85938 COMPREHENSIVE REPAIRS TO OTM ACCN IN THE AREA OF AGE BR-I UNDER GE (SOUTH) PUNE

Amount

B & R PORTION Demolition of cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. (Note :- Cost of demolition of Chequered tiles / paver tiles etc if any at site as directed shall deemed to be included in quoted rate. However, thickness of concrete actually demolished shall only be considered to arrive the volume and paid accordingly. Contractor's claim of whatsoever nature on this account shall not be entertained.)

Dismantling stone slabs of any description or thickness in floors, aprons, paver block tiles etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in levelling course complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) Type D-2 (using 40 mm graded stone aggregate) as in sub base/ flooring complete all as specified and as directed.

M&L for 60 mm thick ISI marked coloured Machine pressed precast concrete interlocking paver block grade M-35 of any shape and size, glossy finish with moulded as in floor / pavement laid over 20 mm thick crushed stone sand cushioning complete all as specified and dircetd. (Note : Crushed stone sand shall be measured and paid seperately)

M&L for 20 mm thick crushed sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

M&L for precast coloured chequered cement concrete tiles, glossy finish of size 305mm x 305mm x 25 mm thick machine pressed set jointed and pointed with grey cement and pigmenrt in floor and cut and polished with and including 20 mm thick screed bed in cement motar 1:4 complete all as specified and directed.

M&L for 18-20 mm thick Ruby red Granite slab (of any type/colour) work (table rubbed and polished) in steps, pillars; window cills/jamb, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radious etc laid with and over & including 20 mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for 18-20 mm thick Granite slab (of any type/colour) work (table rubbed and polished) in steps, pillars; window cills/jamb, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius etc laid with and over & including 20 mm thick screed bed in CM (1:4) complete all as specified and directed.

Labour only for rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L for cutting grooves on stone slabs such as in steps and other similar situations complete all as specified and directed.

M & L for Machine cut cuddapa stone slabs one side polished 30 to 40 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate)as in flooring/ Plinth protection & finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for removing of existing water tank of capacity 500,1000 or 2000 Ltr setting aside (or lowering if required) for repair, cleaning etc and reconnecting & refixing in position after carrying out necessary roof treatment including necessary fittings and GI Pipes if required complete all as specified and directed. (NOTE : Necessary by pass arrangements for water supply is to be done by the contractor till completion of roof work & cost thereof shall deemed to be included in quoted rate.)

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in ratio 1:3 complete all as specified and directed.

M&L for 300mm x 300mm x 7 to 8mm thick, non skid, ceramic, coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for matt finished, coloured ceramic tiles 7 to 8 mm thick 600mm x 600mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring complete all as specified and directed.

M&L for coloured/ double charged/ ultra charged joint free Vitrified Ceramic tiles of size 600 mm x 1200 mm x 8-10 mm thick (square) polished, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for coloured glazed ceramic designer tiles in vertical surface 600mm x 300mm x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and over & including 15 mm thick plaster in CM 1:4 to maintain true plumb including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for but including sunken portion and unreinforced etc including APP membrane complete all as specified and as directed. (NOTE :- Thickness of concrete actually demolished shall be considered to arrive volume. Contractor's claim of whatsoever nature on this account shall not be entertained.)

Material and labour Water proofing treatment to sunken slab, walls, etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar. (c) Sanitary pipes entering through walls and floor shall be sealed with Bath seal Tape and the gaps to be grouted with non-shrink cementitous grout Bath seal Grout” Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating (approved by GE) shall be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.

SER ITEM No. 21.00 CONTD.... (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (PCC 1:5:10 Type E2 shall be measured and paid seperately) (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved make by GE shall be used.

M&L for PCC 1:5:10 type E2 (using 40 mm graded brick aggregate) lean concrete for filling sunken floor etc. complete all as specified and as directed.

M&L for cleaning the roof portion thoroughly remove laitance dirt dust etc. and form angle fillets of size 40 mm x 40 mm along the juction of wall and floor using polymer molymer modified mortar 40 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate), finishing cement concrete surface even and smooth with using extra cement with water proofing compound as per manufacturers' instruction as on roof complete all as specified and directed.

