Tool kit for MSDAC ALTPRO as per RDSO specification No. RDSO/SPN/176/2013 Ver.- 3 & Manufacturers's Spec. or latest suitable with existing installations of Altpro (Sigma Rail Systems Pvt. Ltd).

Purchase Restriction :- (i) This is a PAC item of ALTPRO Make being a spares part of ALTPRO make Digital Axle counter. Bulk or Entire Purchase shall be made from SIGMA RAIL SYSTEMS PRIVATE LIMITED-KOLKATA or their authorized dealer.

Authorized dealer shall submit valid tender specific authorization along with their offer other wise their offer will be summarily rejected.

Restrictions of procurement from the bidders from countries sharing land borders with India: In terms of clause 2.4.3 of Instruction to Tenderers for e-Tenders, Rev. 1.21 of April 2024 regarding restrictions on procurement from bidders of a country sharing land border with India, bidder must confirm that ''I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and confirm that I comply with any one of the following two conditions: (a) I certify that I am not from such a country; or ( b ) I am from such a country and have been registered with the Competent Authority. I hereby certify that I fulfill all requirements in this regard and is eligible to be considered. Evidence of valid registration by the Competent Authority is attached.''

Make in India Policy (Indication of Local Content) : In keeping with the Public Procurement (preference to Make in India) Order, 2017 as amended and in terms of Clause 2.4.2, 2.4.5 and 2.4.6 of Instructions to Tenderers for e-Tender, Rev. 1.21 of April 2024, Public Procurement of this item is restricted to Class-I and Class-II local suppliers only. Thus, only Class-I and Class-II local suppliers as defined under the Public Procurement (preference to Make in India) Order, 2017, as amended shall be eligible to bid in this tender. Offers from vendors who do not quality to be Class-I or Class-II local suppliers shall be summarily rejected and, therefore, such vendors should not participate in the tender. In case any vendor who does not qualify to be a Class-I or Class-II local supplier for the tendered item participates in the tender, such a bidder does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the bidder on this account. The bidders must indicate the percentage of local content in the material being offered in the range of 0-100. The value '0' (Zero) is for fully imported items and 100 for fully indigenous items. The local content percentage in their offered product should be entered under remarks or by uploading/documents in respect of this, failing which the offer will be summarily rejected without making any reference from the Purchaser.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Inspection by TPI (Third Party Inspection).

If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small enterprise (in percent of order value) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fields; Micro owned by SC micro owned by ST, Micro owned by others, Small industry owned by SC, Small industry owned by ST, Small industry owned by others)

EMD: In terms of clause 3.0 of the Instructions to Tenderers for E.tenders, NR ITT_Rev_1.21_April_2024 and Correction Slip No. 01 of ITT_1.21_April_2024 , Bidders not failing in the exempt category for furnishing EMD, are required to Mandatorily furnish the requisite EMD along with their offer, Failing which their offer will be summarily rejected.

SD: Security Deposit/Performance Security : In terms of clause 12 of NR ITT Rev. 1.21 of April 2024. The successful tenderer shall have to deposit 5 percent SD within 21 days of issue of Letter of Acceptance.

Instructions to Tenderers for Electronic Tenders, Rev. 1.21_April_2024 and Correction Slip No. 01 of ITT_1.21_April_2024 and have been uploaded on IREPS website ireps.gov.in and can be accessed after logging in, using the allotted username, password and digital signature, through the link NORTHERN RLY/STORES Documents available in the Document section on the IREPS home page. These revised instructions shall be applicable to this tender in place of Instructions to Tenderers (Pamphlet No.1). Tenderers are advised to go through these instructions before submission of their offers. Special attention is drawn to Para 2.0, 2.4.3, 3.0, 5.0, and 9.0, of Instruction to Tenderers for Electronic Tenders, Rev. 1.21_April_2024 and Correction Slip No. 01 of ITT_1.21_April_2024