Construction of ADCI office Building (G and 1)Top Floor Assam Type at Parbatjhor Kokrajhar

Amount

Main Building 2.8 Earth workinexcavation bymechanical means (Hydraulicexcavator) /manual means in foundation trenches or drains (not exceeding 1.5 min width or10 sqm on plan), includingdressing of sides and ramming of bottoms,liftupto1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50m. 2.8.1 Allkinds of soil. Col-- 30x2.00x2.00x1.80= 216.00 m3 Sub. 7x1.50x1.50x1.50= 23.53m3 Tank… 1x5.00x2.05x1.80= 18.45m3 Pit – 1x15.00x0.90.0.90= 12.15m3 Steps—1x4.26x0.90x0.15= 0.575m3 T= 270.8m3

16.12 Dry brick pitching halfbrickthick indrainsincluding supply of bricksand preparing thesurface complete : 16.12.1 Withcommon burnt clayF.P.S. (non modular)bricks ofclass designation 7.5 Col---- 30x2.00x2.00 = 120.00 m2 Sub—7x1.50x1.50 = 15.75 m2 Step -1x4.26x0.90= 3.83m2 Tank- 1x5.00x2.00=10.00m2 Pit - 2x15.00x 0.96= 27.00m2 Floor – 1x21.31x10.04= 213.95m2 Forch –1x4.26x4.26= 18.15m2 T=408.68m2

4.1 Providing andlaying in position cementconcrete of specified grade excluding the cost ofcentering andshuttering - Allwork uptoplinth level : 4.1.8 = 1:4:8 (1 Cement :4coarse sand(zone-III)derived fromnaturalsources : 8gradedstoneaggregate 40 mm nominalsizederived fromnaturalsources) Col—30x2.00x2.00x0.10= 12.000m3 Sub- 7x1.50x1.50x0.10= 1.575m3 Step – 1x4.26x0.90x0.075= 0.288m3 Tank – 1x5.00x2.00x0.15=1.500m3 Pit – 1x15x0.90x0.10= 1.350m3 T= 16.713m3

5.22 Steelreinforcement for R.C.C. workincluding straightening, cutting,bending,placing inposition andbinding allcomplete uptoplinth level. 5.22.6 Thermo-MechanicallyTreated bars of gradeFe-500D or more.

5.9 Centering andshuttering including strutting,propping etc. and removal of form for 5.9.1 Foundations,footings,basesof columns, etc. for mass concrete

5.9.5 Lintels,beams,plinth beams, girders, bressumersand cantilevers

5.9.6 Columns,Pillars, Piers, Abutments, Postsand Struts

5.9.3 Suspended floors,roofs, landings, balconies and access platform

5.9.7 Stairs, (excluding landings) exceptspiral-staircases

5.1 Providing andlaying in position specified grade of reinforced cement concrete,excluding thecost of centering, shuttering,finishing and reinforcement -All work up to plinth level : 5.1.2 1:1.5:3 (1 cement:1.5 coarse sand (zone-III)derived fromnaturalsources : 3gradedstoneaggregate 20 mm nominal size derived fromnaturalsources) Col- Base= 30x1.70x1.70x0.20=17.340m3 30x1.70x0.30x0.30= 13.410m3 30x1.075x0.30x0.30= 2.903m3 Sub-- 7x1,50x1.50x0.15=2.363m3 7x1.50x0.30x0.20=1.638m3 7x0.975x0.20x0.20=0.273m3 P/B---- 2X21.31X0.30X0.30=3.836m3 1x2.13x0.30x0.30=0.192m3 1x6.39x0.30x0.30=0.575m3 1x8.52x0.30x0.30=0.767m3 2x4.26x0.30x0.30=0.767m3 1x8.53x0.30x0.30=0.764m3 1x6.40x0.30x0.30=0.576m3 2x3.65x0.30x0.30=o.657m3 4x10.04x0.30x0.30=3.614m3 1x6.39x0.30x0.30=0.575m3 1x5.78x0.30x0.30=0.520m3 1x5.78x0.30x0.30=0.520m3 2x2.44x0.30x0.30=0.439m3 1x4.26x0.30x0.30=0.383m3 2x4.26x0.30x0.30=0.767m2 Forch P/B-- 3X4.26X0.30X0.30=1.150M3 T= 37.773m3

