Construction of Amusement Cum Children Park at Noney under Part-1 of scheme for Special Assistance to State for Capital Investment FY 2022-23

Amount

(SH:- Construction of Cafeteria)

EARTH WORK

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

SH : CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) 1:5:10 (1 cem :5 Kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

FORM WORKS

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

(d ) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

(e) Edges of slab and breaks in floors and walls (i) Under 20cm wide

BRICKS WORKS

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 Kanhaighat C/Sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

STONE WORKS

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

WOOD WORKS

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : (a) Local Best Quality Tolhao wood

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws..(a) Local best quality Teak wood.(35mm thick).

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10 x15cm 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a) 300 x 16 mm

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250 x 10 mm

Providing & fixing Brass handles with necessary screws etc. complete. (a) 125 mm

SH : FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 Kanhaighat coarse sand) including grouting the joints with white cement and matching pigments etc., complete.(a) Double charge vitrified tile polished finish of size (i) Size of Tile 600x600 mm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Kanhaighat coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete (i) 8mm thick

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of thebuilding all complete as per the architectural drawings with 18 mmthick stone slab over 20 mm ( average ) thick base of cementmortar 1 : 4 ( 1 cement: 4 coarse sand ) laid and pointing withcement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer -in - Charge (i) Polished Granite stone slab Jet Black,Cherry Red,Elite Brown,Cat Eye or equivalent.

Stone tile (polished) work for wall lining over 12mm thick bed ofcement mortar 1:3 (1 cement: 3 coarse sand) and cement slurry @3.3 kg/sqm including pointing in white cement complete. (i) 8mm thick (a) Raj Nagar plain white marble/Udaipur green marble/Zebra black marble.

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with (i) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

Providing and fixing glazing in aluminium door , windows , ventilator shutter and partition etc with EPDM rudder / neoprene gasket etc complete as per the architectural drawing and the directions of engineer in charge ( Cost of aluminium snap beading shall be paid in basic item ): With plain glass panes of 4 mm thickness

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:

(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws,toggles, nuts, bolts, clamps etc., structural and weather silicone sealants,flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including :

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts,nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design,within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete.This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item ncludes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-harge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor hall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item escription, as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes,extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves)on the external face shall be measured in sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified aboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies,India. Cost of testing is payable separately.

The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

SH : FINISHING

12mm cement plaster of mix : 1:4 (1 cement : 4 Kanhaighat coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix (i) 1:4 (1 cement : 4 Kanaighat coarse sand).

15 mm cement plaster 1:3 (1 cement: 3 Kanhaighat coarse sand) finished with afloating coat of neat cement on the roughside of single or half brick wall.

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :(i) Water thinnable cement primer

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Wall painting with plastic emulsion paintofapproved brand and manufacture to give an even shade. (i) Two or more coats on new work

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

P/F20 mm thick plank as eave board with (a) Tolhao/Uchan wood

WATER SUPPLY AND SANITARY INSTALLATION

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) 1:3:6 (1 cem :3 Kanhaighat Coarse sand: 6 graded stone aggrt. 40mm nominal size).

(b) 1:2:4 (1 cem :2 Kanhaighat Coarse sand:4 graded stone aggrt.20mm n/size).

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 Kanhaighat C/Sand)

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level (a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

(c) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

15 mm cement plaster 1:3 (1 cement: 3 Kanhaighat coarse sand) finished with afloating coat of neat cement on the roughside of single or half brick wall.

Providing Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580 x 440mm with integral type foot rests

Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:white vitreous china wash basin size 630x450 mm with a pair of 15mm CP brass pillar taps..

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing 600 x 450 mm bevelled edge mirror with frame of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing M.S. holder bat clamps of approved design toC.I. or S.C.I, rain water pipes embedded in and including cementconcrete blocks 10x10x 10cm of 1:2:4 mix (1 cement: 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and cost ofcutting holes and making good the walls etc. :

P/F C.I. Cover with frame (for manhole and chambers) (i) 600 mm x 450 mm (heavy duty) (38 Kg)

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings , including fixing the pipes with clamps at 1.00 m spacing .This includes joining of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.concealed work,including cutting chases and making good the walls (a) 20mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings , including fixing the pipes with clamps at 1.00 m spacing .This includes joining of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.External work (a) 32 mm nominal outer dia pipes.