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.70 Kg/Sqm of area complete all as specified. (c) Laying 3mm thick APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.60 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge. (NOTE : Water Proofing treatment shall be carried out by engaging authorised applicator of the manufacturer.)

M&L for old size fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of old brick / stone wall etc. complete all as specified and as directed.

M&L for old size brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 including demolition of existing wall complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. (Note :- WPC shall measured and paid seperately)

Supply only Integral waterproofing compound of approved make complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement after dubbing out average 10 mm thick in cement mortar 1:6 on irregular face of wall / stone masonry wall surfaces complete all as specified and as directed. (Note : WPC shall measured and paid seperately)

M&L for rendering 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement after dubbing out average 10 mm thick in cement mortar 1:6 on irregular face of wall / stone masonry wall surfaces complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work/ concrete surface in cement mortar 1:4 mixed with water proofing compound finished even and smooth with using extra cement at Chhajja / facia and above wall after dubbing out 10 mm thick in cement mortar 1:4 on irrugular surfaces of any type complete all as specified and as directed. (Note : (i) WPC shall measured and paid seperately (ii) Quoted rates shall be deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out upto 12 mtr height of Building.)

M&L for preparation of new plastered surface of wall and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre (shade and colour to be approved by GE) complete, as per manufacturer's instructions with and including two or more coats of wall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M & L for preparation of new plastered surface of any description over 10 cm width or girth and applying two coats of exterior weather paint complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall/floor/ ceilings etc) including taking down of following size :-

(a) 15 mm bore

(b) 20 mm bore

S&F GI tubing "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. including taking down existing steel tubing of the following sizes :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

(d) 40 mm bore

Cutting existing steel tubing and including screwing for alterations or additions for following size :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25/32 mm bore

(d) 40 mm bore

S & F in repairs cast copper gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of following sizes :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F in repairs ball valves suitable for iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed of following sizes complete all as specified and directed :-

(a) 15 mm bore

(b) 20 mm bore

(c) 25/32 mm bore

(d) 40 mm bore

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing and making good to match with existing finishes, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S & F in repair vitreous china wash basin white flat back of size 550 mm x 400 mm including 32mm dia CP waste coupling long screw, chain and plug and PVC waste pipe including CI brackets, etc. complete all as specified and directed.

S & F in repair WHB round bowl type counter top of size 520m x 450 mm including CP waste coupling with waste pipe complete fittings coloured fixed in 18 mm thick polished granite 900mm x 600 mm size complete all as specified and directed. (Note : Granite shall be measured and paid seperately).

S&F in repairs vitreous china squatting pan of size 580mm x 440mm white in integral foot rest with 'P' or 'S' trap (Orissa pattern) long pan including provision of lime concrete bedding complete (excluding flushing cistern and flush pipe) all as specified and directed.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing finish complete all as specified and as directed.

S&F in repairs cascade type (coloured) floor mounted water closet with lowlevel flushing cistern single piece coloured with floor trap , PVC coloured seat cover and connecting pipe etc complete all as specified and directed. (Note : Colour shall be approved by GE in consultation with User's)

S&F in repairs vitreous china ceremic white single piece commode type WC (S or P trap) with UF soft close seat cover, hinges, accessorires set, size 365x655x765 mm complete all as specified and directed.

S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs 15mm bore bib taps, brass chromium plated with wall flange, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and as directed.

S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, fancy type, long neck, cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts complete all as specified and as directed.

S & F in repairs 15 mm stop valves / angular stop cock with wall flange, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

All as per item No. 52.00 above but consealed long shank complete all as specified and as directed.

S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete all as specified and as directed.

S & F in repairs CP health faucet (ABS Body) with 1 mtr long flexible cord complete all as specified and as directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and as directed.

S & F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repairs elbow operated 15mm bore pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever complete all as specified and as directed.

