REPAIRS TO JOINERY FLOORING ROOFING PLASTERING AND SANITARY FITTINGS ETC FOR MD ACCN OF SOC HRBK AND FAFA UNDER AGE BR CENTRAL OF GE SOUTH BANGALORE

Amount

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm all as specified and directed.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints, etc complete all as specified and as directed.

S & F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed.

S & F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Second class hard wood Glazed and skelton shutters, 35 mm thick, open rebated and prepared to receive glass, gauaze, etc., with sash bars, edges of framing moulded, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) complete all as specified and as directed.

S&F Second class hard wood Glazed and skelton shutters, 30 mm thick, open rebated and prepared to receive glass, gauaze, etc., with sash bars, edges of framing moulded, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain printed coloured PVC sheet reinforced with MS square tube all as specfied and shown on prodect drawing in SSR Part -II 2010, section 8.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheets and for top rails lock rail and bottom rail on either side and as gap insert for top rail and bottom rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supply and fix in the frame at site as specified and shown on product drawing in SSR Part II - 2010, section 8

S&F 100 mm long but hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 75 mm long but hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy and fixed complete all as specified and as directed.

S&F 75 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed .

S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed .

S & F in repair aluminium (Die cast) door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with stain less steel staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with stain less steel staples complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Hacking out old broken glass exc.1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S & F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed

S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium sectionweighing 0.55 kg/m includingnecessary joining cleats, glazingclips, rubber packing, anodisedaluminium snap beading, screws etc. complete all as specified

S & F in reapir MS handle(Left/Right) 100 mm suitable for steel windows/Ventilator etc complete all as specified and as directed.

S & F in reapir MS hinges 100 mm suitable for steel windows/ventilators and to make easily openable etc complete.

S & F in repair 18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and as directed.

M &L for securing glass of any description in existing wooden frames glazed with putty/beads incl removing loose or decayed putty/beads,painting or oiling on rebates,groves reputting existing work( new length of the frame shall be measured).etc complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side the MD land and complete all as specified and as directed. (Note: the dismantled tiles are propoerty of contractor under schedule of credit)

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), and removing debris out side MD land complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with subclass‘B’ bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 etc complete all as specified and as directed.

M&L for Pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed..

Taking down cement plaster of any description including raking out joints,hacking for key,scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling or similar surfaces and applying three coats of white wash etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceilings and applying two coat of distemper oil emulsion, including priming plastered and other surfaces with chalk whiting on plastered surface complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of distemper oil emulsion, including priming plastered and other surfaces with chalk whiting on plastered surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls incl removing nails, making good holes & cracks etc by filling wall care putty and applying two coats of cement base paint over a coat of white wash complete all as specified and as directed.

S & F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm screed bed in CM 1:6 etc complete all as specified and as directed.

S & F Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a scredd of 15mm th CM 1;6 etc complete all as specified and as directed..

S&F Non-skid Ceramic tiles 7 to8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm th CM 1:6 etc complete all as specified and as directed..

S & F Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement tomatch etc complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on fair face of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M & L for 75mm thick cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate in plinth protection,roof kerb or mud stops, rounded or chamfered on edges, etc complete all as specified and as directed.

M & L for 75mm th providing cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate in sub base complete all as specified and as directed.

M & L 22mm thick coloured glossy finished factory made designer tiles/pavers set and jointed and pointed in neat cement slurry as in path/floor etc over a screed bed of 20mm th in CM 1;6 etc complete all as specified and as directed.

S & F 15 mm bore dia medium grade galvanised water tubing, with all fitting, fixed complete to walls and ceilings or laid in floors, concealed type including taking down old unserviceable GI tubing complete all as specified and as directed.

S & F 20 mm bore dia medium grade galvanised steel tubings, with all fitting, fixed complete to walls and ceilings or laid in floors, concealed type including taking down old unserviceable GI tubing complete all as specified and as directed.

Supply and laying 20mm outer dia CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings, in walls, ceilings , including jointing with yellow solvent cement and taking down old unserviceable GI Tubing complete all as specified and as directed,.

Dismantling of PVC/CI /AC drain pipes of size n.exc 110 mm dia, jointed in cement mortar complete all as spcified and as directed.

M & L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm bore single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm size bore single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F PVC (SWR) bends any radius 75mm dia etc complete all as specifed and as directed.

S & F PVC (SWR) bends any radius 75mm dia with access door etc complete all as specifed and as directed.

S & F PVC (SWR) bends any radius 110mm dia etc complete all a specified and as directed.

S & F PVC (SWR) bends any radius 110mm dia with access door etc complete all as specified and as directed.

S & F PVC (SWR) junctions Single T any radius 110 mm dia equal or unequal with access door compltete all as specified and as dircted.

