Construction of Bangla Sahayata Kendra and Baby Feeding Center at the Ground Floor Of AMC Head Office and construction of shed at AMC Head Office Main Gate (East Side) and Beautification of Main Gate (South Side) under Asansol Municipal Corporation.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor 12 mm [PWD Bulding Sch. Page No-173 IT No-2

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor [PWD Bulding Sch. Page No-179 IT No- 14

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. xiii) 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II) [PWD Bulding Sch. Page No- 243 IT No- 9

v) 6mm thick clear glass.

Providing & fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from MS sheet & galvanized with Zinc Coating of 150gms/sqm (both side included) as per IS:277 & consisting of angle clets of size 25mm wide X 1.6mm thick with flanges of 27mm & 37mm, at 1200mm centre to centre, flange fixed to the ceiling with dish fastner 12.5mm dia X 50mm long with 6mm dia bolts other flange of fixed clits to the angles of 25X10X0.50mm of required length with nuts & bolts of required size & other end of angle hanger fixed with intermidiate GI Channels 45X15X0.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.56mm thick bottom wedge of 80mm width tappered flanges of 26mm each having lips of 10.5mm, at 450mm centr to centre, shall be fixed in a direction perpendicular t GI intermidiate channel with connecting clips made out of 2.64mm dia into 230mm long GI wire at evry junction including fixing perimiter channels 0.5mm thk. 27mm having flanges of 20mm & 30 mm long, the perimiter of ceiling fixed to wall/ partitions with the help of raw plugs at 450mm entre with 25mm long dry wall screws all as per manufacturers specifications & also including the cost of making openings for light fittings grills diffusers counts made with frame of perimeter channels suitably fixed all complete as per drawings , specifications & directin of EIC but excluding the cost of painting with :(ISI Mark on board.) [PWD Bulding Sch. Page No- 165 IT No- 17 5th corr.

(b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. [PWD Bulding Sch. Page No- 143 IT No- 17

i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. [PWD Bulding Sch. Page No- 143 IT No- 23

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: a) With continuous plate base (Hexagonal/ Round rod) (vii) 150 mm grip x 12 mm dia rod. [PWD Bulding Sch. Page No- 146 IT No- 30

Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed complete with steel screws. (f) 125mm. X 125mm. X 27mm. X 2.50mm. [PWD Bulding Sch. Page No- 141 IT No- 6

Supplying, fitting and fixing Godrej Multi Lock or equivallent. [PWD Bulding Sch. Page No- 147 IT No- 39

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor: (b) 25mm thick shutters (single leaf) [PWD Bulding Sch. Page No- 124 IT No- 12

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white 3- track sliding window i) Bottom frame (Page - 233 , item- 1 b)

Top and side frame.

d)Shutter for all track sliding window i) Bottom & Top member. (Page - 233 , item- 1 d)

ii) Style side member.

iii) Interlock member.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. IN WALL With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Area of each tile upto 0.09 Sq.m. Coloured decorative (Page - 64 , item- 35 b,a,i) Analysis Rate

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster [ Item no.-1,(i),b page-189] Analysis Rate

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth Item no.-8,a page-15] Analysis Rate

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof [PWD Bulding Sch. Page No- 99 IT No- 1 3rd Corr.]

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mmdia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (i) In Roof:- a) With 0.5 mm thick sheet [PWD Bulding Sch. Page No- 83 IT No- 14

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @1% for each addl. floor upto 4th floor and @1.25% for each addl. floor above 4th floor) (ii) Grill weighing above 16 Kg./sq.mtr and above [PWD P-104 IT NO-13,ii]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/ call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC, Average run 6 mtr PWD SOR, P- E-9, IT-2.a.i

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC, On Board. PWD SOR, P- E-10, IT-4.a.i

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC PWD SOR, P- E-6, IT-22

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/ perspex cover and making necessary connections as required PWD SOR, P- E-6, IT-22

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required PWD SOR, P- E-7, IT-23

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. L&T make, 40 A PWD SOR, P- D-5, IT-7

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection, L& T make, 6-32 Amp PWD SOR, P- D-5, IT-7

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. L&T make, 2+6 way. Enclosure (LTSD08N) PWD SOR, P- D-10, IT-13

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C- Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. PWD SOR, P- E-19, IT-17

Supply & fixing of Green LED ultimatre square (6'X6') , incl. cutting the false ceiling in requd. Dimesion also the wiring and connection of the light by 1.5 sqmm wire complete. Havells make 18 watt Irrigation & waterways SOR, P-110, It-5.3. F.7

Supply and delivery of Ceilling fan 48” Sweep a) Crompton Greaves make UD &MA SOR, P- 23, It-70

Supplying, Fitting and Fixing of Roller blinds except white colour which is excellent quality fabric including MS roller stand with powder coated & M.S channel for blind adjustment, elegance and versatility. On the one hand, their simple design with straight lines allows them to complement any space without drawing too much attention. They are ideal especially for the minimalist, classic or industrial designs. On the other hand, their versatility is manifested mainly in the wide variety of materials and colors in which they can be manufactured. with necessary fitting complete in all respect of as specified in the drawings in accordance with the Architects Instructions and as specified design of Architect / EIC. Ref- W/O No - 115/WS/Eng/25 Dated - 02.06.2025

GST (B)= A x 18 % ( From It. No - 01 to 28 )Rs.

Add CESS @ 1 %