CO Hospital and MCH Block building at Kather Tehsil and Distt. Solan HP. SH Providing E.I.

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

Wiring for twin control light point with 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit, 2 way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following size of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

3x4.0 Sq. mm.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-25 mm. dia

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface / recessed Steel/ PVC conduit as required. 1 run of cable

Supplying and fixing of 1 module UTP cat 6E information outlets toolless system for data and voice complete with connections, testing and commissioning etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing metal box for 8 module along with modular base and cover plate on surface/recess including providing and fixing 3Nos of S.P. 5 pin 5/6 amps modular socket outlet and one No 5/6 amps,modular type switch, connections, painting etc. as required.(Computer Point)

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing Call bell / buzzer suitable for single phase,230 volts complete as required.

Providing and installation of following surface mounting slim square/round type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Havells,Syska, Bajaj, C&S,wipro, Panasonic or any other approved by Engineer-in-Charge.

Square/ round LED Panel Light 6/7 W Surface

Square/ round LED Panel Light 12 W Surface

Square/ round LED Panel Light 15 W Surface

Square/ round LED Panel Light 18 W Surface

Square/ round LED Panel Light 24 W Surface

Square/ round LED Panel Light 30 W Surface

Square/ round LED Panel Light 36 W Surface

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V,50/60Hz, complete with all accessories, including mounting clamps,connections, testing etc. as required: Make Philips, Havells,Syska, Bajaj,C&S,wipro, Panasonic or any other approved by Engineer-in-Charge.

LED Batten Light 20W

Supplying and fixing of fancy Mirror/Dressing lights containing LED lamp holder(s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as requiredMake Philips, Havells, Bajaj,LED Lum, Jaquar,wipro, Panasonic or any other approved by Engineer-in-Charge..

Supplying and fixing of following LED bulk head fitting with all accessories including making connections, testing etc. as required. Make Philips, Havells,Syska, Bajaj,C&S,wipro, Panasonic or any other approved by Engineer-in-Charge.

LED bulk head 10W

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: Make Havells, Crompton greaves,Orient Usha, or any other approved by Engineer in charge

Ceiling Fan 900 mm sweep

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing and installation of Light duty, plastic body, Ventilating Fan, Light duty, (Plastic body) 250 mm sweep in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Orient, Bajaj, Crompton Greaves, Usha, or any other approved by Engineer-in-charge.

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: Make: Orient, Crompton greaves, Havells or any other approved by Engineer in charge.

Exhaust Fan, Heavy duty, 300 mm sweep

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required.Make Havells, Crompton greaves,Bajaj,Jaquar or any other approved by Engineer in charge.

10 Liter capacity water heater (Cat-A)

25 Liter capacity water heater (Cat-A)

35 Liter capacity water heater (Cat-A)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

8 way , Double door

12 way , Double door

Supplying and fixing of following ways surface/ recess mounting, 7 Segment415 volts, TPN MCB distribution board of sheet steel, dust protected,duly powder painted, with provision to mount MCCB incomer, 4 module subincomer in each phase and SP MCBs as outgoing (but without MCB ’s and incomer), complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. as required.Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

Double door-8 way (MCCB+12+24),7-segment

Providing and fixing following rating and breaking capacity 4 pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubicle panel, making connections, etc. as required.Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

MCCB 100 Amp 30 KA 4 Pole

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make Hager, Schenider, Havells, L&T, ABB or as approved by Engineer-in-Charge.

Single pole

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts,10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.MCB DP 50/63 A 'C' curve.Make Hager,Schenider, Havells,L&T,ABB or as approved by Engineer-in-Charge.

Supplying and fixing following rating, double pole, (single phase and neutral) 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 Amp. Make Hager, Schenider, Havells, L&T, ABB or as approved by Engineer-in-Charge.

Supplying & fixing, testing, commisioning of storage type water cooler with reciprocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/ galvanized steel body. Total storage capacity 80 Lt. and cooling capacity 40 Lt/Hr with 2 Nos of faucets and all accessories etc.Make Usha, Blue Star, Carrier or its equivalent make.

