Const.of Anganwadi Centre with toilet at Taksha

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and laying dry stone pitching ( any thickness ) including cost of stone on horizontal level

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) (A) Crushed

Random Rubble masonry with hard stone from nallah in foundation and plinth using nallah stone with mud mortar.

Providing and laying damp-proof course 50 rnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size (A) Crushed

Providing and laying of Sundried brick masonry laid in mud mortar but includinhg cost of brick and including carriage complete job.

Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.

Centnng and shuttering including strutting~ propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers and centilevers.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/ Fir wood

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2

Providing and fixing of 6mm thick teak ply wood for ceiling and wall pannelling and including placing , position and ploshing complete job.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing of 1.5" wooden planks with T&G for wooden flooring using budloo wood thick including placing in position complete job.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 coarse sand)1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt· per sqm hings bright finished of required size with necessary screws. second class Kail wood 30mm. Windows.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge Second kail wood 35mm. Doors.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Carriage of stone from an average lead upto 05 km by M.T vide item no. 4

Carriage of sand and aggregate from an average lead upto 10 km by M.T

Carriage of cement & steel from an average lead upto 150 km by M.T

M/S TSEWANG MOTUP GOVT. CONTRACTOR