REPAIR TO STONE GRIT PLASTER AND CEMENT PLASTERING TILING AND MISC WORK INCLUDING PERIODICAL SERVICES AT TARAPORE OFFRS ENCLAVE RANGPURI UNDER AGE B/R-II (S) OF GE SOUTH DELHI CANTT-10

Amount

Taking down cement or grit plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc and removing the rubbish out site the MoD land complete all as specified and directed by Engineer-in-charge.

M&L for 15mm thick rendering in cement mortar 1:4 on brick/ concrete surface finished fair even and smooth without using extra cement and applying a coat of liquid water proofing compound as per manufacturer's instructions over newly plastered surface, complete all as specified and directed by Engineer-in-charge. Note: Liquid water proofing compound shall be measured and paid seperately.

M&L for 15mm thick rendering in cement mortar 1:6 on brick/ concrete surface finished fair even and smooth wihout using extra cement and then applying a coat of liquid water proofing compound as per manufacturer's instructions over newly plastered surface, complete all as specified and directed by Engineer-in-charge. Note: Liquid water proofing compound shall be measured and paid seperately.

M&L for 10mm thick rendering in cement mortar 1:3 on ceiling and finished fair even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surface on wall and applying two coats of cement base paint complete all as specified and directed by Engineer-in-charge.

M&L for preparing of newly plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of newly plastered or unplastered surfaces of wall and applying three coats of White wash, complete all as specified and directed by Engineer-in-charge.

M&L for Preparing newly plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over including one coat of birla white wall care putty on whole surface to obtain desired finish, complete all as specified and directed by Engineer-in-charge.

Supply only liquid water Proofing Compound, complete all as specified and directed by Engineer-in-charge.

Dismentling floors, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

M&L for vitrified Ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-charge. (Make : Kajaria, Johanson tiles,Somany)

M&L for first quality Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc laid on 15mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-charge. (Make : Kajaria, Johanson tiles,Somany)

M&L for preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of white wash on Ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of wall by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of white wash on wall complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of Cement base paint on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted Steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint of approved shade/tint complete all as specified and directed by Engineer-in-charge.

M&L for 12mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 20mm thick rendering in cement mortar 1:6 set and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed by Engineer-in-charge.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engineer-in-charge.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed by Engineer-in-charge.

Note : 1. The work will be carried out upto (G+4) storey. All necessary scaffolding,trestles, ladders arrangement will be provide by the contractor. The rates may be included in the respective items while quoting the rates by the contractor in item No. 01 to 20. 2. Item No. 01 to 20 has to be executed in patches or full, as specified & directed by the Engr-in-Charge. 3. Construction Safety net will be provided by the contractor during execution of the work as directed by Engr-in-Charge. The rates may be included in the respective items while quoting the rates.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

M/S Blues Developers Pvt. ltd

Chaudhary Constructions