CERTAIN REPAIRS TO WOODEN FURNITURE SOFA SETS COMPUTER TABLE REWEAVING OF CHARPOYS CANING OF FURNITURE AND POLISHING TO WOODEN FURNITURE REPAIRS UNDER GE NW KARANJA

Amount

Removing of existing worn out cane and supply and recanning Pattern with new plastic cane 2mm wide half round for weaving and 4 mm wide half round for border of cream colour to all types of chairs as per Godrej Pattern, stool dressing couches, bin soiled linen etc, complete all as shown on drawing and as specified and directed. Cane shall be make as approved by GE

Removing unserviceable nylon tape newar from charpoy GI pipe and tightening the loose steel frame and supply and reweaving with new nylon newar of white coloured (not made out of recycled nylon) and of width 50mm, weight not less than 1.50Kg per charpoy and 14 long and 34 short bends and weaving of nylon on both sides of charpoy all as specified and shown on drawing. The cut ends of nylon newar shall be stitched properly and tied instead of screwing as per drawings. Make of nylon newar shall be of make as approved by GE.

Removing of old unserviceable cushion foam of 5 Seater Sofa set and supply only new cushion of 32 Density cushion 100 mm thick for single seat and back with high quality tapestry cloth rate not less 160/- per mtr made with cover on Kora cloth duly Zip (openable type complete all as specified and shown on drg (Make Sleepwell/Kurlon)

SOFA SET 5 SEATER S&F in repairs following parts of sofa set 3 pieces 5 seats with Ist class hard wood as per existing shape and size duly finished complete all as specified and directed.

SOFA SEAT OF LONG PIECE (i) legs (Shall be made as per drg)

(ii) Arms (Shall be made as per drg)

(iii ) Front rail (Shall be made as per drg)

(iv ) Side rail (Shall be made as per drg)

(v) Batten (Shall be made as per drg)

(vi) Stiffener (Shall be made as per drg)

SOFA BACK OF LONG PIECE (i) Side rail (Shall be made as per drg)

(ii) Front rail (Shall be made as per drg)

(iii) Batten (Shall be made as per drg)

SOFA SEAT OF CHAIR SET (i) legs (Shall be made as per drg)

(ii) Arms (Shall be made as per drg)

(iii ) Front rail (Shall be made as per drg)

(iv ) Side rail (Shall be made as per drg)

(v) Batten (Shall be made as per drg)

(vi) Stiffener (Shall be made as per drg)

SOFA BACK OF CHAIR SET (i) Side Rail (Shall be made as per drg)

(ii) Top Rail (Shall be made as per drg)

(iii ) Bottom rail (Shall be made as per drg)

(iv) Batten (Shall be made as per drg)

M&L for polishing of sofa set 5 seater (3 +1+1) with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

BED PLY WOOD TOP;- S&F in repair following parts of bed Ply wood top as per existing shape and size duly finished as shown on drawing complete all as specified and directed.

Head rest shall be made as per drg

Foot Rest shall be made as per drg

Long rails shall be made of Ist class hard wood

Short rails shall be made of Ist class hard wood

Stiffener shall be made of Ist class hard wood

MS bracket of flat iron 25x3mm,200mm long fixed with screw

Ply wood top 12mm thick BWR type as per existing shape and size in One piece

M&L for polishing of bed Plywood top with high class French polish to all exposed surfaces except top & bottom after preparation of surfaces

REPAIR TO TABLE 900mm X 600mm WITH DRAWER S&F in repair of the following parts of table 900 x 600 with Ist class hard wood (teak) as per existing shape and size duly finished as shown on drawing complete all as specified and directed.

(a) Legs (Shall be made as per drg)

(b) Long rail (Shall be made as per drg)

(c) Short Rail (Shall be made as per drg)

(d) Bottom Side stiffener (Shall be made as per drg)

(e) Bottom centre stiffener (Shall be made as per drg)

(f) Drawer with 6mm thick commercial ply at bottom only and sides, back shall be 12mm th Ist class hard wood (teak) with knob

(g)Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all round complete all as shown in drg and directed

(h)M&L for polishing of table 900x600mm with drawer with high class French polish on all exposed surface except top & Bottom incl matching new components with old one after preparation of surface complete all as directed.

REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER:- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed

(a) Legs (Shall be made as per drg)

(b) Long Rail(Shall be made as per drg)

(c) Short Rail (Shall be made as per drg)

(d) Bottom Side stiffener (Shall be made as per drg)

(e) Bottom Centre stiffener (Shall be made as per drg)

(f) Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all ound complete all as shown in drg and directed

(g)M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR TO TABLE 900mm x 900mm:- S&F in repair following parts of the table 900x900mm with Ist class hard wood (teak) as per existing shape and size duly finished as shown on drawing complete all as specified and directed ;-

(a) Legs (Shall be made as per drg)

(b) Long rail (Shall be made as per drg)

(c) Short Rail (Shall be made as per drg)

(d )Table top of 18/19MM thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thick teak wood edging all round complete as shown in drg and directed.

(e)M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surfacecomplete all as specified and directed.