(b) 75 mm nominal outer dia. Pipes

(c ) 100 mm nominal outer dia. Pipes

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :(a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 (a) 15 mm nominal bore

P/F Brass full way valve with C.I. wheel (screwed end) (ii) 32mm dia

Providing and placing on terrace (at all floor levels) polyethylenewater storage tank, IS : 12701 marked, with cover and suitablelocking arrangement and making necessary holes for inlet, outletand overflow pipes but without fittings and the base support fortank.

(SH:- Construction of Swimming pool, Filtration, Paver Block and Drain along peripheral of the Pool)

CIVIL COMPONENTS

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level : - (a) 1:3:6 (1 cem :3 Kanhaighat Coarse sand: 6 graded stone aggrt. 40mm nominal size).

(b) 1:2:4 (1 cem :2 Kanhaighat Coarse sand: 4 graded stone aggrt. 20mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc.

(c) Suspended floors, roofs, landings, balconies and access platform,with water proof ply 12mm thick.

(d) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design /shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge.

Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

Supplying and applying Dr. Fixit primeseal (after making dilution with water in the ratio 2:1 ( 2 primesial : 1 water ) on new roof at 1 litre per 9.3 sqm after cleaning the surface using wire brush or approprite tools (surface to be washer off with water)and allow drying of 2 -3hours before applying Dr. Fixit New coat over this coat as per direction of the Engineer - in -charge.

Supplying and applying Dr. Fixit New coat on primeseal roof surface in three different coats at 1 litre per 1.95 sqm . per coat laying fibre mesh with adhesive primer ( consuning 20 litre for 80 sheet of 3 x 10 m fibre mesh ) after 1 st coat of new coat 2nd coat of newcoat should be applied immediately after laying of fibre mesh 3rd coat of Dr. Fixit newcoat should be applied after allowing drying of the 2nd coat for 6 to 8 hrs. Each coat should be applied in perpendicular direction to the underlaying layer. the entire process should be carried out under strict supervision and direction of the Engineer - in -charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 Kanhaighat coarse sand) including grouting the joints with white cement and matching pigments etc., complete.(a) Double charge vitrified tile polished finish of size (i) Size of Tile 600x600 mm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Kanhaighat coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete (i) 8mm thick

15mm cement plaster on rough side of single or half brick wall of mix (i) 1:4 (1 cement : 4 Kanaighat coarse sand).

15 mm cement plaster 1:3 (1 cement: 3 Kanhaighat coarse sand) finished with afloating coat of neat cement on the rough side of single or half brick wall.

MECHANICAL EQUIPMENT

Cartridge filter. Housing made of UPVC material, Flow Rate25m3/hr filtration area : 25 ft2 ,Dia. 200 mm & height1000 mm , Cartridge mesh clarity : 5-15 working pressure 2 bar. Supplied complete with pressure gauge, union connections, air release valve.micron clarity. Working pressure 1.5kg/cm2• Filter tanks made of UPVC material to meet the demands of the toughest applicationsand environmental conditions.• Single piece injection-molded base provides added strength for reliable, corrosionfree performance • stainless steel clamp securely fastens head to filter tank • Durable filter head may be rotated to conveniently position pressure gauge and manual air relief • Extra-large cartridge element provides extra-strength and maximum flow • 1½" or 2" FIP, 2" SKT connections

Self Priming Centrifugal Pump, Body made of glass loaded Polypropylene, Shaft made of SS 420, Mechanical seal: graphite and aluminum, Impeller made of glass loaded Noryl, Flow rate: 18m3/hr @ 8 mtrs head with inbuilt strainer Capacity1.5hp, 2850 rpm, I phase. (1W+1 workshop)

SS LED RGB lights :Wall mounted swimming pool light, bearing LEDs in 12V-4.50W offering a static lighting . It is supplied complete with stainless steel reflector, flexible hose and 2.50m of special underwater cable HO7RNF2x1,5m. Designed only for concrete pools. This is made up of highly chemical-proof plastic and includes special fixing units for its installation. It’s practical construction provides an easy and very quick installation. All you have to do is simply screw the fixing unit or part on the pool wall using the supplied screws and upats. Then you insert and adjust the light on the part you mounted on the wall. This innovating light is ideal for already made swimming pools and performs a vivid illumination using a lower amount of power which makes it economical, too. Protection rate IP-68. This light can be fixed to the wall either by a plastic round shaped fixing ring or by a stainless steel rectangular shaped fixing plate.The color changing 18W