Supplying and fixing of Surge Protection devices against indirect lightning and switching surges (1P + N) 240/415 volts, I max 15 kA, “C” curve, SPD suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.SPD DP. Make Hager, Schenider, Havells, L&T, ABB or as approved by Engineer-in-Charge.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

Supplying and erection floor sub- panel made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 63 Amp. MCCB with 63 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection floor sub- panel made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 100 Amp. MCCB with 100 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection floor sub- panel Amp made from 1.6mm thick M.S. sheet steel duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to house 125 Amp. MCCB with 125 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection of following depth sheet metal heating sub panel cubical (pedestal)of suitable dimension thick m.s angle iron frame, covered with 1.6mm thick m.s. sheet duly welded an five side and front side hinged complete with locking arrangment with sufficient no vertical and horizontal intermediate switch gear supporting members each of M.S. of suitable length duly welded. The cubical pedestal have cable entry box at one or two side and 4 nos. legs of M.S. angle iron each etc. long i/c power coated painting and bonding to the existing earth etc. The cubical pedestal consists of following switchgear units (S/F 1 No. MCCB 800 Amp F/Pole Main control, 6 No. MCCB 63 Amp F/Pole for floor heating feeders, 5 Nos. MCCB 100 Amp F/Pole for floor heating feeders , 1 No. MCCB 125 Amp F/Pole for floor heating feeders copper bus bar 800 Amp, Over voltage protection device, VAF Meter Digital, CTs and indicators complete in all respects)

Supplying and erection of following depth sheet metal heating sub panel cubical panel(pedestal)of suitable dimension thick m.s angle iron frame, covered with 1.6mm thick m.s. sheet duly welded an five side and front side hinged complete with locking arrangment with sufficient no vertical and horizontal intermediate switch gear supporting members each of M.S. of suitable length duly welded. The cubical pedestal have cable entry box at one or two side and 4 nos. legs of M.S. angle iron each etc. long i/c power coated painting and bonding to the existing earth etc. The cubical pedestal consists of following switchgear units (S/F 1 No. MCCB 500 Amp F/Pole Main control, 5 No. MCCB 63 Amp F/Pole for floor heating feeders, 5 Nos. MCCB 100 Amp F/Pole for floor heating feeders , copper bus bar 500 Amp, Over voltage protection device, VAF Meter Digital, CTs and indicators complete in all respects)

Supplying and erection of following depth sheet metal light sub panel cubical (pedestal)of suitable dimension thick m.s angle iron frame, covered with 1.6mm thick m.s. sheet duly welded an five side and front side hinged complete with locking arrangment with sufficient no vertical and horizontal intermediate switch gear supporting members each of M.S. of suitable length duly welded. The cubical pedestal have cable entry box at one or two side and 4 nos. legs of M.S. angle iron each etc. long i/c power coated painting and bonding to the existing earth etc. The cubical pedestal consists of following switchgear units (S/F 1 No. MCCB 630 Amp F/Pole Main control, Change over 630 Amp., 7 No. MCCB 63 Amp F/Pole for floor light feeders, 7 No. MCCB 100 Amp F/Pole for floor light feeders, copper bus bar 630 Amp,Over voltage protection device, VAF Meter Digital, CTs and indicators complete in all respects)

Supplying and erection of following depth sheet metal light sub panel panel(pedestal)of suitable dimension thick m.s angle iron frame, covered with 1.6mm thick m.s. sheet duly welded an five side and front side hinged complete with locking arrangment with sufficient no vertical and horizontal intermediate switch gear supporting members each of M.S. of suitable length duly welded. The cubical pedestal have cable entry box at one or two side and 4 nos. legs of M.S. angle iron each etc. long i/c power coated painting and bonding to the existing earth etc. The cubical pedestal consists of following switchgear units (S/F 1 No. MCCB 500 Amp F/Pole Main control, Change over 500 Amp., 11 No. MCCB 63 Amp F/Pole for floor light feeders, 3 No. MCCB 100 Amp F/Pole for floor light feeders, copper bus bar 500 Amp,over voltage protection device, VAF Meter Digital, CTs and indicators complete in all respects)

Supplying and fixing of chemical earhting system consisting of copper earhing electrode of 3 mtr length,50 mm dia with 2 bags of ground enhancing coumpound incluing making connections,testing etc as required.Make Uniearth/ABB or make approved by engineer-in- charge.

Providing and fixing 6SWG dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing 25 mm X 3mm copper strip on surface or in recess for connections etc in as required.

Supply, Installation, testing and Commissioning of Early Streamer Emission, Air Terminal compliant to the last NFC 17 - 102:2011 standard. The Unit should be autonomous, with an electrostatic activation adapted to the earth electric field, warranted for 7 years by the manufacturer. The air terminal shall be made of+B16 non-corrosive materials. It shall be equipped with a central rod made of stainless steel 316L for a better conduction and a low corrosion factor. Performances of the unit should be certified in High Voltage and High Current Laboratory (CPRI and GERAC) as well as in real lighting conditions. The unit should have been tested in rain condition in order to ensure the good insulation of the emission device (the insulation should not be lower than 97%).The unit should have passed electrical test at 200 kA in 10/350μs waveform.Make:-FRANCE PARATONNERRES Ioniflash Mach NG 60/ABB or its equivalent approved by the Engineer-in-charge.

