REPAIRS TO INTERLOCKING PAVER BLOCKS RAISING OF MANHOLES REPAIR REPLACEMENT OF GULLY TRAP REPAIR OF FENCING GATE COMPOUND WALL RCC MS COVERS GRATING AT OLD RS COLABA UNDER AGE BRII NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of cement concrete (unreinforced) in ground floors & paving not exceeding 15 cm thick below & above Ground level complete all as specified & directed by Engineer in charge

Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc.complete all as specified and directed.

M & L plain Cement concrete type C-2, 1:3:6 (using 20mm graded stone aggregate) in sub base , plinth protection, mass concrete , Pavings,hardstanding etc, laid in pannel, finished fair & even including filling the joints with sand mixed with bitumen in 1:1 ratio wherever required complete all as specified. complete all as specified.

M & L plain Cement concrete type B - 2 1:2:4 (using 20mm graded stone aggregate) , plinth protection, mass concrete , Pavings,hardstanding etc, laid in pannel, finished fair & even including filling the joints with sand mixed with bitumen in 1:1 ratio wherever required complete all as specified. complete all as specified.

M & L hardcore of gauge n exc. 63 mm, depo-sited, spread and le-velled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushing complete (Note : Sand cushing shall be measured and paid separetely).

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushing complete (Note : Sand cushing shall be measured and paid separetely).

M&L for Sand filling under floors/paver blocks all complete all as specified.

S & F Precast plain cement concrete prepolished coloured chequerd floor tiles 300 x 300 x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.) Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately).

M & L screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying tiles all as specified.

Demolition of cement concerete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engineer in charge.

S&F MS TMT bars 10 mm dia and above cut to length, bend to shape required including cranking and bending, spirally hooking ends and binding with & including mild steel wire (annealed) not less than 0.90 mm dia all as specified.

M&L for precast RCC slabs 1:2:4 type B1 (using 20mm graded stone aggregates) such as manhole cover and similar articles with plain fair faces, including chamfers, weatherings, throating etc. and setting in in CM 1:4 all as directed

M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick horizontal rough finished surface complete all as specified and directed

MS&F prefabricated cast iron work grade FG 150, unmachined in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors. dampers, stop valve boxes, baluusters and similar works (weight of each articles exceeding 5 kg)

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by Engineer in charge

M&L for precast cement concrete block masonary with solid block of grade (C-5) having block density not less than 1800 Kg/cum, exc. 10cm in width and setting in CM 1:6, complete all as specified and directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

Taking down cement plaster of any description etc. including raking out joints, hacking for key, scrubbing down with water, etc. Including removal of debris out side MD land complete all as specified & directed by Engineer in charge

Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping/kerbs including necessary form work including weathering slightly rounded or chamfered angles and throating as directed complete

M & L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall finished surface etc complete.

M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer & bio wash on walls.

M&L for preparing old plastered surfaces of walls and applying one coats of Acrylic base paint exterior grade (100% Acrylic) including bio washing etc. complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supplying & fixing Framed work such as grills, gratings,etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars;gate barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks , brackets and similar work conforming to Fe 290 Gde E-165

S & F Rolled Mild Steel Framed work as in plates (plain or chequered) for drain/manhole cover square cut or notched forming holes conforming to Fe 290 E 165 complete.

Dismantling of fencing posts fixed in conrete, brick work, masonry etc incl fencing of compound walls all as specified .

M&L MS Angle iron post or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mest etc) including all necessary drilling bolting or riverting etch and similar work confirming to /fe 290 Gde E-165

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple oe steel pins etc as directed by EIC (each line wire to be measured)

Dismantling of fencing wire mesh, any type all as specified and as directed.

Supply only chain link fencing made out of 3.10mm dia and above galvanised iron wire of mesh 75mm x75mm size,made into matters or cages straining and fixing to RCC Posts.

fixing only chainlink fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts,etc. including provision of binding wire (Note :- MS Flat & MS bar to be measured & paid separately)

M & L Preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint ( Ordinary tint) over one coat of red oxide primer.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified and directed.

M&L cleaning the existing surfaces of chequered tiles/paver blocks and applying two coats of floor guard paint over a coat of primer

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

S & F CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

All as per item No 37.00 above but except pipe.

S & F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

All as per item No 39.00 above but except pipe.

S & F CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

S & F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints fixed to walls.

All as per item No 44.00 above but except pipes

S & F PVC (SWR) bends 150mm bore any radius

S & F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls.

All as per item No 47.00 above but except pipes

S & F PVC (SWR) bends 110mm bore any radius

S & F CI Tee 100mm bore with cement joints complete all as specified.

S & F CI Tee 75mm bore with cement joints complete all as specified.

M&L CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead.

S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia

M&L anodised aluminium sheeting 22 gauge thick fixed in repairs as in crumple section.

Systematicaly cleaning and desilting of pipe sewers upto 150mm dia including man holes and gully trap of any size and depth by passing knots , bambboo, kamti and disc of required size , pumping out liquid waste / sewage , plugging diverting the flow in the drain , if necessary and stacking the removed silt / sludge in deposits as directed including taking precautionary measures such as safty belts , dry cells , torch for lighting in side the manholes and drain etc, sprinkling bleaching powder on the silt / sludge removed to avoid bad smell and disposal of silt out side MD land complete all as specified and directed.

All as per item No 55.00 above but dia exc 150mm.

Cleaning existing drainage / culverts/manholes up to 1.50m depth including removing cover slabs , soils , spoils , vegetation , silt etc and refixing cover slabs including making good in cement mortar 1: 6 and removing material outside the MD land exc. 5 Km but n. exc 10 Km complete all as directed and specified.

All as per item No 57.00 above but exc.1.50m and n.exc. 3.00m depth.

M&L for preparation of Black bituminous road surface and applying thermo plastic road marking paint of white/yellow colour strips of width 125mm, minimum 1.5 to 2 mm thick with applicator machine and heated mixer with stirring mechanism at temprature 160 degree C, laid uniformly with width as directed, paint confirming to BS-3362 Part I and II of 1989 etc, complete all as per manufacturer instructions and as directed by Engr-in-Charge. Make:Shivalik/CMS Ltd/Automat Road/Safety Ltd/Hotherm plast Engg.

Removing demolished/excavated materials and debris laid at Navy Nagar outside MD land .

BOB ENTERPRISES

RAJU AND CO

Diamond Construction

Unitech Enterprises