5.2 Reinforced cementconcrete work inwalls (anythickness),including attached pilasters,buttresses,plinth and string courses, fillets,columns,pillars,piers, abutments, postsandstruts etc. above plinth level upto floorfive level, excluding cost of centering,shuttering,finishing andreinforcement : 5.2.2 1:1.5:3 (1 cement :1.5 coarsesand (zone-III) derived from naturalsources :3gradedstoneaggregate 20 mm nominal size derived from natural sources) G.Floor m/post- 30x4.00x0.30x0.30=10.800m3 Sub-- 7x4.00x0.20x0.20=1.12m3 m-1st floor--- 23x4.00x0.30x0.30=8.23m3 Sub---- 6x4.00x0.20x0.20=0.96m3 T= 21.110M3

5.3 Reinforced cementconcrete work in beams,suspended floors, roofs having slope up to 15°landings,balconies, shelves, chajjas,lintels,bands,plainwindowsills,staircasesand spiralstair casesabove plinth level upto floorfive level, excludingthe cost of centering,shuttering,finishing andre inforcement with1:1.5:3 (1 cement :1.5 coarsesand(zone-III)derived fromnatural sources: 3graded stoneaggregate 20 mm nominalsizederived fromnaturalsources).

6.1 Brick workwithcommon burnt clay F.P.S. (nonmodular)bricks of class designation 7.5 infoundation andplinth in: 6.1.1 Cement mortar1:4 (1cement:4coarsesand)

2.27 Supplying andfilling in plinth with sandunderfloors, including watering, ramming,consolidating and dressing complete.

4.10 Providing andlaying damp-proof course 40mm thick with cementconcrete 1:2:4(1 cement:2 coarse sand(zone-III) derived fromnatural sources: 4graded stone aggregate 12.5 mm nominal size derived from natural sources)

6.12 Half brickmasonry with common burnt clay F.P.S.(non modular)bricks ofclass designation 7.5 infoundations and plinth in: 6.12.1 Cement mortar1:3 (1cement: 3coarse sand)

13.2 15 mm cement plasteron therough side of single orhalf brick wall of mix: 13.2.1 1:4 (1 cement: 4finesand)

13.4 12 mm cement plasterofmix: 13.4.1 1:4 (1 cement: 4coarse sand)

11.6 Cement plasterskirting up to 30 cm height,withcementmortar 1:3 (1 cement :3coarsesand),finished withafloating coat of neatcement. 11.6.1 18 mm thick

10.16 Steel workin builtup tubular (round,squareor rectangular hollowtubes etc.) trusses etc.,including cutting, hoisting, fixing in position andapplying a priming coatof approved steel primer, including welding and bolted with special shaped washers etc.complete. 10.16.1 Hot finished welded typetubes

12.65 Providing &fixing atall heights, levelsandlocationscolour finish Aluminium alloy roofingsheets ofalloy IS designation 31500, temper Hx8conforming to IS 737 anddimensions asperIScode 2676 with characteristics ofgood formability and corrosion resistance.Theprofilesheets shallbefixedtotruss members in slope or required pitch or curvature with Hex capheadedself drilling/tapping Stainless steel screws M6, 50mm longwith3mm EPDM sealwasheretc. all inclusiveof labour,scaffolding,T&Pandsundries etc. complete as perdirections of theEngineer-In-Charge.(Cost of truss/framework shall bepaidseparately). 12.65.3 0.91mm, AluminiumColorcoated troughed profile with center to centerpitch of200 mm,depth of32 mm,overall profilewidth1092 mm,cover width 1000mm.

12.66 Providing andfixing of Pre-coatedcolour or millfinishAluminiumRoofingAccessories in 0.71mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy(AA) 3004 (ISOdesignation)]For color,coating shallbe5-7microns epoxyprimer on bothsides of thesheetandpolyestertopcoat 15-18 microns, using self drilling/tappingSS screws of size 6 x 50mmwith3mmthick EPDM sealandSS plain washer complete: 12.66.1 Precoated/mill finish aluminium Ridges plain (500-600mm)

12.66.4 Precoated/mill finish aluminium Barge board(Upto200 mm)

12.45 made of special sections ,power pressed fromM.S.sheets andgalvanized with zinc coatingof120 gms/sqm(both side inclusive) as perIS:277 and consisting of anglecleats of size 25mm wide x1.6 mm thick with flanges of 27 mm and37mm,at 1200 mmcentre tocentre,oneflangefixed totheceiling with dashfastener 12.5 mm dia x50mm longwith 6mm dia bolts, other flange ofcleat fixed totheanglehangersof 25x10x0.50mm of required length with nuts&boltsofrequiredsize andother end of anglehangerfixed with intermediate G.I.channels 45x15x0.9mm running at the spacing of 1200 mm centre tocentre, towhich theceiling section0.5mm thick bottom wedge of80mm with tapered flanges of 26 mmeach having lips of 10.5 mm, at 450mm centre tocentre, shall befixed ina direction perpendicular toG.I.intermediatechannelwith connecting clipsmade out of 2.64mm dia x 230mm longG.I.wireat every junction,including fixingperimeterchannels 0.5 mm thick 27 mm highhavingflanges of20mm and30mm long,theperimeterof ceiling fixed towall/partition with thehelp ofrawl plugsat 450mm centre,with 25mm long drywallscrews @230 mm interval,including fixing of gypsumboardto ceiling sectionandperimeterchannel with thehelp of dry wall screws of size3.5 x 25mm at 230 mmc/c, including jointing and finishing to aflush finish of tapered andsquareedges of the boardwith recommended jointingcompound , jointing tapes, finishing with jointingcompound in3layerscovering upto150mm on both sidesof jointand twocoats ofprimersuitableforboard,all as permanufacturer'sspecification andalsoincluding the costofmakingopenings forlightfittings,grills,diffusers,cutoutsmade with frame of perimeterchannelssuitablyfixed, allcomplete asperdrawings,specification and direction of 12.45.1 12.5 mm thick taperededgegypsumplain board conforming to IS:2095-(Part I) :2011(BoardwithBIS certification marks)

9.1 Providing woodworkin frames ofdoors, windows,clerestory windowsand other frames,wroughtframed andfixed in position with hold fastlugs orwith dashfasteners of requireddia &length (hold fastlugs or dash fastener shallbepaid for separately). 9.1.2 Sal wood

9.119 Providing andfixing factorymadeP.V.C. door frameof size 50x47mm withawall thicknessof5 mm, madeout of extruded 5mmrigidPVC foamsheet, mitredat cornersand joined with2 Nosof 150 mm long brackets of 15x15 mmM.S. squaretube, the verticaldoor frameprofiles tobereinforced with19x19 mm M.S.squaretube of 19 gauge, EPDM rubbergasketweather seal tobeprovided through out the frame. The doorframe tobefixedtothe wallusing M.S. screws of 65/100 mmsize, complete as per manufacturer’s specification and direction of Engineerin-Charge.

