Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹20 LAccepted-Finance | ₹20 L | 1 | Accepted-Finance Only one bid found and it is within the AA amount. Hence, accepted under Rule 23 Sub Rule 20 of The Assam Procurement Rule 2020. |
| Sl No | Description | Qty | Unit | WAISONG TERANG L1 |
|---|---|---|---|---|
| 1.00Raw Water Pumping Main | ||||
| 2.00Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes-PE 100) confirming to IS 4984/2016 (with up to date amendment) with necessary jointing material like mechanical connector of jointing pipes by heating the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine.(50 mm & above fusion jointed & below 50mm mechanical jointed). The HDPE fitting should be ISI marked conforming to relevant BIS code. | ||||
| 3.00 | (g) 63 mm dia HDPE PN 6 | 1,995 | metre | 278.76 ₹5,56,126.2 Lowest |
| 4.00Distribution Network | ||||
| 5.00Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes-PE 100) confirming to IS 4984/2016 (with up to date amendment) with necessary jointing material like mechanical connector of jointing pipes by heating the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine.(50 mm & above fusion jointed & below 50mm mechanical jointed). The HDPE fitting should be ISI marked conforming to relevant BIS code. | ||||
| 6.00 | (d) 110 mm dia HDPE PN 6 | 150 | metre | 618 ₹92,700 Lowest |
| 7.00 | (e) 90 mm dia HDPE PN 6 | 160 | metre | 413 ₹66,080 Lowest |
| 8.00 | (f) 75 mm dia HDPE PN 6 | 450 | metre | 333 ₹1,49,850 Lowest |
| 9.00 | (g) 63 mm dia HDPE PN 6 | 500 | metre | 278 ₹1,39,000 Lowest |
| 10.00Filter Bed 2 sqm | ||||
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
5 Jun 2026, 11:00 amClosed
Executive Engineer (PHE), Diphu Rural W/S Division
O/o the Executive Engineer(PHE), Diphu Rural W/S Division, Diphu
Construction of water reservoir with piped water supply facility connecting all household at Joysing Rongpi village(Birhum)
2026_KAAC_52345_1
NIT NO 2 OF 2026-27
Open Tender
Civil Works - Water Works
Works
120 days
Joysing Rongpi Village
Class II and above category having valid trading license/NOC from KAAC
3 documents required · 3 mandatory
₹400
₹40,000
Yes
O/o the Executive Engineer, Diphu Rural W/S Div
8 Jun 2026
14 May 2026
6 Jun 2026
15 May 2026
5 Jun 2026
15 May 2026
15 May 2026 - 5 Jun 2026
26 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Raw Water Pumping Main | - | - | - | - |
| 2 | Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes-PE 100) confirming to IS 4984/2016 (with up to date amendment) with necessary jointing material like mechanical connector of jointing pipes by heating the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine.(50 mm & above fusion jointed & below 50mm mechanical jointed). The HDPE fitting should be ISI marked conforming to relevant BIS code. | - | - | - | - |
| 3 | (g) 63 mm dia HDPE PN 6 | - | metre | 278.76 | - |
| 4 | Distribution Network | - | - | - | - |
| 5 | Providing, Laying, Jointing & field testing of HDPE pipes (High Density Polyethylene Pipes-PE 100) confirming to IS 4984/2016 (with up to date amendment) with necessary jointing material like mechanical connector of jointing pipes by heating the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine.(50 mm & above fusion jointed & below 50mm mechanical jointed). The HDPE fitting should be ISI marked conforming to relevant BIS code. | - | - | - | - |
| 6 | (d) 110 mm dia HDPE PN 6 | - | metre | 618.12 | - |
| 7 | (e) 90 mm dia HDPE PN 6 | - | metre | 413.09 | - |
| 8 | (f) 75 mm dia HDPE PN 6 | - | metre | 333.3 | - |
| 9 | (g) 63 mm dia HDPE PN 6 | - | metre | 278.76 | - |
| 10 | Filter Bed 2 sqm | - | - | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.23 MB
joysingbiddocII.pdf
Tender Documents • 1.75 MB
detailnoticeII.pdf
Additional Documents • 1.22 MB
BOQ_82766.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .