SPECIAL REPAIRS TO BLDG NO P71 JCO MESS OF 35 FIELD REGIMENT AND PROVISION OF LOW SECURITY BOUNDARY WALL AROUND DEFI OTM ACCN NEW OFFRS MES FOR FD REGT AT MADUKKARAI MILITARY STATION UNDER GE WELLINGTON

Amount

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified and as directed. Note: Minimum thickness of powder coating shall be 50 micron

Anodised aluminium door shutters including powder coated, aluminium section weighing not less than 0.55Kg/mtr including necessary joining cleats, glazing cleaps, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screw, etc complete all as specified and directed.

Powder coated anodised aluminium window and ventilator shutters fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. complete all as specified. Note: Minimum thickness of powder coating shall be 50 micron

Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including stranded aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and as directed

12 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work complete all as specified and as directed.

Ground or obscured or frosted on one side sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in squares exc 0.50 sqm in each pane all as specified and directed.

Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares exceeding 0.50Sqm in each pane all as specified and directed

Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50Sqm in each pane all as specified and directed

2nd class hard wood wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

Flush shutters 30 mm thick, solid core construction with block board core and plywood face panels commercial type on both sides with decorative face veneers on both faces with lipping etc complete all as specified and as directed.

Second class Hard wood 30mm thick Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squares with plain chamfered or rounded, fitted with cut mitred beads for securing glass/gauze all as specified and directed. Note: Glazing and gauze will be measured seperately

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth incl preparation of surfaces all as specified and as directed

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory Made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed type C-21 with MS hinge pin 100 mm size all as specified and directed.

Extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and as directed

Aluminium anodised, barrel tower bolts of extruded section 150mm long and fixed complete all as specified and as directed

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Door closer aluminium (extruded section) body hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Pre-cast cement concrete block masonary with solid blocks, type C1, 1:3:6, 20 mm graded aggregate, exceeding 10 cm in width and setting in mortar, in CM 1:6 complete all as specified and as directed.

Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors/ dado etc complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level ) etc complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing coat of dado/ skirting complete all as specified and directed.

Vitrified coloured ceramic tiles 10mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match complete all as specified and as directed.

Vitrified coloured ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles n exc. 0.36 sqm,on vertical surface for skirting and dado etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match, complete all as specified and as directed

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface complete all as specified and as directed.

Terrazzo tiles 20cm x 20 cm x 20 mm thick, with size of chips upto 6mm, set jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement and pigments all as specified and as directed.

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment etc complete all as specified and as directed.

Dismantling/ Taking down existing hessian base felt or clay tiles or any other water proofing treatment from roof/chajja including dismantling existing old padding concrete of any thickness over the RCC slab other than beams, chajjas,staircase etc by chipping of with proper tool viz chiesel and with applying reasonable force so as to avoid any damages to existing RCC roof slab and remove the dismantled debris to a distance exceeding 1.50 Km but not exc 5 Km to out side the MD land etc complete all as specified and as directed.

Providing Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate average thickness 40mm as in levelling / padding course on roof slab, projections on similar surfaces existing with slope making the surface even and smooth without using extra cement all as specified and directed.

Material and labour for rendering cement plaster 10 mm thick in cement mortar 1:3 on fair faces of brick/ concrete faces finished even and fair with WPC @ 200 ml per bag of cement etc curved well at junction of wall and slab before laying of APP membrane complete all as specified and directed. Note: Supply WPC shall be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed.

Water proofing treatment using 4 mm thick APP modified water proofing membrane as per IS 1654 -2017/IS 16532-2017 consisting five layer membrane with features as specified weighing not less than 4.5 Kg per Sqm with non-woven polyester matt black finished weighning not less than 160 gm/sqm having softening point not less than 140 degree Celsius longitudinal tensile strength not less than 300 N/Sqcm laid over a coat of cold applied bituminous primer @ 0.4 Liters per sqm on surface.The APP modified membrane is laid by torching applications including sealing the overlap while torching with 100 mm on length side and 100 mm wide side as per manufacturer instructions and provide a finishing coat with solar reflective bituminous aluminum paint @ 0.1 Kg per sqm as prescribed by manufacturer as all specified and directed. Notes :- (i) Irrespective of lap the net covered area will only be measured for payment. (ii) The quoted rate is deemed to be inclusive of primer, APP membrane and Aluminium paint.

Taking down GI tubing 15mm bore medium grade and connections, complete all as specified and directed.

Taking down GI tubing 20mm bore medium grade and connections, complete all as specified and directed.

15mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors etc, any type complete all as specified and directed.

20mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors etc, any type complete all as specified and directed.

Supplying and laying of 16 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on wall/ ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on wall/ ceiling or laying in floors complete all as specified and as directed.

Complete removal of existing treatment and preparation of old surfaces of internal wall and applying two coats of distemper oil emulsion over a coat of primer including 1mm wall care putty complete all as specified and as directed.

Complete removal of existing treatment and preparation of old surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer including 1mm wall care putty complete all as specified and as directed.

Complete removal of existing treatment and preparation of old surfaces of external wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.9litre/10 Sqm over Old surfaces complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, Scrubbing down with water, etc and removal of debris and depositing where directed complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick/ solid block work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering in cement mortar 1:4 (10+5)=15mm thckness on brick/ cement/ stone surface and finishes the surface even and smooth without using extra cement including mixing with liquid WPC on top 5mm thick only all as specified and directed. Note: Water proofing compound shall be measured and paid seperately.

Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement on ceiling all as specified and as directed.

Preparation of new surfaces of internal wall and applying two coats of distemper oil emulsion over a coat of primer including 1mm wall care putty complete all as specified and as directed.

Preparation of new surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer including 1mm wall care putty complete all as specified and as directed.

Preparation of new surfaces of external wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.9litre/10 Sqm over new surfaces complete all as specified and as directed

Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to Timber frame work and fixed in repair complete all as specified.

Material and labour in repairs for 18-20mm thick granite (of any type) work (table rubbed and polished) for wash basin platform lain in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Vitreous china bowl urinal flat back (back or corner wall type), size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including fixed in repair all as specified and as directed.

Supplay and fix in repair china urinal partition white of size 310 x 710 mm all as specified and as directed.

Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

15mm bore CP bib tap cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

Stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed

Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats.(minimum weight 60gms) and fixed in repairs all as specified and as directed.

Chromium plated shower roses 125mm with swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

Shower arm 15mm size, 195mm long with bend of 45degree with flange of PTMT any colour. (Minimum weight 40gms) etc complete and fixed in repiars all as specified and as directed.

Swivel shower of PTMT any colour with 15mm dia pipe complete all as specified and as directed

Pillar taps, 15 mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws including fixed in repairs all as specified and directed.

Harrison curtain rails, mild steel, chromium plated with fixing bracket, stops, rollers etc fixed in repairs all as specified and directed.

Dismantling PVC water tank exceeding 250 ltrs and not exceeding 500 Ltr capacity from existing position all as specified and as directed.

Dismantling PVC water tank exceeding 500 ltrs and not exceeding 1000 Ltr capacity from existing position all as specified and as directed.

Rotational moulded polyethylene water storage tank of capacity 500 Ltr (cylindrical vertical with closed top) three layers hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed

Rotational moulded polyethylene water storage tank of capacity 1000 Ltr (cylindrical vertical with closed top) three layers hoisted and fixed in position with proper inlet and outlet connections all as specified and as directed

15 mm dia bore push tap any type high pressure of PTMT screwed for iron pipe and fixed suitable for urinals(Minimum weight 15mm-50 gms) and fixed in repairs all as specified and directed.

Supply and fix in repairs PVC (SWR) 110mm bore 'P' Trap all as specified and directed.

Vitreous china wash basin, white, flat back, of size 630x450mm including brackets including fixed in repairs all as specified and directed.

Brass valves 25mm dia bore ball, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule including fixed in repairs all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Flush pipe of chromium plated brass tube, 32 mm dia fixed in repairs all as specified and as directed.

PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets complete fixed in repairs all as specified and directed.

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete fixed in repairs all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete fixed in repairs all as specified and as directed.

PVC (SWR) junction single, (single T) equal or unequal of 110mm bore of pipe complete fixed in repairs all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete fixed in repairs all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete fixed in repairs all as specified and as directed.

PVC (SWR) vent cowl of 75 mm bore of pipe complete fixed in repairs all as specified and directed.

PVC (SWR) vent cowl of 110 mm bore of pipe complete fixed in repairs all as specified and directed.

Waste coupling 32 mm dia bore of PTMT (Half or full threaded) (Minimum weight 32mm-45gm/s) complete fixed in repairs all as specified and as directed.

Waste coupling 32 mm dia bore of PTMT (Half or full threaded) (Minimum weight 32mm-45gm/s) suitable for urinal all as specified and as directed.

Surface dressing not exceeding 15 cm deep and getting out in hard/ dense soil all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.50M in depth; for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and directed.

Reinforced cement concrete (Design Mix M-25) using 20mm graded stone agregate for Beams, cantilevers, bressumers, lintels over 1.5m Span, complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 6mm to 8mm dia of grade Fe-500/500D and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT bars 5mm dia and over cut and upto and including 10mm dia stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in bed blocks for hold fast plinth courses, coping, bed platesbenching/ haunching and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

Rendering 10mm thick on fair faces of block wall surfaces in cement mortar 1:4 for even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick on concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer approved colour/ shade complete all as specified and directed.

Posts and structs in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe- 290 Grade E-165 all as specified and as directed.

Applying two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide of any description not otherwise described over 10 cm width or girth icluding preparation of surfaces all as specified and as directed

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins,etc all as specified and as directed. Note :Each line wire to be measured

Concertina coil fencing with punched tape concertina coil 610 mm dia 10 m openable length (Total length 90 m), having 50 Nos rounds per 6 meter length, spring core wire (25 mm thick) of high tensile strength of 165 kg/Sqmm with tape (052 mm thick) and weight 43.47 gm/metre and fixing the same with existing Y-shaped angle iron placed 2 or 3m apart, stud tied with GI staples and GI clips to retain horizontal, including necessary bolts all as specified and directed. Note : Angle sections shall be measured and paid under separate items)

Broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in hard/ dense soil complete all as specified and directed

Removing excavated soil exceeding 50 m and not exceeding 250m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Taking down carefully point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with two runs of 1.5Sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 110V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked with conduit accessories concealed in wall/ floor and fixed on ceiling / roof/ truss/ columns etc, including provision of factory made branded galvanized steel pressed steel terminal box (modular metalflush box) 3mm thick of suitable module for housing the modular switches, sockets, fan regulator etc, complete concealed in walls and provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour for earthing continuity and connecting to common earth dolly etc complete for one light point controlled by one modular switch all as specified and complete.

All as per item No 112 hereinbefore but one ceiling/ exhaust fan point controlled by one moduler switch all as specified and directed.

All as per item No 112 hereinbefore but one three pin moduler switch socket 5/6 amps outlet on independent board all as specified and directed.

All as per item No 112 hereinbefore but for 2.5 Sqmm Single coare PVC insulated FRLSH cable 1100 Volts grated with multi stranded copper conductor IS:694: 1990 with ISI marking for housing 16A power point complete all as specified and directed.

Modular switch one way 6A 240V AC 50 HZ SP press type one module all as specified and directed.

Modular switch one way 16A 240V AC 50 HZ SP press type one module all as specified and directed.

Stepped type electronic fan regulator modular press type two module complete all as specified and directed.

Modular socket 2/3 pin combined 6Amps 240V AC 50 HZ SP two module all as specified and directed.

Modular socket outlet 2/3 pin, 16Amps 240V AC 50 HZ SP two module all as specified and directed.

Ceiling rose surface Bakelite three terminals 65x25mm PVC/ Polycarbonate isolated body all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp incuding connecting up with 3 core flexible coppe conductor cable of suitable size complete.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifie and directed.

LED light fitting 1x20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Exhaust fan of size 300mm sweep made of steel body heavy duty complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding, connecting up including provision of three core flexible copper wire of size 23/0.0076 from ceiling rose to ceiling fan all as specified and directed.

LED street light fittings 35 watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp bracket alongwith GI medium grade tube of 40mm dia, 1.5 metre long bend to shape 120 degree and 2 Nos of MS clamp 25 x 4mm of tube of 40mm dia, 1.5 metre long bend to shape 12 degree and 2 Nos of MS clamp 25x4mm of required length / size including nuts and bolts with one coat of red oxide & two coats of silver metllic paint fixed complete all as specified and directed.

MCB DB, SPN 4 way suitable for single phase 440 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCBs single/ double pole complete all as specified and directed.

MCB DB, SPN 12 way suitable for single phase 240 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCBs single/ double pole including dismantling of old existing complete all as specified and directed.

415V 10KA 'B' curve isolator four poles and 40 amps current carrying capacity in the DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing 240V 10KA 'B' curve miniature circuit breaker (MCB) of Single poles and current carrying capacity 5 to 32 AMP in the MCB DB complete with connected testing and commissioning all as specified and directed. Make: Make Havells / Legrand / C&S

Supply and fixing amp rating 240V 10KA 'B' curve miniature circuit breaker (MCB) of four poles (SPN) and 32 amps current carrying capacity in the MCB DB complete with connected testing and commissioning all as specified and directed. Make: Make Havells / Legrand / C&S

Supply and fixing 240V 10KA 'B' curve miniature circuit breaker (MCB) of single pole and neutral and current carrying capacity of 63 amps in the MCB DB complete with connected testing and commissioning all as specified and directed. Make: Make Havells / Legrand / C&S

Taking down sub main wiring of any size in any type all as specified and directed.

Taking down unserviceable main switch / DB with MCB of any type and capacity complete all as specified and directed.

Sub main wiring with two runs of single core 4 Sqmm copper conductor FRLS cable PVC insulated unsheathed multistanded 1100V grade drawn through PVC casing and capping with all accessories, fixed to wall ceiling etc including 4 Sqmm single core copper conductor FRLS cable PVC insulated, unsheathed multistranded 1100V grade as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note: 2 runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

Sub main wiring with two runs of single core 6 Sqmm copper conductor FRLS cable PVC insulated unsheathed multistanded 1100V grade drawn through PVC casing and capping with all accessories, fixed to wall ceiling etc including 6 Sqmm single core copper conductor FRLS cable PVC insulated, unsheathed multistranded 1100V grade as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note: 2 runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

Earthing complete with GI earth plate electrode 60x60cmx6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below normal ground level connected to GI earth wire 4mm dia protected by GI pipe light grade 15mm dia and connected to panel board / DB by means of bolts and nuts washers made out of GI all as shown in Electrical plate No 3 of SSR part I including necessary earth work and excavations in any type of soil, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 cover slab, reinforcement with 6mm dia MS bars at 100mm dia both ways, MS hook 6mm dia MS bars etc complete all as specified and directed.

Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of flexible cable from ceiling rose or connector to fan complete all as specified and directed.

SREE PARABRAHMA CONSTRUCTION

Krishna Engineering

UNIQUE INDIA CONSTRUCTIONS

S.RAMACHANDRAN

ABHISHEK CONSTRUCTIONS

p.chinnasamy

Reliance Sales Agency