PROVN OF STANDBY MOTORS AND PUMPS UNDER GE 864 EWS AND JOB NO W/AMWP-01/BB CANTT/ 2024-25

Amount

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, horizantal multistaging, Discharge 300 LPM at 120 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 20 HP, RPM 1400 - 1550, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismantling the exisiting pump set with base plate and refixing the delivery pipe alongwith new pump set complete all as specified and as directed by Engr-in-Charge. Make - Kirloskar (Pump Model-RKB40L/12L, 6 STAGES, MOC-CI260/(012)/CI260/(012)/SS 410 ANLD (253) with Motor 15KW/2P/415V/TEFC/IE2) or equivalent in KSB/Willo Mather/Crompton

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, horizontal multistaging, Discharge 300 LPM @ 100 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 40 HP, RPM 1400 - 1550, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismandling the exisiting pump set with base plate and refixing the delivery pipe along with new pump set complete all as specified and as directed by Engr-in-Charge. Make - Kirloskar (Model-RKB40L/12L, 6 STAGES, MOC-CI260/(012)/CI260/(012)/SS 410 ANLD (253) with Motor 30KW/2P/415V/TEFC/IE2) or equivalent in KSB/Willo Mather/Crompton

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, horizantl multistaging, Discharge 300 LPM at 176 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 40 HP, RPM 1400 - 1550, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismandling the exisiting pump set with base plate and refixing the delivery pipe along with new pump set complete all as specified and as directed by Engr-in-Charge. Make - Kirloskar (Model-RKB40/12L, 8 STAGES, MOC-CI260/(012)/CI260/(012)/SS 45C8 HOT RLD (056) with Motor 30KW/2P/415V/TEFC/IE2)or equivalent in KSB/Willo Mather/Crompton

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, horizontal multistaging, Discharge 300 LPM @ 100 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 12.50 HP, RPM 1400 - 1554, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismandling the exisiting pump set with base plate and refixing the delivery pipe along with new pump set complete all as specified and as directed by Engr-in-Charge. Make - Kirloskar (Model-RKB40L/12L, 6 STAGES, MOC-CI260(012)/CI260/(012)/SS 410 ANLD (253) with Motor 9.3KW/2P/415V/TEFC/IE2) or equivalent in KSB/Willo Mather/Crompton

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, horizontal multistaging, Discharge 180 LPM @ 100 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 20 HP, RPM 1400 - 1550, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismandling the exisiting pump set with base plate and refixing the same along with new pump set complete all as specified and as directed. Make - Kirloskar (Pump model - RKB32/14H, 5 stages MOC-CI260(012)/CI260(012)/SS410 ANLD (253) with Motor 15KW/2P/415V/TEFC/IE2) or equivalent in KSB/Willo Mather/Crompton

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, vertical multistaging, Discharge 180 LPM @ 120 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 20 HP, RPM 1400 - 1550, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismandling the exisiting pump set with base plate and refixing the same along with new pump set complete all as specified and as directed by Engr-in-Charge. Make - Kirloskar (Pump model - RKBV40/14H, 4 stages MOC-CI260(012)/CI260(012)/CS 40C8 (587) with Motor 15KW/2P/415V/TEFC/IE2) or equivalent in KSB/Willo Mather/Crompton

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, horizontal multistaging, Discharge 180 LPM @ 100 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 30 HP, RPM 1400 - 1550, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismandling the exisiting pump set with base plate and refixing the same along with new pump set complete all as specified and as directed. Make - Kirloskar (Pump model - RKB32/14H, 5 stages MOC-CI260(012)/CI260(012)/SS410 ANLD (253) with Motor 22KW/2P/415V/TEFC/IE2) or equivalent in KSB/Willo Mather/Crompton