REPAIR OF TABLE BED SIDE S&f in repair of the following parts of Table Bed Side with 18mm th pre-laminated particle board as per existing shape and size duly finished as shown on drawing complete all as specified and directed;

(a) Top (Shall be made as per drg)

(b) Side (Shall be made as per drg)

(c) Shelf (Shall be made as per drg)

(d) Bottom (Shall be made as per drg)

(e) Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed

(f) Ist class hard wood (teak) 6mm beading at front on 18 th pre-laminated particle exposed portion of table bed side

(g)Ist class hard wood (teak) frame with 4 nos of legs duly french polish.

REPAIR OF TEAPOY : S&F in repair of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly finished as shown on drawing complete all as specified and directed:-

(a) Legs (Shall be made as per drg)

(b) Long rail (Shall be made as per drg)

(c) Short Rail (Shall be made as per drg)

(d) Side stiffener (Shall be made as per drg)

(e) Centre stiffener (Shall be made as per drg)

(f) Top-Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed

(g) Polish; M&L for polishing of teapoy with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR OF PEG TABLE :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly finished as shown on drawing complete all as specified and directed;

(a) Legs (Shall be made as per drg)

(b) Long rail (Shall be made as per drg)

(c) Short Rail (Shall be made as per drg)

(d) Side stiffener (Shall be made as per drg)

(e) Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed

TABLE WRITING : S&F in repair to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly finished as shown on drawing complete all as specified and directed.;-

(a) Legs (Shall be made as per drg)

(b) Long rail of table frame (Shall be made as per drg)

(c ) Short rail of table frame (Shall be made as per drg)

(d) Drawer including chromium plated knob of 40mm Dia (Shall be made as per drg)

(e)Bottom centre stiffener (Shall be made as per drg)

(f) Bottom side stiffener. (Shall be made as per drg)

(g) Taking out old U/S top and S&F new top of pre-laminated particle board one side teak wood face incl 6mm thick teak wood beadging all round top duly high class French polished complete all as shown in drg and directed.

REPAIR TO TABLE CENTRE:-S&F in repair of the following parts of table centre with Ist class wood (teak)As per existing shape and size duly finished as shown on drawing completed all as specified and directed;-

(a) Legs (Shall be made as per drg)

(b) Long rail (Shall be made as per drg)

(c) Short Rail (Shall be made as per drg)

(d) Side stiffener (Shall be made as per drg)

(e)Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed

REPAIR TO TABLE DINING 06 /08PERSON :- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly finished as shown on drg complete all as specified and directed.

(a) Taking down old U/S top of table dining 06/08pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

(b) Legs (Shall be made as per drg)

(c ) Long rail (Shall be made as per drg)

(d) Short rail (Shall be made as per drg)

(e) Stiffener (Shall be made as per drg)

CHAIR DINING ;-S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly finished as shown on drawing complete all as specified and directed;-

(a) Rear Legs (Shall be made as per drg)

(b) Front Legs (Shall be made as per drg)

(c ) Side rail of seat frame (Shall be made as per drg)

(d) Front/back rails of seat frame (Shall be made as per drg)

(e) Bottom stiffener (Shall be made as per drg)

(f) Vertical back stiffener (Shall be made as per drg)

(g) Nylon buffers on the bottom of legs (Shall be made as per drg)

(h)M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

REPAIR TO STOOL DRESSING: - S&F in repairs of following parts of stool dressing with Ist class hard wood (teak) as per existing shape and size duly completed all as specified and directed.

(a) Legs (Shall be made as per drg)

(b) Side rails of seat frame including holes for weaving (spacing of holes shall be match with the existing rail). (Shall be made as per drg)

(c) Front/Back rails of seat frame incl drlling holes for weaving (spacing of holes shall be match with the existing rail). (Shall be made as per drg)

(d) Recanning seat with new 2mm wide half round white plastic cane of superior quality in Godrej pattrn. (Shall be made as per drg)

(e) M&L for polishing of old/new surfaces with high class French polish to all exposed surfaces all as specified and directed.

REPAIR OF TABLE DRESSING GENTS;- Repair of following parts of table dressing Gents as per existing shape and size duly planned and finsihed as shown on drg complete all as specified and directed :-

(a) Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size. (Shall be made as per drg)

(b) Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size (Shall be made as per drg)

(c ) Removal of old U/S Drawer and fixing new Drawer made of prelaminated particle board and 6 mm thick ply wood commercial as per existing shape an size (Shall be made as per drg)

(d) Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

REPAIR OF TABLE DRESSING LADIES;- Repair of following parts of table dressing ladies as per existing shape and size duly finished as shown on drg complete all as specified and directed :-

(a) Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size. (Shall be made as per drg)

(b) Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size (Shall be made as per drg)

(c) Removal of old U/S sliding glass and fixing new glass of 3mm thick as per existing. (Shall be made as per drg)

(d) Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

(e) Removal of old U/S leg of table and fixing new legs of 1st class hard wood (teak) (Shall be made as per drg)

(f) Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

REPAIR TO SIDE BOARD: S&F in repair to the following parts of side board as per existing shape and size duly finished and completed all as specified and directed.

