Repair and renovation of MIG House No.140 and 141 Instead of 139 and 140 for the residence of HP Pollution of HP Pollution and Environmental Central Board in Sector IV at Parwanoo, District Solan HP ie Internal WS and SI Remaining Work

Amount

Excavation

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) i/c carriage of material in all leads & lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:: Cement Mortar 1:6 (1 cement : 6 coarse sand) i/c carriage of material in all leads & lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) i/c carriage of material in all leads & lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) i/c carriage of material in all leads & lifts.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required i/c carriage of material in all leads & lifts.Approved make of SAIL/RINL.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. Confirming to BIS specification.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate i/c carriage of material in all leads & lifts.

Providing and laying Ceramic/ Digital glazed wall tiles of any size in skirting, rising of steps and dado upto all heights (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours such as White, Ivory, Grey, Fume Red Brown, laid on 12 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete i/c carriage of material in all leads & lifts. Approved make of Kajaria/ Orient/Somany.

Providing and laying rectified Glazed Ceramic/ anti acid floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matchingpigments etc., complete i/c carriage of material in all leads & lifts. Approved make of Kajaria/ Orient/ Somany.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free mortar drops, loose materials and other foreign matters sand papered smooth to give matt finish to the surface complete i/c carriage of material in all leads & lifts.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) i/c carriage of material in all leads & lifts.

20 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) i/c carriage of material in all leads & lifts.

Providing & fixing 35mm flush door shutters core of black board construction with frame of 1st class hard wood and well matched first class Indian teak ply veneering with vertical grains of ross band and face vaneers on one face and commercial ply veneering with vertical grains band on other face of shutters including ISI marked Stainless Steel butt hinges with necessary screws i/c carriage of material in all leads & lifts.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete i/c carriage of material in all leads & lifts.250x16 mm

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete i/c carriage of material in all leads & lifts. 150 X 10mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete i/c carriage of material in all leads & lifts.

Providing and fixing bright finished brass hard drawn hooks and eyes i/c carriage of material in all leads & lifts. 150 mm.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material upto all leads as per direction of Engineer-in-charge.In mud mortar i/c carriage of material in all leads & lifts.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture i/c carriage of material in all leads & lifts.Approved make of Asian/ Nerolac/Berger.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture i/c arriage of material in all leads & lifts. Approved make of Asian/ Nerolac/Berger/ Asian.

Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 i/c carriage of material in all leads & lifts.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives i/c carriage of material in all leads & lifts.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. i/c carriage of material in all leads & lifts. Approved make Jindal Hisar/ Tata. 15 mm dia nominal bore

Providing & fixing PVC spigot and socket soil waste and ventilating pipes including carriage of material in all leads & lifts.Approved make of Finolax/ D-Plast/ Supreme: Confirming to BIS specifications.

75mm nominal bore

100mm nominal bore

Providing & fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete carriage of material in all leads & lifts. Approved make of Finolax/ D-Plast/ Supreme: Confirming to BIS specifications.

75mm nominal bore

100mm nominal bore

Providing & fixing PVC door bend with oval access ddor, insertion rubber washer 3mm thick bolts and nuts ISI marked completew inluding carriage of material in all leads & lifts. Approved make of Finolax/ D-Plast/ Supreme: Confirming to BIS specifications.

75mm nominal bore

100mm nominal bore

Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts. Approved make of Finolax/ D-Plast/ Supreme: Confirming to BIS specifications.

75mm nominal bore

100mm nominal bore

Providing & fixing single equal plain junction of required degree. Approved make of Finolax/ D-Plast/ Supreme: Confirming to BIS specifications.

75mm nominal bore

100mm nominal bore

Proving and fixing collars of approved make ISI marked including fixing with approved adhesive including carriae of material in all leads & lifts. Approved make of Finolax/ D-Plast/ Supreme: Confirming to BIS specifications.

75mm nominal bore

100mm nominal bore

Proving and fixing PVC Cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads & lifts.Approved make of Finolax/ D-Plast/ Supreme: Confirming to BIS specifications.

75mm nominal bore

100mm nominal bore

Rakesh Kumar Singla