Drain grille made of white ABS plastic with extra stability pillars for extra strength. SS screws.Surface suction velocity 0.5m/sec. Max. recommended flowrate 43m3/h

Skimmer Skimmer for concrete and liner/prefabricated pools.Manufactured in white ABS with top square lid and frame. With flap and flow regulation plug. Supplied with extra strong plastic basket with handle. Skimmer has an option of 3 connection sizes: 1½" internal threaded, 2" threaded and 50mm diameter for gluing.Overflow connection of 40mm diameter. Max.recommended flow is 5m3/h. For optimum results itis recommened to use 1 skimmer per 25m2 of poolsurface area. The skimmer suction can also be used for vacuum cleaning the pool floor.

Maintenance Kit SELF FLOATING HOSE TELESCOPIC HANDLES LENGTH 4.80 METAL POOL CLEANERS STRAIGHT WALL BRUSH 25CM – CLIP HEAVY DUTY DEEP LEAF RAKE - CLIP CURVED WALL BRUSH MADE OF PLASTIC CHLORINE AND PH TEST KIT

PVC Piping with complete fittings of 10 bar for Swimming Pools & Plant Room

Electrical:Electrical wires with conduits. Electrical Panel for recirculation pumps.

Supervision, Erection & Commissioning

(SH :- Construction of Pathways)

EARTH WORK

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design /shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge.

(SH:- Construction of Office and Ticket Counter)

SH : EARTH WORK

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

SH : CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) 1:5:10 (1 cem :5 Kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string courses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

FORM WORKS

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

BRICKS WORKS

Brick work with Ist class common burnt clay F.P.S. (non modular)bricks in foundation and plinth in: (i) (1 Cem: 4 Kanhaighat C/Sand)

Brick work with Ist class common burnt clay F.P.S.(non modular)bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :(i) cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in : (i) cement mortar 1:4 (1 cement : 4 Kanhaighat coarse sand)

Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 Kanhaighat coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : (i) Cement mortar 1:6(1 cement: 6 Kanhaighat coarse sand)

WOOD WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws..(a) Local best quality Tolhao wood.(35mm thick).

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : (a) Local Best Quality Tolhao wood

Providing & fixing local best quality plain lining tongued & grooved on & i/c wooden plug complete with necessary screws & priming coat on unexposed surface.a) 19mm thick (ii) Local best quality Leihao

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarsesand : 6 stone aggrt. 20mm nominal guage).

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F C.P. Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Al. Tower bolts with screws & nuts complete. (a) 250x10 mm

P/F Al. Handles with screws & nuts complete. (a)125mm

SH : FLOORING

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neatcement including cement slurry, but excluding the cost of nosingof steps etc. complete.(i) 40mm thick with 20mm nominal size stone aggregate.

Cement plaster skirting (upto 30 cm height) with cement mortar1:3 (1 cement : 3coarse sand) finished with a floating coat of neatcement.(i) 18 mm thick

SH : STEEL WORK

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots,including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 graded stone aggregate 20mm nominal size)

SH : ROOFING AND CEILING

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with (i) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

SH : FINISHING

12mm cement plaster of mix : 1:4 (1 cement : 4 Kanhaighat coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix (i) 1:4 (1 cement : 4 Kanaighat coarse sand).

15 mm cement plaster 1:3 (1 cement: 3 Kanhaighat coarse sand) finished with afloating coat of neat cement on the roughside of single or half brick wall.

Coal tarring two coats on new work using 10 sqm. Not less than 1.6 litres of coal tar of approved quality for 1st coat 1.2 litres for second coat.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :(i) Water thinnable cement primer

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paintofapproved brand and manufacture to give an even shade. (i) Two or more coats on new work

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

P/F20 mm thick plank as eave board with (a) Tolhao/Uchan wood

(SH:- Construction of Changing Room)

SH : EARTH WORK

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including,watering,ramming consolidating and dressing complete with a lead of 15 Km

SH : CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) 1:5:10 (1 cem :5 Kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :(a)1:1.5:3 (1 cement :1.5 Kanaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

FORM WORKS

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, Pillars, Piers, Abutments, Posts and Struts.

