WELCOME MAINTENANCE TO OFFRS MD ACCN AND CONNECTED E/M WORK IN RV AREA AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT 10

Amount

M&L for preparation of plastered or unplastered old decorated surface of walls by brooming down or with steel wire brushing, scraping down, smoke soot's moulds, moss efflorescent salts& trading oil, greasy spots and filling cracks/holes with cement base wall care putty and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in Charge.

M&L for preparation of plastered or unplastered old decorated surface of walls by brooming down or with steel wire brushing, scraping down, smoke soot's moulds, moss efflorescent salts& trading oil, greasy spots and filling cracks/holes with wall care cement base wall care putty and applying two coats of oil bound distemper complete all as specified and directed by engr-in charge.

M&L for prepartion of plastered or unplastered old deorated surfces by brooming down or steel wire brushing scraping down smoke soot mould moss efforescent salt & trading oil and grease spots and filling cracks/holes with cement base wall care putty and applying one coat of oil bound distemper as on ceiling complete all as specified and as directed by Engr in charge.

M&L for preparation of old painted surfaces of wood & wood based surfaces of any description not otherwise described over 10 cm width & girth and aplying one coat of synthetic enamel paint complete all as specified and directed by Engr-in charge.

M&L for preparation of old paited surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in Charge.

Complete removal of existing treatment from internal surfaces of walls (In Patches ), area ecx 1.00 Sqm but not exceeding 3.00 sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using cement base wall care putty to obtain even and smooth wall surfaces of that portion and using sand paper and then applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in Charge.

M&L for applying 3mm thick wall care putty on wall or ceiling old / new plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Taking down cement plaster on brick walls etc including raking out joints, hacking for keys, scrubing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and fair. etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1: 4) on faces of brick work or concrete surfaces, finished even and fair including scafolding for two/three storey building complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster in CM (1:3) on RCC ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces over a coat of primer complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material & Labour for complete removal and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces and applying cement based wall care putty of 1mm thick over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engineer - in- charge.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and applying cement based wall care putty of 1mm thick over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engineer - in- charge.

M&L for preparation of old decorated external surface of walls by electrically operated grinder including necessary scaffolding etc and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed by Engineer - in- charge.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old surface of wood works with two or more coats complete all as specified and as directed by Engr-in Charge

M&L for preparation of plastered or unplastered old decorated surface of walls by brooming down or with steel wire brushing, scraping down, smoke soot's moulds, moss efflorescent salts& trading oil, greasy spots and filling cracks/holes with cement base wall care putty and applying two coats of plastic emulsion paint complete all as specified and as directed by Engr-in Charge.

Taking down 15 mm bore mild steel tubing of medium grade and connections including cleaning for refixing or removal from site complete all as specified and as directed by Engineer-in-Charge

Description all as per above item No 19 but for 20 mm bore GI pipe complete all as specified and as directed.

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge.

Description all as per above item No 21 but for 20 mm bore GI pipe complete all as specified and as directed.

S&F in repairs 15 mm bore bib taps, chromium plated fancy type, long/ short body screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair cast copper alloy CP Soap dish complete all as specified and directed.

S & F in repair CP towel ring of complete all as specified and directed. Make-ACN-1121BN of of Jaquar or equvelent in kohler.

S&F in repairs 15 mm two in one angle valve cast copper alloy chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all specified and as directed by Engr-in-Charge.

S&F in repairs 15mm bore angle cock, chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed all specified and as directed by Engr-in-Charge.

S&F in repairs sink mixer with swivel spout and 450 mm long braided houses chromium plated complete all as specified. Make -SOL-6319B of jaquar or equivalent in kohler/Marc.

S&F in repair basin mixer with popup waste system, Hot and Cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and directed by Engineer-in -Charge. Make:- Model No- DRC-37005 B of make Jaquar or equivalent in make Kohler/Marc.

S&F in repairs three way wall mixer with popup waste system, hot and cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and as directed. Make- Cat No. FUS-29273 UPR of Jaquar or equivalent in make Kohler/Marc.

S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed.

S&F in repair CP paper holder complete all as specified and directed.

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including chromium plated brass screw and plastic cleats, (minimun weight 190 gms ) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm and fixed all as specified and as directed by Engr-in-Charge.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC valveless, syphonic action type, flushing cistern low level, 10 litre capacity , white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair Brass chromium plated shower rose 125 mm size fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket gurard and railing 60cm long tixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F in repair corner glass shelf set of 3 Nos with bracket complete all as specified and directed.

S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium plated waste coupling 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete to walls all specified and as directed by Engr-in-charge.

S&F in repairs elegent mirror PVC cabinet coloured with towel rail of size (422 x 622) mm complete all as specified and as directed.

Supply and fixing in repairs of sink with drainage, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing CI cantilever bracket and connecting union to pipe over all size (915X460)mm with bowl size (410X330X160)mm complete all as specified and as directed by Engr-in-charge.

