Balance work of Sanitary, plumbing, External weather coat, Bulk Oil tank at District Hospital Shopian

Amount

Application of internal cement sand plaster of thickness 15mm with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement, sand.

Application of External cement sand plaster of thickness 15mmwith a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement, sand.

Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:3 :4 (1 cement : 3 coarse sand : 4 graded stone aggregate 20 mm nominal size. .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:3 :6 (1 cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size. .

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 11.51.1 In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing of 1st class Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessaryscrews excluding cost of panelling which will be paid separately.

Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coats with Metal primerWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Applying priming coats with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm.

A.SALT AND PEPPER

B. RUBY RED GRANITE 16mm TO 18mm THICK

C.BLACK GRANITE 16mm TO 18mm THICK

D.RUBY RED GRANITE TILE 8MM THICK

E. SALT AND PEPPER GRANITE TILE 8MM THICK

Providing and fixing of MILD steel Grill panels fabricated from mild steel sections(square bars,flats,ISA ETC.) inclusive electric, machinery charges, adhesives like araldite complete job.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Columns,Walls Pillars, Piers, Abutments, Posts and Struts

P/F of below mentioned CP fittings(Jaquar series)or equivalent including c/o screws electric and machinery charges complete job..

CP Brass Sink MIXER(jaquar/marc)

CP Brass Wall MIXER(jaquar/marc)

CP Brass Basin MIXER(jaquar/marc)

CP Brass Bibcock(jaquar/marc)

CP Brass Angle valve(jaquar/marc)

CP Brass Nipples 15mm dia and 20 mm long

CP Brass Grating

CP Brass Soap case

CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws

Health Faucet (jaquar/marc)

Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge.

15mm Dia GI Pipe(.5'inch)Medium

20mm Dia GI Pipe (.75'inch))Medium

Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge.

Ball valve (1")

Ball valve (1 1/4")

Union (1")

Union (1 1/4")

Tank nipple (1")

Tank nipple (1 1/4")

Ball cock

Providing and fixing of sintex/comfort or equivalent overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment.

Providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job.

160mm OD UPVC Prince B Type

110mm OD UPVC Prince B Type

75mm OD UPVC Prince B Type

Supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent.

4"floor trap

4" p trap

4"door bend

4"door T

4" Cowel

3" door bend

3" door Tee

3"floor trap

Providing and fixing of Builders Hardware including cost of screws.

AlUMUNIUM Aldrops 10"

AlUMUNIUM Tower Bolts 6"

AlUMUNIUM Handles 4"

AlUMUNIUM Handles 5"

AlUMUNIUM Tower Bolts 4"

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects

Providing and fixing of water pump 1.0 H.P including starter and all accessories (compton greaves or Kirloskar make)

Providing and fixing of storage type vertical hot water heater (Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable, 3 pin plug top,15mm dia PVC connections at the outlet (Venus, Racold, Havells) make 50 LTR. Capacity

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. complete. 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed. Incl cost of 50 mm thick glass strips.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc.including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Killogram 573.50 as nuts, bolts, fasteners etc.10mm

Providing and fixing of 4mm thick glass pans including cost of beading 25mm wide and 15mm thick incl cost of nails

Providing and fixing of 5mm thick glass pans including cost of ALUMUNIUM beading in alumunium partition and door/ window /ventilator shutters.

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement

Extra for Rough cast plastering exterior walls of the height more than 10m from ground level for every additional height of 3m or part thereof.

Supply and Apllication of Apex ultima asian brand exterior weather coat of approved computerized shade and colour in more than two coats over water primer ..

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) shade according to IS:1868, minimum anodic coating of grade AC 15) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Bricks work with common burnt clay F.P.S (non modular) bricks of class desi- 75 in superstructure including extra charges above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 :6(1 cement : 6 coarse sand)

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.

Providing and fixing PTMT stop cock of approved quality and color 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms.

Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.19.53.1 15mm nominal bore, 105mm long, weighing not less than 138gms.

PTMT Ball cock 20mm nominal bore, 120mm long, weighing not less than198gms.

PTMT Ball cock 25mm nominal bore, 152mm long, weighing not less than 440gms

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 15 mm nominal bore, weighing not less than 32gms

PTMT extension nipple 20 mm nominal bore, weighing not less than 40gms

PTMT extension nipple 25 mm nominal bore, weighing not less than 62gms

engagement of muncipal sucker for evacuation of manholes and septic tanks including fuel oil and operating and disposal charges

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

Bricks work with common burnt clay F.P.S (non modular) bricks of class desi- 75 in superstructure including extra charges above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 :6(1 cement : 6 coarse sand)

Refixing of water storage tanks on ground in the attics as demanded by the hospital authority including cost of fittings like elbows,tees etc.

Disposal of excavated material from site to site of disposal by mechanical means upto 6 km.

Providing and fixing of 3.5 to 4mm thick glass pans including cost of beading 25mm wide and 15mm thick incl cost of nails

Providing and fixing of 5mm thick glass pans including cost of alumunium beading 25mm wide and 15mm thick incl cost of nails

Providing and fixing of 3.5 to 5mm thick fancy and coloured glass pans including cost of beading 25mm wide and 15mm thick incl cost of nails

Providing and fixing of MS STEEL Clamps for PVC WASTE Water and Wcpipes at any height of the buliding upto 30 mtr ht incl scafffolding cost of nails and screws and dash fastners wherever necessary

ASHAQ HUSSAIN SHAH

M/S AZIZ KASHMIRI AND CO

FAYAZ AHMAD DAR

ROHAIL RASHID PARRAY