(c) Lintels, beams, plinth beams, girders, bressumers and cantilevers,with water proof ply 12mm thick.

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth in cement mortar 1: 4 (1 Cem:4 kanhaighat C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructure (a)above plinth.

WOOD WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : (a) Local best quality Tolhao wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked MS pressed butt hinges bright finished of required sizes with necessary screws..(a) Local best quality Tolhao wood.(35mm thick).

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : (a) Local Best Quality Tolhao wood

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 coarse sand : 6 stone aggrt. 20mm nominal guage).

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a) 300 x 16 mm

Providing and fixing bright finished brass tower bolts (barrel type)with necessary screws etc. complete : (a) 250 x 10 mm

Providing & fixing Brass handles with necessary screws etc. complete. (a) 125 mm

SH : FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 Kanhaighat coarse sand) including grouting the joints with white cement and matching pigments etc., complete.(a) Double charge vitrified tile polished finish of size (i) Size of Tile 600x600 mm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 Kanhaighat coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete (i) 8mm thick

SH : STEEL WORK

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators side /top /centre hung with beading and all members such as D,F4B,K11B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted,including providing and fixing of hinges, pivots,including priming coat of approved steel primer,but excluding the cost of other ittings,complete all as per approved design. (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 Kanhaighat coarse sand : 6 graded stone aggregate 20mm nominal size)

SH : ROOFING AND CEILING

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trussesand including cutting to size and shape wherever required with (i) Precoated galvanised iron profile sheets 0.50 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : (i) Ridges plain (500 - 600mm). (a) Precoated galvanised iron profile sheets 0.50 mm thick.

Providing and fixing 4mm thick Rhino Brand A.C.Duro Board (Plain sheet) of 610x610 mm ceiling Roofing and Ceiling Item) with wooden beading 62x12mm Leihao wood spaced 61 cm centre to centre maximum on both sides etc complete ( frame work to be paid separately).

SH : FINISHING

12mm cement plaster of mix : 1:4 (1 cement : 4 Kanhaighat coarse sand).

15mm cement plaster on rough side of single or half brick wall of mix (i) 1:4 (1 cement : 4 Kanaighat coarse sand).

15 mm cement plaster 1:3 (1 cement: 3 Kanhaighat coarse sand) finished with afloating coat of neat cement on the roughside of single or half brick wall.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :(i) Water thinnable cement primer

Finishing walls with textured exterior paint of required shade : (i) New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with plastic emulsion paintofapproved brand and manufacture to give an even shade. (i) Two or more coats on new work

Applying priming coat :- (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture

(SH:- Construction & Installation of Sun and Moon)

SH : EARTH WORK

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

(ba) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

SH : CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) 1:5:10 (1 cem :5 Kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

FORM WORKS

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

SH : STEEL WORK

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

(SH:- C/o Design Manufacturing Installation and Commisioning of Amusement park Rides)

Providing fixing of Sun and Moon Ride with following specification:Drive Power 3.7 K.W Lighting Power 2.0 K.W Ride Capacity 24 Children Ride Height 5.7 Mt. Capacity per /Hr 480 Children (Variable) Age Group Below 10 Years Drive Friction Tyre Area required 3M x 6M Nos. of FRP Gondola 6 Gondolas Ride Time & Loading/unloading 180 Seconds Warranty for 1 year from the date of Installation.

(SH:-Construction & Installation of Swing Chair)

SH : EARTH WORK

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

SH : CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) 1:5:10 (1 cem :5 Kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

FORM WORKS

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

SH : STEEL WORK

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

(SH:- C/o Design Manufacturing Installation and Commisioning of Amusement park Rides)

Providing fixing of Swing Chair with following specification: Area required 15 M DIA. Overall Height 5 M Nos. of Chairs 24 Seating Capacity 24 Capacity per /Hr 360 Persons Per Hour Motive Power 5.5 K. W. Light Load 2.5 K.W Warranty for 1 year from the date of Installation.

(SH:- Construction & Installation of Truper)

SH : EARTH WORK

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.(i) All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

SH : CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work upto plinth level (a) 1:5:10 (1 cem :5 Kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

SH : R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 Kanhaighat Coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete up to plinth level/Above Plinth level.(a) Thermo-Mechanically Treated bars.

FORM WORKS

Centering and shuttering including strutting, propping etc. and removal of form for:(a) Foundation footings, bases of columns etc. and mass concrete.