Supply, install, testing and commissioning of electrically driven pump set, CI casing, with bronze impeller, vertical multistaging, Discharge 180 LPM @ 183 Mtr head, Squirrel cage air cooled induction motor AC 415 Volts, 3 Phase 50 Hz of 20 HP, RPM 1400 - 1550, mounted on common base plate with necessary PCC foundation as per manufactures design, bolts and nuts including connection with existing delivery pipe including dismandling the exisiting pump set with base plate and refixing the same along with new pump set complete all as specified and as directed. Make - Kirloskar (Pump model - RKBV40/14H, 6 stages MOC-CI260(12)/CI260(12)/CS 45C8 HOT RLD (056) with Motor 15KW/2P/415V/TEFC/IE2) or equivalent in KSB/Willo Mather/Crompton

Supply and laying MS ERW black pipes of Medium grade (B Class) of inner dia 50mm including specials, asper IS 1239 Part-I (2004) and including cutting work, welding work as per site requirement complete all as specified and directed. Make :JINDAL PIPES/TATA/BST/PRAKASH SURYA

Supply and laying MS ERW black pipes of Medium grade (B Class) of inner dia 100mm including specials, asper IS 1239 Part-I (2004) and including cutting work, welding work as per site requirement complete all as specified and directed. Make :JINDAL PIPES/TATA/BST/PRAKASH SURYA

Supply and laying GI water tubing 50 mm bore with screwed socket joints, medium grade galvanised including all fittings, such as sockets, bends, elbows, unions, tees etc (specials) laid in trenches/floor complete all as directed. Make :JINDAL PIPES/TATA/BST/PRAKASH SURYA

Supply and laying GI water tubing 100 mm bore with screwed socket joints, medium grade galvanised including all fittings, such as sockets, bends, elbows, unions, tees etc (specials) laid in trenches/floor complete all as directed. Make :JINDAL PIPES/TATA/BST/PRAKASH SURYA

M & L CI non return valve 50mm without by pass arrangement confirming to IS-5312 part-I, PN 1.6 including nuts, bolts, washers and gaskets complete all as specified and as directed.

M &L CI Foot Valve of size 100mm dia single disc conforming to IS 4038, including nuts, bolts, washers and gaskets complete all as specified and as directed.

M &L CI Foot Valve of size 50mm dia single disc conforming to IS 4038, including nuts, bolts, washers and gaskets complete all as specified and as directed.

M & L CI flanged ''T'' type strainers with SS mesh of size 50MM dia, PN 1.6 including nuts, bolts, washers and gaskets complete all as specified. Make : Kartar/Kirloskar/Leader

M & L Gun metal gate valve 50mm dia, ISI embossed, conforming to IS 778, connected with iron wheel head, screwed at both ends for iron pipes complete all as specified and directed.

M & L CI non raising spindle type sluice valve 50mm dia, both ends flanged with CI body, ISI marked, IS 14846, pressure PN 1.6 with SS spindle with clamps and check nuts, operating hand wheel complete all as specified and directed.

M & L CI non raising spindle type sluice valve 100mm dia, both ends flanged with CI body, ISI marked, IS 14846, pressure PN 1.6 with SS spindle with clamps and check nuts, operating hand wheel complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate 600x600x6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connect to galvanised iron strip 25x4 mm as earthing lead by means of bolts, nuts and washers of GI or steel including excavation and earth work, GI pipe medium grade 32 mm bore for protection of GI earth strip, GI pipe medium grade 20mm bore for watering, charcoal dust, common salt, PCC 1:2:4 type B1 chamber with CI PCC cover GI funnel and wire mesh all as shown in elect plate No.3 of SSR Part-I (2007) including connection and testing complete all as directed by Engr-in-Charge. Note:- Excavation & earth work deemed shall be deemed to be included in the quoted rate.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. size 25x4mm galvanised iron strip all as specified.

S&F MCCB 63 Amps to 100 Amps, 4 pole, 415 Volts with rapturing capacity 50 KA with Microprocessor settings complete all as specified and directed.