(a) Top (Shall be made as per drg)

(b) Bottom (Shall be made as per drg)

(c) Side (Shall be made as per drg)

(d) Shelves (Shall be made as per drg)

(e) Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated particle board front (Shall be made as per drg)

(f) Shutter with 40mm size knob (Shall be made as per drg)

(g) Back shall be made of 6mm thick commercial plywood. (Shall be made as per drg)

(h) Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (teak) (Shall be made as per drg)

(i) M&L for polishing of side board with high class French polish on all exposed surfaces except topand bottom incl after preparation of surfaces complete all as specified and directed

CHAIR EASY:- S&F in repairs following parts of the chair easy with 1st class hard wood as per existing shape and size duly finished as shown on drawing complete all as specified and directed ;-

Rear Legs (Shall be made as per drg)

Front Legs(Shall be made as per drg)

Side Rails (Shall be made as per drg)

Front/Back Rails (Shall be made as per drg)

Back Stiffener (Shall be made as per drg)

Bottom Stiffener (Shall be made as per drg)

Arms rest (Shall be made as per drg)

M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

CHAIR WRITING:- S&F in repair following part of chair writing with 1st class hard wood as per existing shape and size duly finished as shown on drawing complete all as specified and directed.

Rear Legs (Shall be made as per drg)

Front Legs (Shall be made as per drg)

Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing) (Shall be made as per drg)

Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing) (Shall be made as per drg)

Bottom Stiffener (Shall be made as per drg)

Back Stiffener (Shall be made as per drg)

Arm rest (Shall be made as per drg)

M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR DINING ;-S&F in repair following part of chair dining of 1st class hard wood as per existing shape and size duly finished as shown on drawing complete all as specified and directed;-

Rear Legs (Shall be made as per drg)

Front Legs(Shall be made as per drg)

Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)(Shall be made as per drg)

Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing) (Shall be made as per drg)

Bottom stiffener(Shall be made as per drg)

Back Stiffener (Shall be made as per drg)

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WOODEN BOTTOM :- S&F in repair following parts of the chair wooden bottom without arms with Ist class hard wood as per existing shape & size duly finished as shown on drawing complete all as specified and directed ;-

Rear Legs (Shall be made as per drg)

Front Legs (Shall be made as per drg)

Side Rails (Shall be made as per drg)

Front/Back rails of seat (Shall be made as per drg)

Back Stiffener (Shall be made as per drg)

Bottom Stiffener (Shall be made as per drg)

Seat of 6mm thick BWR copmmercial ply wood complete all as shown in Drg specified and directed. (Shall be made as per drg)

M&L for polishing of chair wooden bottom without arms with high class frenchpolish to all expensed surfaces except in side of seat frame(o4 sides) incl matching with new components with old one after preparation complete all as specified and directed.

POLISHING TO WOODEN FURNITURE M&L for preparation of previously treated wooden surfaces of furniture items by scrapping removing and cleaning all dirt/dust and filling previous surfaces or cavities with filler and applying one finishing coat of french polish of high glossy finish

Almirah wooden large with glass door

Almirah mess utensils

Almirah wooden large with shelves

Almirah wooden large without shelves

Almirah wooden large 1/2 shelves 1/2 Hanging

Almirah medium with shelves

Bench workshop type 'B' (10' x 4'x3' Top 3" thick)

Bench seating 8' x 2' x 1'-6"

Bench workshop but type 'D' (14'x4'x3" Top 3" thick)

Bench workshop but type 'E' (10' x 4' x 2'-8")

Bench workshop but type 'F' (5' x 2 - 6' x 2' x - 6")

Bench workshop but type 'M' 9' x 4' x 3") with drawer

Almirah map wooden

Bench workshop but type 'N" 9' x 3'- 6 x 2'-7 1/2") with drawer

Bench workshop but type 'C' 8' x 3' x 3' Top 2" thick

Bed Newar

Bed Hard Plywood top

Black board with easel pointer

Book case LP

Book shelf open large wooden

Book shelf open small

Book case 1060 x 300 x 840 mm

Board Notice 5' x 3'

Board Notice 900mm x 600mm

Board Notice 5' x 4'

Board Notice 1830mm x 1220mm

Chair CBA office

Combined 2 spaces with pigeon holes

Box Keys

Chair D'Man

Form without back

Hat stand with mirror

Peg table

Rack side 3/4 spaces

Form with Back

Stool wooden 2 feet high

Table 900mm x 600mm x 760mm for HAV/OR's

Table 5' x 2' x10"

Table dining 6 persons

Table dining ORs with sunmica top

Table dressing Gents with Mirror

Table dressing ladies

Table D'Man

Table writing

Table Bed side

Table dining 8 persons 1800 x 900 x 760mm

Table office clerk wooden

Table office officer wooden

Table wooden with fillets and drawer 1500mm x 800mm x 900mm

Table wooden with fillets and drawer 2000mm x 800mm x 850mm

pk Enterprises

M.K Enterprises