S & F in repairs Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed complete all as specified and as directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without drainage board made of stainless steel 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, CP Brass waste coupling washers and waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, over all size of sink 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm, complete all as specified and directed.

S & F Rotational moulded (ISI Marked) polyethylene water storage tanks tripple layer of capacity 500 Litre (cylindrical vertical with closed top) hoisted and fixed in position including all necessary GI fittings including dismantling of existing unserviceable water tank complete all as specified and directed.

S & F Rotational moulded (ISI Marked) polyethylene water storage tanks tripple layer of capacity 1000 Litre (cylindrical vertical with closed top) hoisted and fixed in position including all necesarry GI fittings including dismantling of existing unserviceable water tank complete all as specified and directed.

S & F Rotational moulded (ISI Marked) polyethylene water storage tanks tripple layer of capacity 2000 Litre (cylindrical vertical with closed top) hoisted and fixed in position including all necesarry GI fittings including dismantling of existing unserviceable water tank complete all as specified and directed.

S & F ball valves 15 mm bore high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F ball valve 20 mm bore high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F ball valves 25mm bore high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

M & L for Cleaning of PVC water tank of capacity upto 500 ltr by using bleaching powder in exsting position and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

M & L for Cleaning of PVC water tank of capacity upto 1000 ltr by using bleaching powder in exsting position and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

S & F in repair flexible waste pipe of 32 mm or 40 mm dia for wash hand basins, sink etc complete all as specified and as directed.

S & F in repairs stainless steel gratings 100 mm dia with hole for waste pipe complete all as specified and as directed.

M & L for 75 mm bore outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair looking mirror of size 1500mm x 600 mm using 4 to 6 mm thick mirror, mounted on 6 mm thick AC built board or commercial ply board and fixed to wooden plug with chromium plated brass screw clips all as specified including teak wood beading decorative type complete all as specified and directed.

S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches including taking down pipe of following size all as specified and directed : (Note: - Quoted rate shall be deemed to be inclsive of necessary scaffolding / security measures as the work to be carried out for elevated up to 12 mtr height Building)

(a) 110 mm bore

(b) 75 mm bore

S&F in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and as directed.

S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 110 mm bore complete all as specified and as directed.

S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 75 mm bore complete all as specified and as directed.

S&F in replacement for PVC (SWR) gully trap 125/100mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in replacement PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 110mm bore PVC (SWR) WC connector with lip ring complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) multi B142floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair 40 mm bore Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm with complete fittings complete all as specified and directed.

S&F in repair plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs PVC syphon with rod for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit ) complete all as specified and as directed.

S&F in repairs flush handle PVC with adjustable Lever and hook for low level flushing cistern complete all as specified and as directed.

S&F in repairs HDPE PVC lid (cover) suitable for 500 ltr to 1000 Ltrs capacity PVC water tanks, complete all as specified and directed.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old mirror complete all as specified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole) complete all as specified and directed.

Taking down shutters of any description not exc 1.0 sqm complete all as specified & as directed.

Taking down shutters of any description not exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as all specified and directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.00 Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as all specified and directed.

Taking down shutters of any description exc 1.0 sqm and not exc 2 sqm complete all as specified & as directed.

Taking down of chowkat with shutter not exc 1.50 sqm each without taking off shutters from the frame including making good the disturbed surface complete all as specified and directed.

Taking down of chowkat with shutter exc 1.50 sqm & not exc 4.0 sqm each without taking off shutters from the frame including making good the disturbed surface complete all as specified and directed.

S&F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Squre tube, suppling & fixing in opening as per SSR Pt-I specification and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles plain colour PVC sheet for top rail , lock rail & bottom rail either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with sutable PVC beading and jointed together with solvent cement, supplying and fixing in the frame at site as per SSR Pt-I specification & drawing complete all as specified and directed.

S & F pressed steel frames of size 105mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including M & L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame complete all as specified and directed.

S & F pressed steel frames of size 125mm X 60mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate including M & L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and Fitted to chowkats complete including both faces of shutter covered with decorative face 0.9 mm thick veneer complete all as specified and as directed.

