CWE/D-31/2023-24

Amount

Sch 'A' Part-I: (STEEL FURNITURE) (Note : The Steel furniture items catered under this Schedule can be manufactured & supplied by bidder himself or else procured from any of the agencies listed in Appendix 'A' for supply to the department).

Bed Hard Steel MAP (Drg No FD/E6/MAP/8R) :-The complete frame work shall be made of CRCA box section with 18 guage thick as per IS-4923. Bed top shall be 12mm thick BWP grade plywood and shall be fitted with shunken nuts/bolts and washer as directed by EIC. The foot board / head board shall be covered with 18mm thick prelamintated HDHMR board ext grade BSD with 0.8 mm thick PVC edging with edge bander machine, colour of board shall be approved by GE/EIC. Head rest and foot rest shall be detacheable. All metal work shall be powder coated , colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . irrespective of what is shown on drg ,bottom framing work of foot rest shall be of 18 mm CRCA box section with 18 Guage thick shall be used. Inner hard rubber shoe shall be provided to each legs. Rest all as per drg and as directed by EIC.

Chair Varandah (Drg No FD-256) :-The frame shall be made of 19/20mm dia MS conduit pipe of wall thickness 1.6mm. Canning shall be done with 4 mm wide in Godrej Pattern or as directed by Engr-in-Charge in seat and back. PVC/hard rubber toes shall be provided to the bottom of all legs. All steel surfaces shall be powder coated all as specified and shown on drg or as directed-by-Engr-In-Charge.

Table Office clk steel (Drg No FD-1004) :- All as shown on drg. Overall size of tabe shall be 1200 mm x 610mmx760 mm. Frame shall be made of 25 mm Square CRCA tube with 16 guage wall thickness. Three drawers of equal size shall be provided at right hand side. std quaility pvc Inner shoe shall be provided to each legs. S/S locks (make-Godrej/Harrison/Lico/Nova) shall be provided to drawer. Roller channel shall be provided each drwers for smooth functioning . Recessed handels shall be provided to each drawers as per sample kept at BSO yard. The top shall be made of 18 mm thick pre laminated partical board PFT teak face with 2mm thick PVC edging on two side of the top duly fixed with strong adhesive and fixed in position all as shown on drawing (Make: PFT Top Ecoboard/ Action-Tesa/ Greenply).All steel surfaces shall be powder coated finish. colour shall be approved by GE/EIC. Rest all as shown on drg or as directed by EIC.

Chair Writing (Drg No FD/E6/MAP/12) :-The overall size of chairs shall be as per drawing . 12 mm thick hot pressed plywood shall be used in seat and back.arm rest shall be made of PU. Seat and back shall be made of PU foam 50 mm thick with 50 density and fabric not less than Rs 300 per meter.frame shall be made of standard workmanship with black powder coated .PVC rings/ Hard rubber shoe shall be provide to each legs. Rest all as per drg and as directed by EIC.

Sub Total

Sch 'A' Part-II: (WOODEN FURNITURE) (Note : The wooden furniture items catered under this Schedule can be manufactured & supplied by bidder himself or else procured from any of the agencies listed in Appendix 'A' for supply to the department).

Bin Linen Multipurpose (Drg No FD/E6/MAP/09):-Top / Sides / Shutters / Drawers / bottom / partition shall be made of 16 mm thick plywood BWP grade with 1 mm thick laminate both side colour/shade shall be approved by EIC/GE. Telescopic channel(make-Ebco/Hettich/Ozone) shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick BWR ply with 1 mm thick laminate . Std quality magnetic catcher(make-Ebco/Hettich) shall be provided to each shutters. S/S handle shall be provided to shutter / drawer as per sample kept at BSO yard. 12mm thick plywood BWR grade shall be provided on back side .Teak wood Legs frame of size 75mm X 30mm thick shall be made all around the bottom of Bin linen with 02 Nos stiffener (25 x 25mm) complete as directed by Engr-in-Charge. Heavy duty s/s piano hings std quality shall be provided to each shutter. Std quality Cam lock connector/dowels fastenning /universal angle/PVC corner shall be used in fabrication body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces as directed by Engr-in-Charge .All wooden surfaces / wood based materials shall be melamine polished with high class finish. Rest all as per drg or as directed by EIC.