Supply & fixing in repair vitreous china EWC Super constellation including cistern of size (83x37x66) cm S trap complete all as specified and as directed. Make:- Cat Part No 20040 (S-10/P-9) of Make Hind ware or equvallent in Parry ware.

S&F in repairs of stainless steel plate rack of size 760mm x 900mm x 250mm and 1mm thick with all fittings and fixed in wall complete all as specified and as directed.

Supply & Fix in repair Door seal with rubber body embodied with necessary MS holder for fixing to bottom of the shutter complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size (580 x 440) mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable PVC clamps after every one meter of intervalcomplete all as specified and as directed.

S&F in repairs PVC(SWR) bends any radius, 110 mm bore with access door complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing clip, rubber beading in square area n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repair floor door stopper of size 150 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring incl cleats etc fixed to doorall complete all as specified and as directed.

S&F in repair MS powder coated/rubber coating of 20 mm dia curtain rod including fancyy type bracket and end knobs fittings complete all as specified and as directed.

S&F in repair 500 litres capacity rotational moulded polyethene water storage tank three layered white colour (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repair 1000 litres capacity rotational moulded polyethene water storage tank three layered white colour (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLSH (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit/surface wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switches sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan/exhaust fan point controlled by one Switch. Note :- (i) Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the quoted rate.

Description all as per srl item No 63.00 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and as directed.

Description all as per srl item No. 63.00 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and as directed.

Description all as per srl item No 63.00 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable size 1.5 Sq mm PVC insulated stranded sheathed copper conductor complete all as specified and as directed.

Description all as per srl item No 63.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated FRLSH including earth wire 2.5 Sq mm copper FRLSH conductor cable connected to earth dolly complete all as specified and as directed.

S&F modular switch 1 way 6 Amps one module complete all as specified and as directed.

Supply and fixing of modular socket 6 Amps 2/3 Pin combined 02 module complete all as specified and directed.

S&F modular switch one way 16 Amps, one module complete all as specified and as directed.

S&F socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed.

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge.

S&F of electric bell, multi music type, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge.

S&F of modular bell push 6 Amps one module complete all as specified and as directed by Engr-in-Charge.

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed by Engr-in-Charge.

Material and labour for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm FRLSH (Nominal area) drawn through and including stove enamelled steel conduit medium duty ISI marked not less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit/surface wiring in walls ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on existing terminal boxes with new brass screws for mounting switches sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan/exhaust fan point controlled by one Switch complete all as specified and as directed. Note :- (i) Cost for cutting, chasing and making good to existing surfaces shall be deemed to be included in the quoted rate.

Description all as per Srl item No 76.00 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and as directed.

Description all as per srl item No. 76.00 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and as directed.

Description all as per Srl item No 76.00 here-in-before but for one bell push controlled by one switch complete all as specified and as directed.

Description all as per srl item No. 76.00 here-in-before but for two way light point controlled by two way switch complete all as specified and as directed.

Description all as per Srl item No 76.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed.

Supply and fixing switch piano flush type 5 Amps, single pole one way complete all as specified and as directed.

Supply and fixing switch piano flush type 5 Amps, single pole two way complete all as specified and as directed.

Supply and fixing socket out let 3 pin 5 Amps, flush type complete all as specified and as directed.

S&F switch piano flush type single pole one way 15 Amps complete all as specified and as directed.

Supply and fixing socket outlet 2 in 1, 3 pin 5/15 Amps, flush type complete all as specified and as directed.

Supply and fixing flush type bell push, 5 Amps complete all as specified and as directed.

Supply and fixing stepped type fan regulator 120 watt, 230 volts, 50 Hz, AC supply complete all as specified and as directed.

Supply and fixing modular stepped type fan regulator 100 watt, one module 230 volts, 50 Hz, AC supply complete all as specified and as directed.

Supply and fixing for modular stepped type fan regulator 100 watt, two module 230 volts, 50 Hz, AC supply complete all as specified and as directed.

S&F in replacement LED Bulb B22 base 12 W 230V 50Hz any colour complete all as specified complete

S&F in replacement modular white cover plate with frame 1 module complete all as specified and as directed.

S&F in replacement modular white cover plate with frame 2 module complete all as specified and as directed.

S&F in replacement modular white cover plate with frame 3 module complete all as specified and as directed.

S&F in replacement modular white cover plate with frame 4 module complete all as specified and as directed.

S&F in replacement modular white cover plate with frame 6 module complete all as specified and as directed.

S&F in replacement modular white cover plate with frame 8 module complete all as specified and as directed.

S&F in replacement modular metal flush box suitable for 1/2/3 module complete all as specified and as directed.

S&F in replacement of modular metal flush box suitable for 4 module complete all as specified and as directed.