9.129 Providing andfixing factory made panel PVCdoorshutterconsisting of framemade out of M.S. tubes of 19 gaugethicknessand sizeof19 mmx 19 mm forstyles and 15x15mm fortop& bottom rails.M.S. frameshall havea coat of steelprimers of approved make and manufacture.M.S. frame covered with5mm thickheatmoulded PVC 'C' channel of size30mm thickness, 70 mmwidth out of which 50 mm shallbeflat and20mm shallbetapered in 45 degree angleon both sideforming styles and 5mmthick, 95 mm widePVC sheet outofwhich75mm shallbeflat and20 mmshallbetapered in45 degree on the inner side to form top and bottom rail and115 mm widePVC sheet outof which75 mm shallbeflat and20mm shallbetapered on both sides toform lock rail. Top, bottom andlockrails shallbeprovided both side of thepanel. 10 mm(5 mm x2) thick, 20mm widecross PVC sheetbeprovided as gap insertfor toprail&bottom rail,paneling of5 mm thickboth sidePVCsheettobefitted in the M.S. framewelded/sealedto thestyles &rails with 7mm (5mm+2mm)thick x 15 mmwidePVC sheetbeading on innerside,and joined together with solventcement adhesive. An additional 5 mm thick PVC strip of20mm width is to bestuck on theinteriorside of the'C' Channelusing PVC solvent adhesive etc. completeas perdirection of Engineer-in charge, manufacturer's specification &drawing. 9.120.1 30 mm thick plain PVCdoor shutters

21.1 Providing andfixing doubleglazed hermeticallysealed glazing in aluminiumwindows,ventilators andpartition etc.with6 mm thick clear floatglassboth side,having12mm airgap,including providing EPDMgasket, perforated aluminiumspacers,desiccants, sealant(Both primaryand secondarysealant) etc. as perspecifications,drawings and direction ofEngineer-in-charge complete.

4.1 Providing andlaying in position cementconcrete of specified grad eexcluding the cost ofcentering andshuttering - Allwork uptoplinth level : 4.1.5 1:3:6 (1 Cement :3coarse sand(zone-III)derived fromnaturalsources : 6graded stone aggregate 20 mm nominal size derived from natural sources)

11.41 Providing andlaying vitrified floor tiles indifferentsizes(thickness tobe specified by themanufacturer) withwater absorption less than0.08% andconforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar1:4 (1cement:4 coarse sand),jointing withgrey cement slurry@ 3.3 kg/sq mincluding grouting thejointswith white cementand matching pigments etc.,complete 11.41.2 Size of Tile 600x600mm

11.16 Precast terrazotiles 22mm thick with gradedmarblechips of sizeupto12 mm,laidin floors,and landings,jointed with neatcement slurrymixedwith pigment tomatch theshade of thetiles, including rubbing and polishing complete, on20mm thick bed of cement mortar1:4(1cement:4 coarse sand) : 11.16.1 Lightshadepigment usingwhite cement

11.18 Precast terrazotiles 22mm thick with gradedmarblechips of sizesupto12 mm,in skirtingand risers of stepsnotexceeding 30 cmin height, on 12 mm thick cement plaster 1:3 (1cement:3coarsesand),jointed with neatcement slurrymixedwith pigment to match theshade of the tiles,including rubbing andpolishing complete with tilesof: 11.18.2 Mediumshadespigment using 50% white cementand50% ordinary cement

11.38 Providing andlaying Ceramicglazed floor tiles of size 300x300 mm(thickness tobespecifiedbythemanufacturer), of 1stqualityconforming toIS: 15622,of approved make,inallcolours, shades, except White,Ivory, Grey, Fume Red Brown,laidon 20 mm thick bedofcementmortar1:4 (1Cement :4Coarsesand),jointing with grey cement slurry @ 3.3 kg/sq.mincluding pointing thejoints with white cement andmatching pigments etc.,complet

13.8 Providing andapplying whitecement basedputty of average thickness 1mm, of approvedbrand andmanufacturer, overthe plastered wall surfacetopreparethesurface even ands mooth complete.