S&F in repairs towe bolt 150mm long (concelled tower bolt), SS 304 construction (Make to be approved by GE) all as specified and directed.

S&F in repairs door handle SS 304 construction, length 250mm X 22mm dia (Make to be approved by GE) all as specified and directed.

S&F in repairs door lock 100mm / 75mm concealed door lock, SS 304 finish (Make to be approved by GE) all as specified and directed.

S & F Stickerly vinyl self adhesive decorative glass film for glass complete all as specified and directed. (Note : Make and Design of glass film shall be approved by GE)

S&F Brass sliding door bolts, sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 125 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and as directed.

S&F 300 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 150 mm long Extruded brass handles, fabricated type polished complete all as specified and as directed.

S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and Fitted to chowkats complete all as specified and as directed.

S&F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces with lapping / farme to match complete all as specified and as directed.

S&F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces covered with decorative face 0.9 mm thick veneer with lapping all around of the shutter to match complete all as specified and directed.

S&F for 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces covered with decorative face 0.9 mm thick veneer with lapping all around of the shutter to match complete all as specified and as directed.

S&F 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fix 150 mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and as directed.

Supply and fix 150 mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F of 18/19 mm thick Block BOARD, grade I quality exterior grade type with decorative face veneer on both faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete including dismantling of existing boarding all as spd and as directed

S & F in repair 12 mm thick Plywood, grade BWR, type BB, including grade I quality exterior grade type with decorative face veneer on both faces including lapping of edges fixed with screws to timber frame work as in partitions in cub board complete including dismantling of existing boarding complete all as spd and as directed.

S & F 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S & F Magnetic door catches for cupboard/cabinet etc complete all as specified and as directed.

S&F 100mm dia Brass handles, cast type, polished bright cupboard handles fixed with nuts screws and washer complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S & F in repairs aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 100 mm size stainless steel fancy type handles complete all as specified and as directed.

S &F in repairs 25 mm bore stainless steel curtain rod complete all as specified and as directed.

S &F in repairs stainless steel fancy type round shape ball bracket suitable for 25 mm bore curtain rod complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door/ shutters / frames etc. complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.

S&F in repairs, stainless steel plate rack of size 36 inch x 39 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade 304), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. (NOTE : Sample / make of rack shall be got approved by contractor from GE prior procurement.)

S& F in repair chromium plated towel rack with lower hanger, brass raling, including brass screw complete all as specified and directed.

S&F in repairs rubber door seal, 32mm wide with aluminium strip of size 19mm wide fixed with machine made steel screws with washers complete all as specified and directed.

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock, handle, 5mm thick plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following aluminium powder coated sections for shutter and frame confirming to catalogue of 'JINDAL' or of equivalent make complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

M & L for Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, aluminium extruded section body, design No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repairs (incl taking down old window any type) three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as specified and directed (a) SP : 20048 (b) Glazing clips : 19352

S&F in repairs powder coated anodised aluminium fixed partition, comprising of at least 63.50mm x 38.10mm x 1.85 mm aluminium section and including jointing cleats, aluminium snap beading 20x15mm, rubber gasket, glazing clips, 5mm thick froasted glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and all other fittings required to erect as per site requirement and as approved by Engr-in-charge.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F in repair Floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm all as specified and as directed.

Repairing of existing aluminium door single leaf including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified. (Note : Floor door springs where renewed shall be measured and paid separately under appropriate item)

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified. (Note :- Floor door springs where renewed shall be measured and paid separately under appropriate Item)

S&F in repair for 3 mm thick ACP sheet wooden finish along with frame work and making groove and shelf as directed by Engineer-in-charge.

S &F in repair aluminium powder coated partition with 12 mm thick pre-laminated particle board at bottom panel and 5.5 mm thick glass on top panel incl glazing clip and neosprene rubber beading. Partitions manufactured out of aluminium powder coated sections confirming to Catalogue of 'Jindal' or equivalent make for frame 20046, S No-07 of Partition section fixed at distance 1.00 mtr horizontal and vertical and less than 1.0m at the ends for balance space complete all as specified and as directed.