S&F in replacement of modular metal flush box suitable for 6 & 8 module complete all as specified and as directed. Note for ser item No 63 to 75 and 92 to 99:- Contractor shall quote rate as per existing Makes and model as per site suitable for modular cover plate to fit in the existing.

S&F in replacement of surface mounting LED round surface down lighter 12 Watt with high effeicient LEDs & glare free opal diffuser with driver internally pre wired etc complete all as specified and as directed.

S&F indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed.

S&F indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt , bipin holder, connector block, LED rod 10 watt etc complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed.

S&F bulk head LED fitting 10 watt with PDC aluminium housing and milky diffuser complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed. Make: Halonix Cat Pt No HLBH-02-10-CW or equivalent in Wipro/Philips/Havels/ Syska.

S&F decorative LED wall bracket light fitting made up of Polycarbonate suitable for B-22 base including one No 12 watt LED bulb, complete all as specified and directed.

S&F in replacement of wall mounting type decorative fitting, made up of polycarbonate including 9 W LED lamp B22 base complete with and including connecting up with copper conductor cable of suitable size including taking down the existing unserviceable fitting complete all as specified and as directed.

S&F in replacement of LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2'x2' size complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in replacement of LED lamp E 27 base 4.9 W 3000 K complete all as specified and as directed.

S&F in replacement of LED lamp E 22 base 6 W 3000 K complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 4 way double door, 200 Amps, rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way, double door , 415 Volts 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enclosure for distribution board TPN (when MCBs to be used ) 4 way double door AC, 3 Phase, 415 Volts, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enclosure for distribution board TPN (when MCBs to be used ) 6 way double door AC, 3 Phase, 415 Volts, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing in replacement of vertical type load line distribution board, double door, 12 way, IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed.

Supply and fixing in replacement of vertical type load line distribution board, double door, 8 way, IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed.

Supply and fixing in replacement of for vertical type load line distribution board, double door, 4 way, IP 43 IK09 AC, 3 phase, 415 volts, TPN bus bar 250 Amps rating and earth bar & din rail complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of TPN/ TP and current carrying capacity 40 to 100 amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of TPN/ TP and current carrying capacity 16 to 32 amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10kA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 Amp in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10kA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 amp in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 kA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 kA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 40 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replaccement of metel clad socket outlet 3 pin, two phase one neutral, 20 Amp suitable for metal clad AC box complete all as specified and as directed.

Supply and fixing in repalcement of metel clad plug top 3 pin, two phase one neutal 20 Amp suitable for metal clad AC box complete all as specified and as directed.

Supply and fixing in replacement of MCCB, 3 pole 100 A, 16kA, 415 Volts complete all as specified and as directed.

S&F MCCB, 4 pole 100 Amp, 16kA, 415 Volts complete with connections complete all as specified and as directed.

Material and labour for submain wiring with 2 run of 2.50 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one run of 2.50 sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

All as per item No 128 here-in-before but for size 2 run of 4 sqmm and one run of 4 sqmm complete all as sepcified and as directed.

All as per item No128 here-in-before but for size 2 run of 6 sqmm and one run of 6 sqmm complete all as sepcified and as directed.

All as per item No 128 here-in-before but for size 2 run of 10 sqmm and one run of 10 sqmm complete all as sepcified and as directed.

All as per item No 128 here-in-before but for size 4 run of 6 sqmm and two run of 6 sqmm complete all as sepcified and as directed.

All as per item No 128 here-in-before but for size 4 run of 10 sqmm and two run of 10 sqmm complete all as sepcified and as directed.

Supply and fixing in replacement of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and as directed.

Supply and fixing in replacement of globe Garden light of any type and colour with 4 feet long PVC pipe 40mm dia including PCC block for fixing of GI pipe complete with all accessories internally pre wired and including connecting up two core copper conductor cable complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement Decorative wall light/ wall lamp comet indoor wall lamp grey/white colour sconce for living room & bedroom B22 base complete all as specified and as directed.

Supply and fixing in replacement Gangbox 15 Amp flush type ( 01 switch + 01 socket) complete all as specified and as directed.

Supply and fixing in replacement Gangbox 5 Amp flush type ( 02 switch + 01 socket) complete all as specified and as directed.

Supply and fixing in replacement Gangbox 15 Amp flush type ( 01 switch + 01 socket) complete all as specified and as directed.

Supply and fixing in replacement combined box 16 Amp 6 pin 3 module complete all as specified and as directed.

Supply and fixing in replacement combined box 16 Amp 6 pin flush type complete all as specified and as directed.

Supply and fixing in replacement combined box 6 Amp 3 pin flush type complete all as specified and as directed.

M&L for earthing complete for building with galvanized mild steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I (2009) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.

DEV CONSTRUCTION (BID ID -3305635)

Kunal Construction Co. (BID ID -3302617)

RK TRADERS (BID ID -3305388)

JAIPAL AND BROTHERS (BID ID -3303894)

M/s Navansh Engineers & Consultants (BID ID -3305524)