Supply, Installation, testing and Commissioning of Elevation pole made of G. I. of 5 meter height with a dia of 50mm with a M20 thread at the top to fix the unit. Base Plate, clamps and all required fixing should also be supplied. Guy wires may be used in order to ensure the stability of the installation.

Supply, Installation, testing and Commissioning of Down Conductor made of copper for lower impedence. It should be a single core cable of minimum cross sectional area of 70 mm².

Installation of a lightning strike counter on the down-conductor. The unit should be autonomous and compliant to the IEC 62561-6. The counter should be able to register the lightning events from 1 KA to 100 KA. The counter should be at least with the index protection IP66. Make:-FRANCE PARATONNERRES/ IONICOUNT/ABB or its equivalent approved by the Engineer-in-charge,

Providing the earth pit cover with dimensions 300 mm x 300mm x 220mm of heavy duty type made of FRP with a openable lid for periodic inspection of the earth pit.

Supplying and fixing of LED street light 45 W versatile pressure die-cast alluminium housing with UV stablized PC IP diffuser for better light distribution alongwith electronic driver,complete with all accessories including making connections, testing etc. as required. Make:- C&S, Wipro, Philips, Panasonic,Bajaj or any other approved by Engineer-in-Charge.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 32 mm dia. G.I. pipe, heavy class

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Make KEI, Havells,Polycab,or as approved by Engineer-in-Charge.

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 70 sq. mm (3.5 core)

Armoured cable 630 sq. mm (3.5 core)

Armoured cable 800 sq. mm (1 core)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930,Part II complete with fitting and cutting, jointing etc. in the existing trench,complete as required.Make: Telerex/ Astral/Precesion/Supreme or any other approved by Engineer-in-Charge.

75 mm dia

160 mm dia

Supply, Fabricating and installation following size of perforated GI cable trays including horizontal and vertical GI bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting etc. complete as required & approved by the Engineer In Charge.Make MG cable Tray, Manibhadra Electrical,Rico, Indiana, Profab or any other approved by Engineer-in-charge.

300 mm. Width x 50mm. Depth x 1.5mm. Thickness.

450 mm. Width x 50mm. Depth x 1.5mm. Thickness.

Supplying and fixing of fancy wall bracket single lamp suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: Make Havells, Bajaj, Jaquar,Philips or any other approved by Engineer-in-charge.

Supplying and fixing of 4 module LED foot light warm white suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories including making connections, testing etc. as required.Make Havells, Philips, Legrand, LED Lum or any other approved by Engineer-in-charge.

Providing and installation of LED 9 W retrofit lamp B-22/E-27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips, Syska, Havells, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

SITC of 2 Ton Hot and cold split type AC( 3/4 star rating) copper condenser including stabilizer and making connections testing etc.complete in all respects. Make Voltas, Hitachi, O General, Daikin, Mitsubishi, or any other approved by Engineer-in-charge.

SITC of voltage Stablizer for split type wall mounted Air conditioner including making connections testing etc. complete in all respects. Make:-V-Guard, Godrej,Microtek or any other approved by Engineer-in-charge.

Supplying and fixing of Copper refrigerant piping with sleeve 1/2x1/4 inches with control cabling beyond 0 running meter for (Hi-wall split unit) with sleeves insulation etc. complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of PVC drain pipe for (Hi-wall split unit) complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of M.S stand for out door unit of suitable size (Readymade) complete in all respects with best satisfactions of Er-in-Charge.

SITC of Nurse call system control unit with in built digital display indicator panel nurses station to indicate the bed no. on the assistance req. by the patient with simultaneous audio visual alarm on the nursing station.Make Veekay, RS, Schrack

SITC of call bell bed side unit it consists of indicator with call reset button. Make Veekay, RS, Schrack

SITC of Patient hand module consisting of recessed 1 Nos call buttons for calling nurse including 2 mtr flexible cord.Make Veekay, RS, Schrack

SITC of Toilet Pull cord for patient while they are in emergency. It consists of indicator with call reset button.Make Veekay, RS, Schrack

SITC of Door indication consisting of one Nos indicator to indicate the status of the patients call.Make Veekay, RS, Schrack

Supplying & fixing, testing, commisioning of PIR occupancy sensor with day light sensing, adjustable time delay, 6 mtr dia detection,10 Amp AC surface mounted complete in all respect. Make Hager, ABB, Wipro or as approved by Engineer-in-Charge.

SHARMA ELECTRICAL CO.