M&L for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Dismantling of wrought or MS work of any description etc complete all as specified and as directed.

M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like including dismantling old existing grill/ grating work or wrought iron work of any description and any position, gates etc complete all as directed by Engineer-in-charge.

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410W - (Gde E- 250) quality A complete all as specified and as directed.

S&F framed work for doors or gate of angle, plain sheet or other sections etc. complete drilled for fixing of steel sheeting, including necessary welding etc of grade Fe-410-W (Gde-E-250 quality B) complete including dismantling structural steel including doors or wrought iron work of any description and any position, gates etc complete all as specified and as directed.

S&F Mild steel, plain, black sheet 1.60 mm thick in Door frame cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed on steel framing with with riveted or welded seams, including bending or turning up, mitred all as specified and directed.

M&L for stainless steel (Grade 304) railing, corner guards made of angles, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts/screws etc. of required size, on junctions of Wall etc, with suitable arrangement complete all as specified & as directed.

S&F 12 mm thick frosted toughened glass fixing in stainless steel stair case railing, partition etc complete all as specified and directed.

M&L for preparing new surfaces of steel over 10cm in width or girth not otherwise described and applying two coats of synthetic enamal (ordinary tint) over a coat of red oxide primer all as specified and as directed.

S&F in repairs 2nd class hard wood of sec area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall panneling work with melamine polish for architect look fixed with screws complete all as specified and as directed.

Supply and Fixing in repair of solid wall lining consisting of 5 mm thick, plain coloured or wood grain printed or as approved by the Engr-in-Charge / prelam PVC sheet used inclusive of solvent as per manufacturer's instruction including dismatling of existing boarding complete all as specified and as directed.

Supply and Fix in repair 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing as in grid / frame on wall for wall lining/paneling as per manufacturer's instruction and as directed by the Engineer-in-Charge.

S&F pluging to cement concrete or stone walls, complete for wooden / PVC sheet fillets, grounds, mouldings, boarding etc at distance not exc. 1.0 mtr complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 8 to 9mm thick in size, of approved brand/make, laid over and including grid work of size 595mm x 595mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2 mm dia G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light including dismantling of old panelling complete all as directed by Engr-in-Charge.

M & L for Providing and fixing Gypsum Ceiling Board 12 mm thick (rectangular/oval/round) including nitches for fans / lights and design as approved by EIC and fixed with screw (as per manufacturers instructions) with and including Gl frame work of 605mm x 605mm grid for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer's instruction with and including 1 to 2mm thick POP finish over gypsum surface and applying two coats of oil bound distemper on ceiling including dismantling of existing false ceiling with grid complete all as specified and directed. (NOTE : Vertical and Horizontal surface etc shall be measured as flat for the purpose of payment.)

M & L for decorative POP cornices/moulding of pattern (as approved by Engr-in-charge) of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

M&L for preparation of new un -decorated surfaces of ceiling incl, cornice and applying two of distemper oil emulsion over alkali resistant priming paint on ceiling all as specified and directed.

M&L for Preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying one coat of distemper oil emulsion all as specified and directed.

M&L for Complete removal of existing treatment and M&L for applying 3 mm thick wall care putty and applying two coats of distemper oil emulsion on walls all as specified and directed.

M&L for Preparation of old decorated plaster surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for Preparation of old decorated surfaces of walls and applying one coat of cement base paint white or tinted complete all as specified and as directed.

M&L for Preparation of old painted wooden surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for applying one coat of varnishing to old wooden surfces of any description and in any position over 10 cm in width or girth complete all as specified and as directed.

M & L for Preparation of old decorated surfaces by brooming down and scrapping wherever necessary and applying one coat of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns complete all as specified and directed. (Note :- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.)

M&L for Complete removal of existing treatment and applying two coats of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns over and including priming coat of exterior primer complete all as specified and directed. (Note :- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.)

M&L for Preparation of old painted surfaces of stone, concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed.