S&F PVC (SWR) 75 mm vent cowl etc completete all as specified and as directed.

S & F in repair 500 litrs capacity water tanks Rotational moulded polyethylenewater storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed.

S & F in repair 1000 litrs capacity water tanks Rotational moulded polyethylenewater storagetanks (cylindrical verticalwith closed top) hoistedand fixed in position all as specified and as directed.

S&F in repair 20 mm dia ball brass valves,high pressure,with polythene float and fly nut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15 mm dia bib taps, cast copper alloy fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixede etc complete all as specified and as directed.

S & F in repairs 15mm bore Concussive push button taps of cast copper alloy,screwed for iron pipe and fixed etc complete all as specified and as directed.

S&F in repairs stop valves 15 mm dia,cast copper alloy fancy type , Chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc. complete all as specified and as directed.

S&F 15mm dia health faucet, push type with wall hook and 1 metre SS branded rubber hose pipe including taking down old unserviceable one complete all as specified and as directed,

S&F in repairs stop valves 20 mm dia,cast copper alloy fancy type , Chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc. complete all as specified and as directed.

S&F in repair 15 mm dia ball brass valves,high pressure,with polythene float and fly nut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S F in repair 32mm bore Waste coupling of PTMT(half or full threaded) .(Minimum weight 45gms along with waste or flush pipe etc complete all as specified and as direced.

S&F in repairs towel ring brass chromium plated including chromium plated screws and wooden /plastic cleats Complete all as specified and as directed.

S&F towel rail 600mm long brass cp fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F,PVC connection 16mm dia with PTMT nuts, 300mm long for cold water with brass union on both sides to suit 15mm bore GI pipeand taking down old unserviceable one complete all as specified and as directed,

S & F shelf (minimum weight of 300 grms) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats all as specified and as directed.

S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) etc complete all as specified and as directed.

S & F in repair anodised aluminium alloy curtain rod of 20 mm size with fixing brackets, stops, rollers etc.complete all as specified and as directed.

S & F in repairs Stainless steel sink with draining board made out of 1.0 mm thick sheet fixed in kitchen or laboratory with plugs,washers and waste pipes; including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

S & F in repairs Stainless steel sink made out of 1.0 mm thick sheet fixed in kitchen or laboratory with plugs,washers and waste pipes; including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed.

S & F in repair brass chromium plated shower rose 125mm size with or without swivel joint,any size including fixing to union/ pipe etc complete all as specified and as directed.

S & F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.

S & F in repair squatting pan water closet orissa pattern, size 580x440mm, white with integral foot rest and trap, including connection to trap and to flushing pipe, antisyphonage pipe etc including making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan, etc complete all as specified and as directed..

S & F in repair vitreous china wash down water closet pan (pedestal pattern) with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan including all joints, connection to drain pipe and flush pipe complete all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle including brakcet and flush pipe 32 mm dia complete all as specified and as directed.

S & F in repair vitreous china, wash hand basin, white, flat back, size 580 x 450 mm including bracket, with waste pipe and waste coupling and cutting for and pinning in ends of brackets or erecting stand but incl fixing of waste pipe & brackets etc complete all as specified and as directed.

S & F in repair toilet paper holder vitreous china box type, white etc complete all as specified and as dircted.

M & L for 40mm thick Granite (of any type) work (table rubbed and polished) in steps,window-cills, cooking platforms and like over 20mm thick cement screed in cement mortar (1:6) including pointing in white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite. etc complete all as specified and as directed.

Demolition of Reinforced precast cement concrete manhole cover slab of any description and in any position including cleaning and segregation of reinforcement etc. and removing debris outside MD land all as specified and as directed.

Material and labour for pre cast cement concrete(1:2:4) type B1 (using 20mm graded stone aggregates) as in landings, cover slab for man holes chuulah hoods, chajjas, water troughs, and similar articles set in cement mortar (1:6) all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings etc complete all as speicifed and as direceted.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S & F in repair polycarbonate plain sheet 2mm thick one side Ultra Violet treated of approved quality fixed with self tapping screws or U hooks to steel frame etc complete all as speicified and as directed.

Dismantling of textile covering including frames (if any) and cover fillets (measured flat) etc complete all as speicified and as directed.

M & L anodized aluminium snap grid frame work for false ceiling all as specified size of grid 605x605mm with aluminium angle of 25x25x1mm, main 'T' of 38x25x1.5 mm and secondary 'T' of 25x25x1.2mm and 4 mm thick non asbestos cement E board fibre building boards, fixed or laid aluminium frame work with screws comple all as specified and as directed. Make: Everest, Ecco board or equivalent make approved by GE.

Elite Constructions