13.43 Applying one coat of water thinnable cement primerof approved brand andmanufacture onwall surface : 13.43.1 Water thinnable cement primer

13.44 Finishing walls withwaterproofing cement paint of requiredshade : 13.44.1 New work (Two ormore coats applied @ 3.84kg/10sqm)

13.83 Wall painting with premiumacrylic emulsion paint of interior grade, having VOC(VolatileOrganic Compound ) contentless than50 grams/litre of approved brand andmanufacture,including applying additional coatswherever requiredto achieveeven shadeand colour 13.83.2 Two coats

13.5 Applying priming coat: 13.50.1 Withready mixedpinkor Greyprimer of approved brand and manufacture onwoodwork(hard andsoft wood)

13.51 Painting with silicon &acrylic emulsion based waterthinnablesealer of approved brand andmanufacture onwet orpatchyportion of plasteredsurfaces : 13.51.2 Two coats

4.17 Making plinth protection50mmthick ofcementconcrete1:3:6 (1 cement :3coarse sand(zone-III) derived fromnaturalsources : 6 gradedstoneaggregate 20mm nominal sizederived fromnatural sources)over 75mm thick bedof dry brick ballast 40 mm nominal size, well rammed and consolidated andgrouted with finesand, including necessary excavation, levelling & dressing &finishing the topsmooth.

Approx Drain as per analysis

9.96 Providing andfixing aluminiumsliding door bolts, ISImarked anodised(anodic coating notless thangrade AC 10 as perIS:1868), transparent or dyed to required colour or shade,withnutsand screws etc.complete : 9.96.1 300x16 mm

9.97 Providing andfixing aluminiumtower bolts, ISImarked,anodised(anodic coating not lessthangrade AC10as per IS:1868 ) transparent or dyed to required colour or shade,withnecessaryscrews etc. complete: 9.97.1 300x10 mm

9.100 Providing andfixing aluminium handles, ISImarked, anodised(anodic coating notless thangrade AC10 asper IS:1868)transparent or dyed to requiredcolour orshade, with necessary screws etc. complete: 9.100.1 125 mm

9.102 Providing andfixing aluminium case ment stays, ISImarked,anodised(anodic coating not lessthangrade AC10as per IS:1868) transparent ordyed to required colour and shade, with necessary screws etc. complete.

9.48 Providing andfixing M.S.grills of requiredpattern in frames of windows etc.with M.S.flats,square or round barsetc. including priming coatwith approved steelprimer allcomplete. 9.48.2 Fixed to openings /wooden frames withrawl plugsscrews etc.

9.42 Providing andfixing 18mm thick, 150 mmwide pelmet of flat pressed3layeror gradedwood particle board medium density grade I, IS:3087 marked,including topcover of 6 mmcommercial ply wood conforming to IS: 303 BWR grade,nickelplatedM.S. pipe 20 mmdia (heavy type)curtainrod with nickelplated brackets,including fixing with 25x3mm M.S. flat10 cm long fixed to pelmet with hollockwoodcleats of size 100 mm x40 mm x40 mm onboth innerside of pelmet andrawl plugs 75 mm long etc. allcomplete.

13.52 Finishing with Epoxypaint(twoor more coats)at alllocations prepared and applied as permanufacturer's specifications including appropriatepriming coat, preparation of surface, etc.complete. 13.52.1 On steel work

10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

D.T Bore Well 23.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil 23.1.1.2 350 mm dia

23.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 23.4.3 200 mm nominal size dia

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18.7.5 40 mm nominal dia Pipes

18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.13.1 25 to 40 mm nominal bore

23.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

23.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Supply fitting fixing of single phase 1.5 H.P common make domestic mono block water pump including wiring etc as directed by the Deptt.

Water supply Work and Sanitary Fitting 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.4 32 mm nominal dia Pipes

18.7.1 15mm nominal Dia pipes

18.15 Providing and fixing brass bib cock of approved quality : 18.15.1 15 mm nominal bore

18.16 Providing and fixing brass stop cock of approved quality : 18.16.1 15 mm nominal bore

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.2 32 mm nominal bore.