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

SH : STEEL WORK

Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete. (a) Electric resistance or induction butt welded tubes

(SH:- C/o Design Manufacturing Installation and Commisioning of Amusement park Rides)

Providing fixing of Truper with following specification: Dia of Outer fence 15M Total Height 6 M Gradient 30’ Rotating Speed 10 R.P.M No. of Seats 12 (each for 2 Passengers) Accommodation 24 Passengers Capacity per /Hr Approx. 480 Passengers per hour Power for Drive 440 V 15 K.W Power for Lighting 220 V 3 KVA Warranty for 1 year from the date of Installation.

(SH:- Construction of Foot ball Turf)

SH : EARTH WORK

Earth work in excavation by mechanical means (Hydraulicexcavator)/ manual means over areas (exceeding 30cm in depth.1.5m in width as well as 10 sqm on plan) including getting out anddisposal of excavated earth, lead upto 1.00 KM and lift upto 1.5m, asdirected by the Engineer-in- Charge.(i) All kinds of soil.

Providing and fixing of high tech football court of Ground size 25X40 sqft with the following specifications.(A)Football turf specifications Pile Height 50 mm Gauge 5/8 Stitch Rate 15/10 cm Dtex 14000 Density 9450 Backing Triple layer + Green Sbr Yarn Type 100% fresh PE (Stem Shape) with UV resistance Colour 2 Tones Roll Width 4 Mts. (2mts. X 2mts. Dual Shade) Brand Bellinturf, Vietnam Certification Fifa Quality Pro. (B) Football turf layingWhite lines: football turf laying, tufted line marking and infill filling including all the materials and labour.(C)Football court civil works Synthetic turf platform: Boundary wall using RCC belt, playing area filling by using 40mm, 20mm and 6mm gravels. Drainage system:

Fixing of Holed PVC pipes for rainwater drainage in the required level. Industrial work: All being ISI certified; Fixing of 4” X 4” square poles at a height of 7metres from the ground level and required number of fabricated poles as per the guidelines of engineer in charge. RCC foundation work for Industrial leg bottom at a depth of one meter, H frames in the top using 1.5” X 1.5” square pipes, two cross bars using 3” X 1.5” rectangle pipes.Fixing of 2 doors with 3.5 metres height and 1 metre width using 3” x 1.5” rectangle pipes. Industrial legs will be covered by using 10mm cushion at a height of 1.8 metres. Cushion will be covered by premium rexin clothes. Painting: Painting of whole industrial frames using MRF epoxy paint after applying zinc chromate primer. Net covering: Fixing of UV treated ‘garware’ brand, black colourbraided net having 2.5 mm thickness and

50 mm mesh in the sides. UV treated ‘garware’ brand black colour twisted net with 1.5 mm thickness and 40 mm mesh on the roof. Wiring: Includes electrical panel board, control switch, lightening DB, 6mm copper wire, all necessary cabling and electrical work. Lighting: Fixing of LED lamp 200 watts having two years warranty in the required level keeping the optimum level of brightness. Goal posts: Making of One set of goal post using 4-inch round pipes, included UV treated ‘garware’ brand white braided goalpost nets having 5 mm thickness and 100 mm mesh.

(SH:- Construction of Play ground and installation of equipments)

SH : EARTH WORK

Earth work in excavation by mechanical means (Hydraulicexcavator)/ manual means over areas (exceeding 30cm in depth.1.5m in width as well as 10 sqm on plan) including getting out anddisposal of excavated earth, lead upto 1.00 KM and lift upto 1.5m, asdirected by the Engineer-in- Charge.(i) All kinds of soil.

Providing and fixing of Play ground given below:- a) Single unit multi Activity Play Systems, b) Horizontal Toddler swing, c) 6 seater FRP Mary Go Round, d) Fire Engine, e) Swing, f) mother child swing 7' height and 6' width, g) Delux 2 seater Sea Saw, h) Roto tunnel Slide,i) Roto double slide, j) Roto straight Slide, k) Jumble climber,l) UFO climber, m) Stepped ladder, n) 2 seater arch swing, o) Square deck, p) Tipper bridge, q) cross railing, r)window railing,s) X and O game, t) Lift canopy, u) Arch canopy, v) Tile canopy

Sophila Muinao

Thounaojam Robert