Supply and fixing PVC insulated, round sheathed, electric cable with copper conductor, 1100 volts grade cross sectional area 25 sqmm, single core including copper lugs complete all as specified and directed.

Supply and fixing PVC insulated, round sheathed, electric cable with copper conductor, 1100 volts grade cross sectional area 16 sqmm, single core including copper lugs complete all as specified and directed.

Supply Installation, Testing and Commissioning of CPRI approved LT panel cubical type of suitable size, 415 Volt, factory made dust proof made out of CRCA sheet 3.15 mm thickness minimum exept inner sheath OG 2 mm powder coated, machine pressed, with provision of rubber beading and locking system, including copper bus bar of suitable capacity, 4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers each MCCB/cubical switch shall have be independent opening, panel should be monthed on angle iron frame and legs (vertical height of legs not less than 30 cm exept in PCC) made from angle of size 50x50x6 mm, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer legs grouted in PCC 1:2:4, type B-2 (using 20 mm graded stone aggregate) complete including all connection/ control wiring with suitable size of copper conductor cable, including danger notice sticker, comprising the following accessory including testing complete all as specified :-

(a) MCCB 4 pole, 100 Amps, 50 KA-01 No (Incommer) with spreader terminals. Make - Cat No- DZ1F01100NXD1A of L&T, Cat No- IHLFH40100 of Havells and Cat No- LV510487 of Siemens. (b) MCCB 3 pole, 63 Amps -02 (Outgoing) with spreader terminals. Make - Cat No- CM98944OOK0 of L&T, Cat No- IHDA6VBT0063 of Havells and Cat No- LV510475 of Siemens. (c) Single phase preventor-01 No, (d) RYB indication light- 01set, (e) Digital Ammeter 0-300A- 02 No, (f) Digital Voltmeter 0-500V-01 No (g) MCB SPN 6-32 Amp - 01 No (h) FASD starter for 20 HP Heavy duty with relay 45-75 Amp - 02 Nos. Make- Cat No - SS90730DJ of L&T, Cat No - IHHASDUBT of Havells or equvalent to Siemens. (j) Fully automatic phase sequence corrector to correct input reverse phase and also protect against single phasing voltage unbalancing, low high voltage with time delay 4 to 7 second, over load protection and automatic digital timer switch with automatically on/off the motor starter upto 50HP as per time setting-02 No. (k) Complete internal wiring with suitable size FRHR copper conductor and cable lugs & glands complete. (l) Masonry and concrete work for grouting of legs in foundation for mounting of panel -01 Job (m) Cable glands of suitable sizes for cable entry and exit.

Supply Installation, Testing and Commissioning of CPRI approved LT panel cubical type of suitable size, 415 Volt, factory made dust proof made out of CRCA sheet 3.15 mm thickness minimum exept inner sheath OG 2 mm powder coated, machine pressed, with provision of rubber beading and locking system, including copper bus bar of suitable capacity, 4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers each MCCB/cubical switch shall have be independent opening, panel should be monthed on angle iron frame and legs (vertical height of legs not less than 30 cm exept in PCC) made from angle of size 50x50x6 mm, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer legs grouted in PCC 1:2:4, type B-2 (using 20 mm graded stone aggregate) complete including all connection/ control wiring with suitable size of copper conductor cable, including danger notice sticker, comprising the following accessory including testing complete all as specified :-

