cistern & Pipe) including connection to trap and flushing pipe complete all as specified & directed.

S&F in repairs PVC (EWC)seat cover white colour with flat bottom including CP hinges complete all as specified and directed.

S&F in repairs 10 lit PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed.

S&F in repairs wash hand basin vitreous china white flat back of size 550 X 400mm with brackets,including CP pillar tap fancy type of 15mm bore complete all as specified and as directed.

S&F in repairs Brass Chromium plated waste coupling of 32 mm dia with screwed shank and fly nuts complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts and washers for 450mm long pipe complete all as specified and directed.

S&F in repairs 110 mm dia PTMT grating doom (min. weight 25 gms) complete all as specified and directed.

S&F in repairs Bib taps of 15mm dia chromium plated cast copper alloy of fancy type screwed down for iron pipe complete all as specified and directed. .

S&F in repairs stop valves of 15mm dia cast copper alloy CP fancy type screwed down high presure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs CP fancy type hand faucet with hose & hook for EWC including all necessary fitting complete all as specified.

S&F in repairs Brass CP tubular towal rail of 20mm dia , D type, 600mm long complete all as specified and directed.

S&F repairs Vitreous China Urinal, full stall type, white excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

M&L Water proofing treatment of existing roofs as per details given below after complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to outside the MOD land complete all as specified and as directed :-

(a) Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface to avoid ‘Peeling off’ problems.

(b) All cracks at corner joints, channels and parapets should be properly treated. For filling cracks upto 3mm crack seal material of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical to be used. Bigger cracks, damaged portions & hollow areas must be repaired with polymer modified cement mortar.

(c) Apply a coat of self priming smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions).

(d) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same primed surface & allow to dry for 4 to 6 hours.

(e) Prepare for apply 2nd coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical using brush/roller on the same surface. The temp to be maintained 25 to 35° C through out the all above application work.

(f) In case of severe dampness an additional coat of damp proof materials to be applied.

Note for item No 74 (a) to (f) :- (i) The work shall be carried out through authorized and qualified applicators of the following manufacturers only. MOU to be submitted before commencement of work. Make : M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical

(ii) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work as specified.

(iii) The unit quoted rate is deemed to include taking down of water pipeline, tanks, wires (etc) found on roof and refix at the original position after complete treatment of roof.

(iv) The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto approx 12 mtr height from natural ground level.

(v) The unit rate quoted for item is deemed to include for Removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protection to outside MD land.

(vi) Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be included in the unit rate quoted.

S & F 25 mm outer dia of pipes3-layer PP-R Polypropylene random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors incl taking down existing damaged pipe etc. all as specified and directed.

S & F 20 mm outer dia of pipes3-layer PP-R Polypropylene random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittingsfixed complete to walls, ceilings or in floors incl taking down existing damaged pipe etc. all as specified and directed.

S&F 20mm dia PP-R Gate valves (brass insert) as per requirement of the site complete to walls, ceilings or infloors incl taking down existing one etc. all as specified and directed.

S&F 25mm dia PP-R Gate valves (brass insert) as per requirement of the site complete to walls, ceilings or infloors incl taking down existing one etc. all as specified and directed.

Dismantling to Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed by Engineer-in-Charge

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed by Engineer-in-Charge

Dismantling of false ceiling boarding, any description, fixed or laid /inserted incl timber /GI/ aluminium frame work with screws in ceiling flat or sloping complete all as directed.

M&L MS framed, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing for false ceiling (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for preperation of new steel surface Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S & F False ceiling using 6mm thick designer ceiling board all as specified and directed by Engr -in- Charge (Lake & Hill) all as per Everest regular T 2430

Taking down carefully copper/Alu point wiring (light, fan. socket or power) complete including fixtures and fitings such as switches, ceiling roses, pendents, regulators, sockets , light fitting etc and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separetely) and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

S&F wiring complete with 1.5 sqmm single core PVC insulated, unsheathed FRLS 1100 volts grade,FRLS cable and incl PVC Casing Capping with accessories in wall/roof/ceiling/hangar steel frames etc incl Mpodular terminal boxes fabricated with 1.6mm MS sheet concealed/fixed surface to walls covered with plastic laminated top cover 2.8mm fixed with cadmium plated iron screws etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for

One light point/fan/bell point controlled by one switch

All as per item No. 65 here in before but for one switch socket outlet 3 pin 5 Amps on independent board

All as per Sl No 64 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently

S&F modular switch 1 way 6 Amps, 1 module.

S&F modular switch 1 way 16 Amps, 1 module.

S&F modular socket outlet multipurpose 2/3 pin 6 amps, 2 module.

