Annual sanitary repair to Girls hostel Faculty transit house and staff quarters Teaching Non teaching at Lower residential area of New Campus

Amount

P&L G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches (Make Parkash Surya/Jindal) 15 mm nominal bore

------------do------------- 20 mm nominal bore

------------do------------- 25 mm nominal bore

Making connection of G.I. distribution branch with G.I mains of 25mm to 40mm nom. bore by providing & fixing of Tee by cutting & threading the pipe complete.

P&F Ball Valve (Brass) of approved make including handle. 15 mm nominal bore

------------do------------- 20 mm nominal bore

------------do------------- 25 mm nominal bore

P&F 15mm brass bib cock of approved quality weighing 400 gms.

P&F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware /Cera)

P&F solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ /Cera)White colour

P&F white vitreous china water closet squatting pan.( Indian type) Orissa Pattern W.C. pan of size 580 x 440 mm (Hindware/Parryware/Cera)

P&F low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS: 7231 with fitting & fixtures complete (Parry ware / Hind ware /Cera) 10 Liter Capacity – White.

P&F white vitreous china wash basin including making all connection but excluding the cost of fitting Flat Back W/basin(of size 550 x 400mm)(Parry ware /Hind ware/ Cera)

P&F mirror, thickness of req. shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing Rectangular Shape 453x357 mm.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. (Cera/ Parko/Chilly Make)

P&F of PTMT Pillar cock ‘Prayag Make’ 15 mm nominal bore, 107 mm long weighing not less than 110 gms.

P&F CP brass bibcock of ‘Parko/Cera/Jainco Make’ 15mm nominal bore

P&F PTMT bibcock of Prayag Make 15mm nominal bore, 86 mm long weighing not less than 88 gms.

P&F CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Cera/Jainco Make’ 15mm nominal bore

P&F PTMT angle valve/stop cock for basin mixture Geyser points/washbasins of ‘Prayag Make’15mm nom. Bore, 86 mm long weighing not less than 88 gms.

P&F of C. P. Phase for Pillar cock/Bib Cock 'ISI marked’15 mm nominal bore

P&F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

P&F PTMT Grating (Prayag Make) 100mm dia

P&F phase/jumper washer

P&F C.P Brass waste coupling of 32/40 mm nom size for washbasin/steel sink coupling of approved quality.

P&F PTMT waste coupling of 32/40mm nom size for wash basins/sink coupling 38 mm of 83 mm length and 77 mm breadth.

P&F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

P&F CP jet with PVC pipe to be fixed with WC of approved quality.

P&F of P.V.C. siphon set to be fixed in cistern of approved quality

P&F of PVC cistern bend pipe of standard size of approved quality.

Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality, colour and make, weighing not less than 300 gms (Prayag Make.

P/F of low level PVC cistern Handle of approved quality.

Providing and laying PVC pipe superior quality of following dias (Uniplas, Supreme, Finolex make) 4 kg/cm2 pressure in ground/on walls in case of Rain Water Pipe including all PVC fittings jointing with adhesive of approved make ,making good the same etc. complete. Nothing extra shall be paid. 80 mm dia

--------------do--------------- 110 mm dia

--------------do--------------- 150 mm dia

P&F PVC bend of Supreme/Prince/Uniplas Make 80 mm dia

--------------do--------------- 110 mm dia

--------------do--------------- 150 mm dia

Providing and fixing PTMT towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make. (Prayag Make).

Providing and fixing PTMT soap dish of approved quality (Prayag Make).

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings of Sintex/Star make.

Providing and fixing PVC Floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet

------------do------------- 100 mm inlet and 75 mm outlet

P&F Salem Stainless Steel A ISI 304 kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fitting & brackets & cutting & making good the walls wherever required 610x510mm & Bowl depth 200mm.

P&F of C.P shower rose with 15/20 mm inlet including rod with necessary plugs and screws.100 mm dia

P&F of PTMT shower rose with 15/20 mm inlet including rod with necessary plugs and screws.100 mm dia

Dismantling old floor traps & refitting the same with C.Conc.1:2:4 including jointing the waste water line including labour & material complete.

P&F of P.V.C. water tank covers on existing water tanks of standard size.

P&F of C.P. cup

P&F of C.P. nipple 50mm long & 15mm nom bore

Making platform for Indian W.C. seat complete with cement concrete 1:2:4 (1 cement : 2 sand : 4 garded stone aggregate 20 mm nominal size) including cost of material & labour.

P&F of C.P. long bend for Low Level cistern

Cleaning of Manholes including clearing of drain pipes from manhole to manhole for making the lines fully functional and disposal of mulba outside the University Campus.

Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area (walls, flooring & ceiling) of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge (Only slab area of the sump tank shall be measured for payment).

P& F of CP grating 100 mm nom dia

P&F of CP Heads of Bib cock/ Pillar Cock / Angle valves to existing fixtures

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931a) 15 mm nominal bore

Providing anf fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball (Prayag make). 15 mm nominal bore

--------do-------- --------do----------- 20mm nominal bore

Providing and fixing of GI Accessories for repair work (ISI Make). Nipple 15x100 mm

Nipple 15x150 mm

Elbow 25 mm nominal bore

Elbow 20 mm nominal bore

Elbow 15 mm nominal bore

Socket 20 mm nominal bore

Socket 15 mm nominal bore

Union 15 mm nominal bore

Union 20 mm nominal bore

Union 25 mm nominal bore

P&Fof GI Tank Nipple 25 mm nominal bore

-----------------do----------------- 20 mm nominal bore

Labour for fitting of geysers to suitable location including cost of rawl plugs (geysers to be provided by the department/occupant).

Supply of labour for different works 2nd class plumber

Mazdoor

PAROSHTAM LAL

M/S KAMA DEV SAMAL