M & L for taking out Plants / vegetation, digging out roots, filling cracks/holes with CM 1:2 and levelling off surfaces to match the existing surface on walls, chajjas etc all as specified & directed by Engr-in-Charge. (Note: - Quoted rates shall be deemed to be inclusive of necessary scaffolding / security measures as the work to be carried out for elevated up to 15 mtr height Building .)

S&F in repairs IInd class hard wood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section and M&L for plain fillets of IInd class hard wood exc 13 but n exc 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.

S&F 0.80mm thick PGI mild steel sheets with zinc coating @ 120 gm/sqm inclusive of both side as in ridge, hips, valley, gutters and straight flashings complete including dismantling old sheet any type all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete including dismantling old sheet any type all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering / ridges, fixed with self tapping screws complete including dismantling old sheet any type all as specified and directed.

M&L for filleting in any position and to any shape in CM 1:3 sectional area exc 25 sqcm but n exc 50 sqcm complete all as specified and directed.

S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or crank hook bolt in roof, wall etc. including dismantling of old sheet of any type complete all as specified and directed.

M & L for Providing cement concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge, concreting on walls under roof sheets etc using waste of formwork complete all as specified and as directed.

Removing building debries materials etc. to a distance of exc 5 Km or under, including loading, unloading out of Defence land complete all as specified and as directed. (NOTE : One metric tonne shall mean "One load". Further the constants given in Note (b) 1 to 16 on page No. 494 in section 21 of SSR Part-II shall be considered to arrive the weight one load)

S&F for ready made pully operated clothes drying system including of four aluminium pipe upto 2.70 RM long each (4 pipe set), outer dia 22 mm and inner dia 19.8mm channel assembly, locking system rope and all fixing materials complete all as specified and as directed. (NOTE : Sample of clothes drying system shall be got approved by contractor from GE prior procurement.)

S&F for 0.78 m long, made of 20 mm square MS pipe, powder coated with provision for fixing 4 pipes with 4 holes for mounting Provided with mounting nails etc complete all as specified and as direceted.

S & F in repairs vitreous china half Stall type white including waste coupling grating longe screw and union for discharge pipe complete including providing & fixing, plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around, urinal back in cement etc complete all as specified and as directed.

E&M PORTION Taking down carefully aluminium / copper point wiring with surface/ concealed PVC conduit or wooden batten (light, fan, socket, bell or power) including sunk in cast iron / pressed steel terminal boxes except fitting such as switches, ceiling roses, lamp holders, sockets, regulators, call bells, light fittings of any sketch etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engr-in-Charge.

M & L for Point wiring with PVC insulated FRLSH 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including concealed rigid non mettalic PVC conduit medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel FLUSH BOX , concealed in wall and making & maching the existing surface with laminated modular cover plate with frame for fixing modular switch, socket regulator etc, concealed in wall and 1.5 sqmm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly complete all as specified and directed for the following :-

(a) One light point/fan point /Exhaust fan point controlled by one switch

(b) One socket outlet 5 Amps controlled by one switch on the same board.

(c) One socket outlet 5 Amps controlled by one switch on independent board.

(d) One bell / buzzer controlled by one bell push.

All as per Ser. item No. 198.00 above but with 2.5 Sq mm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI FLUSH BOX / PVC surface boxes with earth dolly duly as per site requirment, covered with modular white cover plate with frame suitable for modular switches including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point/fan point /Exhaust Fan point controlled by one switch

(b) One socket outlet 5 Amps controlled by one switch on the same board.

(c) One socket outlet 5 Amps controlled by one switch on independent board.

(d) One bell / buzzer controlled by one bell push.

All as per Ser. item No. 200.00 above but with 2.5 Sqmm multi stranded copper conductor cable for one 15 Amps socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated multi stranded copper conductor cable as continuous earth wire complete all as specified and directed by Engr-in-Charge.

S & F in replacement Modular switch1 way 6A, 240 Volts 1 module complete all as specified and as directed.

S & F in replacement Modular switch 1 way 16A, 240 Volts 1 module complete all as specified and as directed.