S&F modular socket outlet multipurpose 2/3 pin 6/16 amps, 2 module.

S&F white cover plate with frame, 3 Module.

S&F metal flush box 3 module.

Supply & fix modular white cover plate with frame,6 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Schneider (Ulti) or equivalent approved make.

Supply & fix modular white cover plate with frame,8 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Schneider (Ulti) or equivalent approved make.

Supply & fix modular white cover plate with frame,12 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Schneider (Ulti) or equivalent approved make.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC) complete all as specified and directed.

S & F Modular Fan step regulator, 120W-2 Module complete all as specified and directed.

Supply and fixing down rod 15 mm medium grade GI tube fxing for ceiling fan with necessary cutting, screwing and fixing on angle iron all as specified and directed

M&L for BLDC energy efficient wall mounted fan 400 mm sweep single phase 230 volts including fixing arrangement on wall/angle all as directed by Engineer -In-Charge complete. Make/Model : Atomberg or equivalent

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts,1-ph,50Hz double door with magnitic locking system including and making smooth the wall surfaces including taking down old unserviceable one complete all as specified. Make : Legrand /Hager/Havells/L&T

S&F MCB SPN 32 Amp , 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified

Supply and fixing single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity conforming to IS 8828 of 1996 all as specified

S&F Sub main wiring for circuit complete with 2 X 6 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia non metallic conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 6 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified:

S&F Sub main wiring for circuit complete with 2 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia non metallic conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified:

S&F Sub main wiring for circuit complete with 2 X 2.5 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia metallic conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 2.5 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified:

S&F in repair 36 Watt LED Luminaire suitable for 600x600mm modular ceiling grid/surface/roof including frame of suitable size of above LED light with high efficiency PMMA diffuser gives soft glare free light with available lumen output from notless than 110 lumens/watt.The 36 W system shall be operating at 220-240v AC supply having internal driver .IP20,surge protection not less than 2KV ,permisible limit of CRI range,with recommended burning hours,4000K/6500K etc frequency 50 to 60 Hz ,with 70% lumen maintenance upto 50000 Br Hrs with uniform visually comfortable light output at 150 degree beam spread , . PF should be notless than 0.95 , THD < 10% . Indivisual LED's should not be visible for glare free output ,colour temperature 6500k all as directed. Make :- Philips, Wipro, Jaguar or equivalent

S&F LED flood light 120 watt with intigrated electronic driver,mutliple optics, outdooor type with lumen efficency not less than 120 lum/watt,High performance low wattage street light with Housing high pressure die cast aluminium, high power LED light source, IP66 protection,PDC housing with finless design and high impact resistance (IK07) or higher impact resistance polycorbanate/glass cover with integrated street Light optics,replaceable driver with minimum 4kV surge protection,THD<10%, Pf not less than 0.95, operating voltage 140-270Volts,50HZ with permisible CRI rannge of balance energy efficiency and visibility mounting on wall /bracket fixed with necessary clamps made out of flat iron 50x6mm,bolts,nuts and washers r complete all as directed Make : Phillips / Bajaj / CG / Wipro / Jaguar or equivalent

S&F 4 feet, LED light fitting18 watts (T-8) with out put of not less than 110lumens/watts , box type made with epoxy white powder coated CRCA sheet steel (decorative) light fitting having G13 bipin holders compitable for mounting on wall/ceiling/surface,ermisible limit of CRI range,with recommended burning hours ,4000K/6500K etc , 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, including provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with integrated driver of LED tube rod 4' x 18 watts including removal old existing unsv tube light fitting complete all as specified and as directed. Make :- Philips/ jaquar/Wipro/ Havells

S&F of bracket suitable for street light fitting made out of 40mm dia GI tubing light grade 1.5m long bent to shape, fixed with necessary arrangement for fixing the street light fitting on pole with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers including applying two coats of aluminium paint over on coat of red oxide zinc chrome primer complete etc including taking out old unserviceable one all as directed

S&F of PVC Junction box of existing size on ground ,light weight pole mounting hinged type including MCB Sp 06Amps -1 No including necessary clamp for MCB mounting and mounting of Box on pole with MS flat frame arrangement and necessary connector for looping in and looping out cable connection and suitable glands complete including taking out all old unserviceable items compelete all as directed. Make : Sintex / Hensel or equivalent

