SPECIAL REPAIR TO SEWAGE LINE IN ABDUL HAMID ENCLAVE AT AMRITSAR CANTT

Amount

Excavation in trenches in soft/loose soil, not exceeding 1.5metres wide, not exceeding 1.5 metres in depth, for foundation, etc. or for shafts, wells,laying sewage line , manholes, pier holes, etc not exceeding 10 sqm on plan and getting out complete all as specified and directed by the Engineer-in-Charge.

Excavation in trenches in soft/loose soil, not exceeding 1.5metres wide, exceeding 1.5 metres but not exceeding 3 metres in depth, for foundation, etc. or for shafts, wells,laying sewage line , manholes, pier holes, etc not exceeding 10 sqm on plan and getting out complete all as specified and directed by the Engineer-in-Charge.

Returning, filling in, of any type excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed by the Engineer-in-Charge.

Removing excavated material/soil to a distance exceeding 250 metres but not exceeding 500 metres and depositing where directed at a level not exceeding 1.5 metres above the starting point complete all as specified and directed by the Engineer -in-charge.

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified & directed by the Engineer-in-Charge.

Demolition and breaking up drain pipes 200mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Salt Glazed Stoneware drain pipes 150mm bore of quality Grade 'A' , laid in trenches and jointed with neat cement slurry & spun yarn ; complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Salt Glazed Stoneware drain pipes 200mm bore of quality Grade 'A' , laid in trenches and jointed with neat cement slurry & spun yarn ; complete all as specified & directed by the Engineer-in-Charge.

Material & labour for cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) as in foundation filling , mass concrete etc & similar works complete all as specified & directed by the Engineer-in-Charge.

Material & labour for cement concrete bed to drain pipes of 150mm bore in cement concrete 1:3:6 type C2 (Using 40 mm graded crushed stone aggregate) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified & directed by the Engineer-in-Charge.

Material & labour for cement concrete bed to drain pipes of 200mm bore in cement concrete 1:3:6 type C2 (Using 40 mm graded crushed stone aggregate) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified & directed by the Engineer-in-Charge.

Material & labour for providing cement concrete 1:2:4 type B1 (Using 20 mm graded crushed stone aggregate) as in surface channels, drain, benching, cills, top band of manholes, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets , kneelers, apex stones,bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles, throating, & necessary form work complete all as specified & directed by the Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metres mean radius, built in cement mortar (1:6) complete all as specified and directed by the Engineer in Charge.

Material & labour for Brick work (Except bricks) using the serviceable bricks obtained from demolition, straight or curved on plan exceeding 6metres mean radius, built in cement mortar (1:6) complete all as specified and directed by the Engineer in Charge.

Material & labour for Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed by the Engineer in Charge.

Material & labour for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:4), with & including using water proofing compound minimum 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and as directed by the Engr-in - Charge.

Material & labour for precast cement concrete 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain fair faces,including chamfers,weatherings,throating etc. and setting in cement mortar 1:4 , including necessary form work etc; complete all as specified and as directed by the Engineer-in - Charge.

Material & labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and as directed by the Engineer-in - Charge.

Material & labour for Rolled mild steel work Fe 410 -W (Grade E- 250) quality A, as in Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified & directed by the Engineer-in-Charge.

Material & labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm bore pipe complete all as specified and as directed by the Engineer-in - Charge.

Material & labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 200mm bore pipe complete all as specified and as directed by the Engineer-in - Charge.

Supply & Fixing for PVC(SWR) pipes of 110mm bore single socketed, in any length with rubber ring joints & required solvent, laid in trnches or in floors complete all as specified & directed by the Engineer-in-Charge.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition), and removal of surplus spoil to out of MOD land complete all as specified & directed by the Engineer-in-Charge

M/s Vijay Construction Co.

B.J.CONSTRUCTION CO

RAJ KAMAL BUILDERS