Book Case (Drg No FD-237):-Over all size shall be 1200mm x300mmx760mm. All wood shall be of first class hard wood teak well seasoned free from cracks,dead knots and other blemishes. Top, bottom, sides,vertical partition and shelves shall be made of 18/19mm thick pre-laminated MDF board exterior grade confirming to grade I & type III (PL MDF-13 Designation) as per IS 14587), both side teak face in Baverian Beach Shade. The back of book case shall be 6mm thick ply wood commercial type fixed with head less nails. All front edges of particle board and all round the shutters shall be provided with 3mm thick teak wood edging equal to thickness of the particle board. Irrespective of whatever shown on drg 02 Nos wall spring catches , one lock and one decorative type knob as approved by GE shall be provided to the shutter. All exposed wooden surfaces shall be polished upto required shining . Rest all as specified and shown on drg. or as directed by Engr-In-Charge.

Chair Dining Cushioned (Drg No FD/E6/MAP/10(R):-Timber shall be first class teakwood , seasoned free from knots & cracks with moisture content permissible limit as per IS-281-1973. Seat shall be made out of 75mm thick PU foam 40 density (Make-Sleepwell (Model-Primo cool) / Kurlon (Model-Gold line ) pasted with adhesive on 12mm thick BWR grade plywood covered with fabric/tapestry of cost not less than Rs. 350/-RM. Quality of fabric/tapestry (as per sample kept at BSO Yard). PVC rings shall be screwed to each legs. Fabrication of seat shall be done at BSO Yard. All wooden portion shall be smoothened to apply best quality melamine polish glossy finish (Make-Asian / Burger paints ) with spray machine. Right angle bracket/connecter (Make-Ebco/Hettich) shall be provided to each legs.Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

Chair Easy (Drg No FD-229):-Timber shall be first class teakwood , seasoned free from knots & cracks with moisture content permissible limit as per IS-281-1973. canning of seat and back shall be done as per Godrej pattern with 2 mm wide half round and border with 4 mm wide half round first quality cane. PVC rings shall be screwed to each legs. All wooden portion shall be smoothened to apply best quality melamine polish glossy finish (Make-Asian / Burger paints) with spray machine. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

Side Board (Drg No FD-241) :- All wood work shall be of 1st class Hard Teak wood. 18/19mm pre laminate particle board exterior grade as per for sides, top, shutter , shelf and front of drawer beading shall be 4mm teak fixed with head less nail. Back of the box and bottom of the drawer shall be of 6mm commercial plywood BWR of approved make. Sides and back of the drawer shall be 12mm commercial plywood. Shutter shall be fixed with piano hinges, 50mm Brass lock, Magnate catcher, 80mm long alluminium coated handle for shutter and drawer. 4mm thick teak wood edging all round exposed edges surfaces shall be provided as shown on drawing. All expose wooden surface shall be French polish. Rest all as shown on drawing.

Table 900x600x750 mm with drawer (Drg No FD-283) :-Over all size shall be 900mmx600mmx760mm. All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973. The top shall be made of 18 mm thick pre laminated partical board PFT teak face with 2mm thick PVC edging on two side of the top duly fixed with strong adhesive and fixed in position all as shown on drawing (Make: PFT Top Ecoboard/ Action-Tesa/ Greenply). Irrespective what ever shown on drg.02 Nos. side stiffener and one no in centre making H shape of size 20mm x60mm shall be provided at 100mm from bottom of legs. side, back and front of drawer shall be made of teak wood. Two nos.Telescopic channel(Make- Ebco/Hettich/Ozone) shall be provided for smooth functioning of drawer. Locks (Make- Harison / Link / Godrej) shall be provided to drawer and shutter. Four Nos PVC shoes shall be provided at the bottom of the legs fixed with screws.All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC.

Sofa Set 5 Seater (Drg No FD-281):- All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973.Cushion for seat & back shall be 100mm thick PU foam 40 density (Make-Sleepwell (Model-Primo cool) / Kurlon (Model-Gold line ) coverd with good quailty, tapestry cloth not less than Rs. 450/- RM. Tapestry as per sample kept at BSO Yard. PVC shoe shall be proveded to each legs.All wooden portion shall be smoothened to apply best quality melamine polish glossy finish (Make-Asian / Burger paints) with Gun- spray machine. Polish work shall be done at BSO Yard. Rest all as per drg or as directed by EIC.