(a) MCCB 4 pole, 100 Amps, 50 KA-01 No (Incommer) with spreader terminals. Make - Cat No- DZ1F01100NXD1A of L&T, Cat No- IHLFH40100 of Havells, and Cat No- LV510487 of Siemens. (b) MCCB 3 pole, 63 Amps -02 (Outgoing) with spreader terminals. Make - Cat No- CM98944OOK0 of L&T, Cat No- IHDA6VBT0063 of Havells and Cat No- LV510475 of Siemens. (c) Single phase preventor-01 No, (d) RYB indication light- 01set, (e) Digital Ammeter 0-300A- 02 No, (f) Digital Voltmeter 0-500V-01 No (g) MCB SPN 6-32 Amp - 01 No (h) FASD starter for 30 HP Heavy duty with relay 45-75 Amp - 02 Nos. Make- Cat No - SS90730DJ of L&T, Cat No - IHHASDWBT of Havells or equvalent to Siemens. (j) Fully automatic phase sequence corrector to correct input reverse phase and also protect against single phasing voltage unbalancing, low high voltage with time delay 4 to 7 second, over load protection and automatic digital timer switch with automatically on/off the motor starter upto 50HP as per time setting-02 No. (k) Complete internal wiring with suitable size FRHR copper conductor and cable lugs & glands complete. (l) Masonry and concrete work for grouting of legs in foundation for mounting of panel -01 Job (m) Cable glands of suitable sizes for cable entry and exit.

Supply Installation, Testing and Commissioning of CPRI approved LT panel cubical type of suitable size, 415 Volt, factory made dust proof made out of CRCA sheet 3.15 mm thickness minimum exept inner sheath OG 2 mm powder coated, machine pressed, with provision of rubber beading and locking system, including copper bus bar of suitable capacity, 4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers each MCCB/cubical switch shall have be independent opening, panel should be monthed on angle iron frame and legs (vertical height of legs not less than 30 cm exept in PCC) made from angle of size 50x50x6 mm, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer legs grouted in PCC 1:2:4, type B-2 (using 20 mm graded stone aggregate) complete including all connection/ control wiring with suitable size of copper conductor cable, including danger notice sticker, comprising the following accessory including testing complete all as specified :-

(a) MCCB 4 pole, 100 Amps, 50 KA-01 No (Incommer) with spreader terminals. Make - Cat No- DZ1F01100NXD1A of L&T, Cat No- IHLFH40100 of Havells and Cat No- LV510487 of Siemens. (b) MCCB 3 pole, 63 Amps -02 (Outgoing) with spreader terminals. Make - Cat No- CM98944OOK0 of L&T, Cat No- IHDA6VBT0063 of Havells and Cat No- LV510475 of Siemens. (c) Single phase preventor-01 No, (d) RYB indication light- 01set, (e) Digital Ammeter 0-300A- 02 No, (f) Digital Voltmeter 0-500V-01 No (g) MCB SPN 6-32 Amp - 01 No (h) FASD starter for 40 HP Heavy duty with relay 45-75 Amp - 02 Nos. Make- Cat No - SS90730DJ of L&T, Cat No - IHHASDYCT of Havells and equvalent to Siemens. (j) Fully automatic phase sequence corrector to correct input reverse phase and also protect against single phasing voltage unbalancing, low high voltage with time delay 4 to 7 second, over load protection and automatic digital timer switch with automatically on/off the motor starter upto 50HP as per time setting-02 No. (k) Complete internal wiring with suitable size FRHR copper conductor and cable lugs & glands complete. (l) Masonry and concrete work for grouting of legs in foundation for mounting of panel -01 Job (m) Cable glands of suitable sizes for cable entry and exit.

Supply Installation, Testing and Commissioning of CPRI approved LT panel cubical type of suitable size, 415 Volt, factory made dust proof made out of CRCA sheet 3.15 mm thickness minimum exept inner sheath OG 2 mm powder coated, machine pressed, with provision of rubber beading and locking system, including copper bus bar of suitable capacity, 4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers each MCCB/cubical switch shall have be independent opening, panel should be monthed on angle iron frame and legs (vertical height of legs not less than 30 cm exept in PCC) made from angle of size 50x50x6 mm, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer legs grouted in PCC 1:2:4, type B-2 (using 20 mm graded stone aggregate) complete including all connection/ control wiring with suitable size of copper conductor cable, including danger notice sticker, comprising the following accessory including testing complete all as specified :-