17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge

17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.19.3 40 mm nominal bore 18.19.3.1 Horizontal

18.19.3.2 Vertical

18.20 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.20.2 20 mm nominal bore

18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.22.2 150 mm diameter

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250 mm

17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter

12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler 12.42.1.2 110 mm

12.42.2 Single pushfit Coupler 12.42.2.2 110 mm

12.42.3 Single tee with door 12.42.3.2 110x110x110 mm

12.42.4 Single tee without door 12.42.4.2 110x110x110 mm

12.42.5 Bend 87.5° 12.42.5.2 110 mm bend

12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.43.2 110 mm

17.6 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.6.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern

17.5 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 17.28.2.1 32 mm dia

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

18.58 Providing and fixing PTMT grating of approved quality and colour. 18.58.2 Rectangular type with openable circular lid 18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating

18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.2 45 cm length 18.21.2.2 20 mm nominal bore

1640 Slotted cowl (terminal guard) 100 mm dia

Electric Work 1.8 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1.8.1 Group A

1.8.2 Group B

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1.21.1 20 mm

1.22 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 1.22.1 75 mm X 75 mm X 60 mm deep

1.22.3 150 mm X 75 mm X 60 mm deep

1.22.7 200 mm X 150 mm X 60 mm deep

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.1 5/6 A switch

1.24.3 15/16 A switch

1.24.4 3 pin 5/6 A socket outlet

1.24.5 6 pin 15/16 A socket outlet

1.24.8 Bell push

1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1.27.1 1 or 2 Module (75mmX75mm)

1.27.3 4 Module (125mmX75mm)

1.27.6 12 Module (200mmX150mm)

1.29 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

1.30 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano typeswitch, connections, painting etc. as required.

1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

1.34 Supplying and fixing brass batten/ angle holder including connection etc. as required.

1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

2.1 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 2.1.3 100 A TP&N

2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 2.2.2 125 A, 16 KA,TPMCCB

2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.3.2 8 way , Double door

2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.4.1 4 way (4 + 12), Double door

2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1 Single pole

2.12 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.12.2 63 A

2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.13.3 100 A

2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

5.10 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

5.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1.1 Upto 35 sq. Mm

MR-1:-Supplying with including fitting fixingof LED Bulb 12 Watt. etc.as directed 26 by the Deptt LED/Home lighting solution

MR-2:-Supplying with including fitting 27 fixing Of LED Tubelight etc. As directed by the Deptt

MR-3:-Supplying with including fitting fixing Of ceiling fan etc. as directed by the Each Deptt

MR.4:-Supplying with including fitting fixing of exhaust fan etc as directed by the deptt.

MR-5_:-Supplying including installation,Commissioning of vermin and dust totally enclosed,Phosphatised powder painted cubical Outdoor type floor mounting compartmentalize panel board of size 0.80M (B) X 0.90M(H) X 0.40M(D) made of 16SWG(1.66mm) thick CR. Sheet and 35mm x 5mm size angle having 4Nos. Legs at the bottom. The panel Board is to be erected in 1:3:6 PCC foundation including brick soling/grounting etc.complete neatly wiring done with provision for one No.250A 4pole MCCB as incomer and outgoing as specified and directed by the deptt. Confirming to IP43 protection comprising of the following electrical items:. I. 30 mm x 5mm 4 strip copper Bus-Bar 0.5 Length each. 2. Poilt Lamp with intergat ckl LED 110-230V (Red, Yellow & Blue)=3Nos. (Incoming & Outgoing Swuitch Gear of reqd.Racting will be measured and paid separately.)

Supplying and fitting fixing 2H.P.Single phase Centrifugal Mono block Pump set sync speed 2900 rmp. Model No.KDS- 213 with DOL Starter Control & switch gear (/BCH/L&T/Siemens/equivalentmake).With all accessories complete as required and as directed by the department.

NARAYAN CH BRAHMA