Supply Of Tractor for fodder cultivation ( Tractor 50 HP,Trolly 5TN,Rotovater 6Ft,Reversiable Mouldboard(MB)Plough)

Supply Of Tractor for fodder cultivation (Tractor 50 HP,Trolly 5TN,Rotovater 6Ft,Reversiable Mouldboard(MB)Plough)Equipment With Minimum Technical Specification Mentioned In The Bid Document.

Tractor 50 HP- • Engine Power: Minimum 50 HP • Cylinder Count: 3 or 4 cylinders operating inline. • Displacement / Capacity: Approx. 3,300 cc to 3,532 cc • Engine Rated RPM: Minimum 1850 to 2100 RPM. • Torque Rating: Approx. 220 Nm to 235 Nm for high pulling capacity. • Cooling System: Coolant-cooled system with an overflow reservoir. • Gearbox Configuration: 8 Forward + 2 Reverse or 12 Forward + 3 Reverse options. • Lifting Capacity: Robust 1,600 kg to 2,200 kg at lower link ends. • Wheel Drive: 2WD or 4 WD • Front Tyre Size: 7.50 × 16 (for 2WD) or 9.50 × 20 (for 4WD). • Rear Tyre Size: 14.9 × 28 or 16.9 × 28 for heavy-tillage stability.

Rotavator 6 Foot • Size / Working Width: 6 feet (approx. 180 cm to 195 cm working width) • Tractor Power Required: Approx. 40–60 HP • Blade Count: Typically 42 to 54 blades • Blade Type: L-type configuration • Gearbox Type: Multi-speed • Working Depth: 5 to 6 inches deep

Trolley 5 Ton • Standard Dimensions: 10 feet length × 6.5 feet width × 2 feet height (10' × 6' × 2') • Load Capacity: 5 Tons (approx. 5,000 kg payload) • Chassis Size: Typically heavy-duty channels measuring approx. 125 × 75 mm to 150 × 75 mm • Sheet Thickness: 3 mm mild steel for the bottom floor plate, 2 mm for the side panels • Tipping Mechanism: Heavy-duty double-acting hydraulic ram providing a tipping angle of up to 45 to 55 degrees • Axle Configuration: Single axle for a 2-wheel setup • Suspension System: Heavy-duty leaf spring assembly for smooth, vibration-free operations over uneven rural roads

Reversible Mouldboard (MB) Plough- • Power Source: Drawbar pull via Tractor Hydraulic Lift (3-Point Linkage) • Working Width: Approx. 2.5 to 3.5 feet (approx. 750 mm to 1050 mm) • Working Depth: 8 to 14 inches deep • Transmission Type: Hydraulic system using double-acting ram via SCV valve Speed: Approx. 3 to 5 km/h