Supply and fixing of LED security lights 35W with electronic driver with lumen efficency not less than 110 lum/watt,High performance low wattage street light with Housing high pressure die cast aluminium, high power LED light source, IP66 protection,PDC housing with finless design and high impact resistance (IK08) or higher impact resistance Polycarbonate/glass cover with integrated street Light optics,replaceable driver with minimum 4kV surge protection,THD < 10%, PF not less than 0.95, operating voltage 140-270Volts,50HZ with permisible CRI rannge of balance energy efficiency and visibility compitable for mounting on pole and Gi tubing dia 32-50mm dia , including necessary screws,nuts,bolts of suitable size and necesary wiring from light to Junction Box complete all as directed Make : Phillips / Bajaj / CG / Wipro / Jaguar or equivalent

S&F Exhaust fan 250 mm sweep 230 volt square type, heavy duty with louvers of PVC body including necessary nut, bolts / screws including taking down existing one writing MES No with synthetic enamel paint all specified and directed. Make-Havells Cat No Ventil DX-WH/BLK or equivalent in bajaj, Crompton Greaves etc.

S&F 25 mm dia rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusiveof all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S&F 32 mm dia rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusiveof all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

M&L earthing complete with GI earth plate electrode 600mmx600mmx6mm thick buried in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected with GI earth strip 32mmx6mm thick and GI bolts, nuts, etc and protected by GI pipe light grade 40mm bore and 20 mm dia GI tubing light grade with funnel for watering, connecting to test point, all as shown in electrical plate No.3 of SSR Part I incl necessary earth work and excavation in any type of soil, PCC earth chamber with RCC cover slab, salt, charcoal and MS hook, ane provn of test point complete. NOTE : GI wire upto 7.5 Mtrs shall be included in quoted rates and beyond 7.5 mtrs shall be measured and paid separately.

M & L for Point wiring with 1.5 Sq mm single core copper conductor FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through existing PVC rigid conduit and its accessories of suitable size, heavy grade ISI marked concealed on walls /roof and MS pressed steel terminal boxes of 1.0 mm thick of suitable size duly painted with red oxide metal primer including fixing/grouting sunken and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular cover plates for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for

One light point/fan/bell point controlled by one way switch

All as per Sl No 98 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently complete all as specified and directed.

S&F metal flush box 6 module.

S&F metal flush box 8 module.

S&F ceiling rose, surface type Bakelite 65x55mm 3 terminal complete all as specified and directed.

Supply and fixing load line verticale type TPN DB 8 way double door factory made powder coated distribution board way, including suitable capacity bus bar, Neutral bar, standard DIN rail, earth bar and suitable for incommer MCCB upto 100 Amps complete all as specified and directed

Supply and fixing replacement factory made powder coated distribution board TPN 4 way, double door including bus bar, Neutral bar, standard DIN rail, earth bar acomplete all as specified and directed

S&F MCCB 100 Amp , 415 v, 50 Hz AC 4 Pole, 16 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified

S&F Triple pole Nuetral MCB 63 Amp , 415 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 all as specified

S&F sub main wiring for circuit complete with 4 X 10 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size PVC Casing capping and accessories complete fixed surface to wall/roof/ceiling etc and incl 2 X 10 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified.

S&F sub main wiring for circuit complete with 4 X 6 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size PVC Casing capping and accessories complete fixed surface to wall/roof/ceiling etc and incl 2 X 6 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified.

S&F sub main wiring for circuit complete with 4 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size PVC Casing capping and accessories complete fixed surface to wall/roof/ceiling etc and incl 2 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified.

S&F sub main wiring for circuit complete with 2 X 6 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size PVC Casing capping and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 6 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified:

S&F sub main wiring for circuit complete with 2 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100 Volt grade multi stranded copper conductor cable drawn through and incl suitable size PVC Casing capping and accessories complete fixed surface to wall/roof/ceiling etc and incl 1 X 4 sqmm single core PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc and all as specified:

M&L earthing complete with GI earth plate electrode 600mmx600mmx6mm thick buried in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected with GI wire 4 mm dia thick and GI bolts, nuts, etc and protected by GI pipe light grade 40mm bore and 20 mm dia GI tubing light grade with funnel for watering, connecting to test point, all as shown in electrical plate No.3 of SSR Part I incl necessary earth work and excavation in any type of soil, PCC earth chamber with RCC cover slab, salt, charcoal and MS hook, ane provn of test point complete complete all as specified and directed.

KAARTHIC BUILDERS (BID ID -3334606)

CAK Enterprises (BID ID -3334549)

D.R ASSOCIATES (BID ID -3333613)

Neptune Engineers and Builders (BID ID -3334862)

T SANJEEV KUMAR (BID ID -3333935)

NLK Construction (BID ID -3334672)

KUMAR AGENCIES (BID ID -3334598)

p.chinnasamy (BID ID -3335149)