S & F in replacement of Modular Bell push 6A 1 module complete all as specified and as directed.

S & F in replacement Modular Socket, 6A - 5 pin combined 2 module complete all as specified and as directed.

S & F in replacement Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F in replacement Modular Fan step regulator 120W, 240 Volts 1 module complete all as specified and as directed.

S&F in replacement of ceiling rose surface bakelight two to three terminal complete all as specified and as directed.

S&F in replacement of Lamp Holder, insulated body, with back plate for batten fitting include 1 X 9 watt LED bulb five star rating complete all as specified and as directed.

S & F repair of switch piano flush type pole one way 6 Amps, 240 V including old unsv taking down complete all as specified and as directed.

S & F in replacement of Socket outlet 5 pin 6 Amps, 240 V flush type including old unsv taking down complete all as specified and as directed.

S & F repair of switch piano flush type pole one way 16Amps, 240 V including taking down old unserviceable complete all as specified and as directed.

S & F in replacement of universal socket outlet 5 pin 6 /16Amps, 240 V flush type including taking down Old unserviceable complete all as specified and as directed.

S & F in replacement and replacement of Bell push, flush type, 5 Amps incluing taking down complete all as specified and as directed.

S & F in replacement switch socket combination outlet flush type multi purpose with/without gang box 2 in 1, 3 pin 6/16 Amp, 230 Volts including taking down Old unserviceable complete all as specified and as directed.

S & F in replacement switch socket combination outlet flush type multi purpose with/without gang box 2 in 1, 5amp, 230 Volts including taking down old unserviceable complete all as specified and as directed.

S & F in replacement and replacement of Ding Dong Bell AC, 240 Volts single pole including old unserviceable taking down complete all as specified and as directed.

M & L in replacement of Electronic step type Fan Regulator/Mini switch type dimmer 120/280 Watt capacity including connecting up complete all as specified and as directed.

M & L in replacement of for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size with 4 Sqmm nominal cross sectional area,1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note :- One meter of PVC casing caping along with 2x4 sq mm wire and one 4 sq mm earth shall be measured as one unit length)

M & L in replacement of for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size with 6 Sqmm nominal cross sectional area,1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable and including ISI marked PVC casing caping including fitting in wall etc and connected to common earth dolly making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. (Note : - One meter of PVC casing caping along with 2x6 sqmm wire and one 6 sqmm earth shall be measured as one unit length)

S&F in replacement, IP-43, MCB DB TPN 4 way, double door, with busbar 415 V and concealed / fixed on wall/board as required including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed.

Supply and fix in repair and replacement of sheet metal enclosures for SPN DB's 240 volts, factory made double door flush type, IP-42 protection and all as per IS-8623, made from sheet metal 8 way 100 amps rated bus bar to be fixed with wall all accessories complete including taking down unserviceable fitting complete all as specified and as directed by Engr-in-Charge.

All as per Ser. item No- 222.00 above but 12 way DB complete all as specified and as directed.

All as per Ser. item No- 222.00 above but 4 way DB complete all as specified and as directed.

S & F in replacement and replacement of Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20 Amps 240 volts complete including taking down unserviceable fitting complete all as specified and as directed.

S&F in replacementof MCB Single pole and neutral rated capacity 40 to 63A, 240 V breaking capacity 9KA C series complete all as specified and as directed.

S&F in replacement of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 9KA C series complete all as specified and as directed.

S&F in replacement MCB TPN/TP 40 /63 Amps, 10KA, 415 V, 'C' series complete all as specified and as directed.

S&F in replacement MCCB 4 pole 100 Amp, Icu = 16 KA, 415 volts, 50 Hz, type with thermal magnetic release duly connected with copper spreader links 04 Nos and proper size of lugs, nuts bolts and washers for proper connections complete including MS enclosure of suitable size complete all as specified and directed.

S & F in replacement recess mounting LED down light fitting 8 Watt natural white/worm white rounded / rectengular complete as per existing size and type repairs/making good the pop/gypsum ceiling with good finish as existing with suitable fixing arrangement connection complete all as specified and directed.