(a) MCCB 4 pole, 160 Amps, 50 KA -01 No (Incommer)with spreader terminals. Make - Cat No- DZ1F01160NXD1A of L&T, Cat No- IHLFH40160 of Havells and Cat No- LV516468 of Siemens. (b) MCCB 3 pole, 100 Amps -02 (Outgoing) with spreader terminals. Make - Cat No- CM98944OOK0 of L&T, Cat No-IHDA6VBT0100 of Havells and Cat No- LV510477 of Siemens. (c) Single phase preventor-01 No, (d) RYB indication light- 01 Set, (e) Digital Ammeter 0-300A- 02 No, (f) Digital Voltmeter 0-500V-01 No (g) MCB SPN 6-32 Amp - 01 No (h) FASD starter for 50 HP Heavy duty with relay 66-110 Amp - 2 Nos. Make- Cat No - SS90730DK of L&T, Cat No - IHHASDYCT of Havells or equvalent to Siemens. (j) Fully automatic phase sequence corrector to correct input reverse phase and also protect against single phasing voltage unbalancing, low high voltage with time delay 4 to 7 second, over load protection and automatic digital timer switch with automatically on/off the motor starter upto 50HP as per time setting-02 No. (k) Complete internal wiring with suitable size FRHR copper conductor and cable lugs & glands complete. (l) Masonry and concrete work for grouting of legs in foundation for mounting of panel -01 Job (m) Cable glands of suitable sizes for cable entry and exit.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 31/2 core including required aluminium lugs complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 31/2 core including required aluminium lugs complete all as specified and directed.

Material and labour for preparation of new steel surface and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L for construction of shed of size 5m x 4m x 2.5m for motor starter, panel and stabilizer including steps, plinth protection, cable duct complete all as specified and directed. Refer details as per drawing No CESZ/TD-1110/2011 sheet 1/2 and 2/2 dated 01/12/2011.

M & L for construction of shed of size 3.5m x 3.5m x 2.5m for motor starter, panel and stabilizer including steps, plinth protection, cable duct complete all as specified and directed. Refer details as per drawing No CESZ/TD-1110/2011 sheet 1/2 and 2/2 dated 01/12/2011.

S&F manually operated oil immersed star delta motor starter, three phase with heavy duty, double contact strip wound overload coil and cable entry box complete all as specified and directed for the 50 HP capacity of motors :- Make SKN Type - SSD - S. Dx or equivalent make in BCH/MDS.

-Ditto- all as per item No 34 but for 30 HP capacity motor.

M & L for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked on surface etc., with new sunk type pressed steel terminal boxes suitable for switches duly painted with two coats of red oxide zinc chrome primer with suitable hylam sheet cover of suitable size for mounting of switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for One light / fan point controlled by one, one way switch 5 amps, single pole.

S & F switch piano, single pole one way, flush type, 5 Amps 230 volts for light, fan and tube light complete all as specified and as directed.

S & F Lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed.

S & F Ceiling rose of surface Bakelite 65 X 50 mm, three terminals, AC 50 HZ, 230 Volts complete all as specified and as directed.

S & F wall mounted indus plus LED batten with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 2 x 22w, 230 volts, bipin holders, DIFFUSED TYPE connector block internally prewired etc with necessary mounting arrangements including all accessories with new 3 core multi stranded copper conductor of size 23/0.193 from ceiling rose to fitting and including LED Tube 20W including taking down existing unserviceable tube light fitting complete all as specified and as directed. Make : Havells cat No-STREAKNEOT8UPTO2X22WSSBSWH incl Tube Rod cat No-PHOTONULTRAE2.01213T8SSTL20WLED865SPC, Wipro, Philips.

S & F LED security light luminaire fitting of 45 watts with deep drawn housing including bracket required size and lingth with all accessories complete all as sepcified and as directed. Make - Havells Cat No - ENDURASUNDOWNSL45WLED765PASYBOPC, Wipro, Philips.

M/S ZENITH TRADE LINK (BID ID -3184077)

M/S Charan Singh and Sons (BID ID -3184202)