Table Dinning 6 Per (Drg No FD-273) :-All as shown on drg. Over all size shall be 1500mmx900mmx760mm. All wood shall be of first class hard wood teak well seasoned free from cracks, dead knots and other blemishes. The top shall be made of 18 mm thick pre laminated partical board PFT teak face with 2mm thick PVC edging on two side of the top duly fixed with strong adhesive and fixed in position all as shown on drawing (Make: PFT Top Ecoboard/ Action-Tesa/ Greenply). 08 Nos MS bracket of size 60mm x 30mm shall be fixed with screw on corner of the legs. Four Nos PVC shoes shall be provided at the bottom of the legs fixed with screws. All wooden portion shall be smoothened to apply best quality melamine polish glossy finish (Make-Asian / Burger paints ) with spray machine. Polish work shall be done at BSO Yard. Rest all as per drg .

Table Peg (Drg No FD-277) :- All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. The top shall be made of 18 mm thick pre laminated partical board PFT teak face with 2mm thick PVC edging on two side of the top duly fixed with strong adhesive and fixed in position all as shown on drawing (Make: PFT Top Ecoboard/ Action-Tesa/ Greenply).Irrespective what ever shown on drg.two nos top side rails of size 20mm x 40mm shall be provided and 02 Nos. side stiffener and one no in centre making H shape of size 20mm x40mm shall be provided at 100mm from bottom of legs. Hard nylon shoe / buffers shall be provided to each leg. Top side rail and center stiffner shall be provided to each table peg irrespective of what is shown on drg as directed by EIC.All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC.

Table Writing (Drg No FD 275) :-All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973. The top shall be made of 18 mm thick pre laminated partical board PFT teak face with 2mm thick PVC edging on two side of the top duly fixed with strong adhesive and fixed in position all as shown on drawing (Make: PFT Top Ecoboard/ Action-Tesa/ Greenply). Right bracket/ connecter of MS shall be secrewed to the each legs . Side, back and front of drawer shall be made of teak wood. Two nos.Telescopic channel(Make- Ebco/Hettich/Ozone) shall be provided for smooth functioning of drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Locks (Make- Harison / Link / Godrej) shall be provided to drawer and shutter. Four Nos PVC shoes shall be provided at the bottom of the legs fixed with screws.All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC.

Teapoy (Drg No FD-278) :- All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. The top shall be made of 18 mm thick pre laminated partical board PFT teak face with 2mm thick PVC edging on two side of the top duly fixed with strong adhesive and fixed in position all as shown on drawing (Make: PFT Top Ecoboard/ Action-Tesa/ Greenply). Irrespective what ever shown on drg. Two nos top side rails of size 20mm x 50mm shall be provided and 02 Nos. side stiffener and one no in centre making H shape of size 50mm x 20mm shall be provided at 100mm from bottom of legs. Hard nylon shoe / buffers shall be provided to each leg. All exposed wooden surfaces shall be high glossy melamine polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg or as directed by EIC.

Bath Mat / Stool (Drg No FD/E6/MAP/07) :- All as shown on drg. Over all size shall be 400mm x 300mm x 250mm and made of poly vinyl chloride. The legs shall be of 100 x 100mm in arc shaped with centre support of 25mm dia leg, all are integrally moulded with 3mm x 10mm stiffeners (Make-Cello/Supreme/Neelkamal). The edge shall be moulded downward by 15mm alround. Seat shall be of 5mm thick PVC. Rest all as per drg or as approved by GE.

Recepticle with bucket (Drg No FD/E6/MAP/13) :- All PVC work shall be of standard class thick polymer plastic. pedestal type receptacle alongwith bucket with capacity not less than 20 ltrs shall be supplied (Make- Cello / Nayasa / Sintex / Supreme/JOYO/Nilkamal) Rest all as per existing trade pattern or sample held with BSO yard (Make-Cello/Milton)

Sub Total

RK STEEL FABRICATORs

SMS Enterprises