S & F in replacement recess mounting LED down light fitting 12 Watt natural white/worm whitenrounded / rectengular complete as per existing size and type repairs/making good the pop/gypsum ceiling with good finish as existing with suitable fixing arrangement connection complete all as specified and directed.

S & F in replacement recess mounting LED down light fitting 18 Wat natural white/worm white rounded / rectengular complete as per existing size and type repairs/making good the pop/gypsum ceiling with good finish as existing with suitable fixing arrangement connection complete all as specified and directed.

S & F in replacement recess mounting LED down light fitting 24 Watt natural white/worm white rounded / rectengular complete as per existing size and type repairs/making good the pop/gypsum ceiling with good finish as existing with suitable fixing arrangement connection complete all as specified and directed.

S & F in replacement LED flood lights fitting 20 watts natural/worm white/RGB/GR highly efficient with integral type made of pressure die cast aluminium housing with toughened glass and IP66 protection complete all as specified and as directed.

S & F in replacement LED flood lights fitting 50 watts natural/worm white/RGB/GR highly efficient with integral type made of pressure die cast aluminium housing with toughened glass and IP66 protection complete all as specified and as directed.

S & F in repair LED pannel Recess mounted -2'x2' - 36W watts light fitting natural white/ worm white complete slim/ box typewith heat exchanger unit complete including cutting hole of required size in POP/false ceiling or surface making good disturbed / surface mounted including taking down any type ceiling fitting complete all as specified and directed.

All as per Item No. 236.00 above but size 1'X1' and capacity 18 watt complete all as specified and directed.

S & F in replacement LED pannel Recess mounted -4'X1" - 45 watts light fitting natural white/ worm white complete slim /box type with heat exchanger unit complete including cutting hole of required size in POP/false ceiling or surface making good disturbed / surface mounted including taking down any type ceiling fitting complete all as specified and directed.

S & F in replacement LED strip light 6 W 12 V natural white /worm light with driver complete all as specified and directed.

S & F in replacement surface mounted rounded panel light 18 Watt natural white /worm light with driver complete all as specified and directed.

Supply and fix in replacement LED tube light fitting natural white/ warm white complete with all fitting and fixing accessories, 1X20Watt pre-wired with high efficiency electronic driver, PVC body glare free, smooth light distribution complete including taking down any type fitting all as specified and as directed by Engr-in-Charge.

Supply & fix in replacement Led tube light fitting 20 Watts with aluminium extrusion housing including taking down any type fitting complete all as specified and as directed.

Supply & fix in replacement Batten type Led tube fitting 10 W including taking down old unserviceable complete all as specified and as directed.

S&F in replacement of PVC modular gang box of following size Plain /Vertical/ Horizontal including PVC modular frame fixing modular /flush switch socket regulator complete all as specified and directed.

PVC modular gang box 3M

PVC modular gang box 6M

PVC modular gang box 8M

PVC modular gang box 12 M

PVC modular gang box 16 M

PVC modular gang box 18M

S&F in replacement of heavy duty PVC casing caping strip of following sizes including accessories elbow tee, feeting screw etc complete all as specified and directed :-

S&F in replacement of 1100 Volts grade heavy duty service line cable PVC insulated aluminium conductor, twin core cable, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or cicrular of aluminium conductors size 10 Sqmm stranded conductor including taking down old unserviceable complete all as specified and directed.

All as per item No- 246.00 above but size 6 sqmm complete all as specified and as directed.

All as per item No- 246.00 above but size 4 sqmm complete all as specified and as directed.

M & L in replacement of for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. (Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.)

REKHA ELECTRICALS (BID ID -3381195)

Mourya Construction (BID ID -3384863)

M/S Sharvi Construction (BID ID -3384842)

PRASHANT CONSTRUCTION (BID ID -3384447)

L.K.R.TIWARI CONSTRUCTION (BID ID -3385234)

M/s.BAJRANG CONSTRUCTION (BID ID -3384286)

Vijay Construction and Company (BID ID -3383290)

Shree Ayyappa Engineering (BID ID -3392771)