CA NO. CWE SGNR-25 OF 2019-20 SPECIAL REPAIRS / REPLACEMENT OF UNSERVICEABLE LT PANEL WITH ALLIED WORKS AT MILITARY STATION SRI GANGANAGAR (2ND CALL)

Amount

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.8x1.8x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out door type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specified and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Draw out type ACB 800A, 50KA, 4 pole , 415 volt 50HZ. -01 No , IPBN with N type (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 4 pole, 415 volts, 200 Amp with breaking cap 35 KA-09 Nos TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.1 times of incomer breaker -01 set.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specifed and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Micro processor based release MCCB 400A, 35KA, 4 pole , 415 volt 50HZ . -01 No (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 4 pole, 415 volts, 160 Amp with breaking cap 35 KA-04 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type (b) MCCB 4 pole, 415 volts, 100 Amp with breaking cap 35 KA-01 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.5 times of incomer breaker -01 set.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specifed and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Micro processor based release MCCB 250A, 35KA, 4 pole , 415 volt 50HZ . -01 No (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 4 pole, 415 volts, 63 Amp with breaking cap 25 KA-07 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.5 times of incomer breaker -01 set.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specifed and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Micro processor based release MCCB 400A, 35KA, 4 pole , 415 volt 50HZ . -01 No (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 4 pole, 415 volts, 200 Amp with breaking cap 35 KA-02 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type (b) MCCB 4 pole, 415 volts, 63 Amp with breaking cap 25 KA-01 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.5 times of incomer breaker -01 set.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specifed and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Micro processor based release MCCB 250A, 35KA, 4 pole , 415 volt 50HZ . -01 No (b) Set of three phase indicating lamps-01 Set. (d) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 4 pole, 415 volts, 100 Amp with breaking cap 35 KA-05 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type (b) MCCB 4 pole, 415 volts, 63 Amp with breaking cap 25 KA-01 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.5 times of incomer breaker -01 set.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specifed and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Micro processor based release MCCB 250A, 35KA, 4 pole , 415 volt 50HZ . -01 No (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 4 pole, 415 volts, 160 Amp with breaking cap 35 KA-02 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type (b) MCCB 4 pole, 415 volts, 63 Amp with breaking cap 25 KA-01 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.5 times of incomer breaker -01 set.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specifed and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Micro processor based release MCCB 250A, 35KA, 4 pole , 415 volt 50HZ . -01 No (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 4 pole, 415 volts, 63 Amp with breaking cap 25 KA-05 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.5 times of incomer breaker -01 set.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.0x1.0x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope top powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above ground level and 0.3 mtr below ground level including PCC for foundation and coping , internal copper control wiring suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 times for incoming including removing of all panel connection and complete all as specifed and directed by Engineer-in-Charge with following accessories :- INCOMING (a) Draw out type ACB 800A, 50KA, 4 pole , 415 volt 50HZ. -01 No,IPBN with N type (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING (a) MCCB 315 Amp 35 KA - 02 Nos,TAB2 Adjustable tharmal & Fixed Magnatic Type (b) MCCB 200Amp 25 KA - 01 No,TAB2 Adjustable tharmal & Fixed Magnatic Type (c) MCCB 160 Amp 25 KA -02 Nos,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 4 nos capacity and rating 1.5 times of incomer breaker -01 set.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 20mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and preforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 complete all as specified and directed by Engineer-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is encluded in this item. (iii) Water pipe shall be provided in slainting position. (iv) 20mm dia galvanized iron pipe for watering shall be provided with a socket and plug and shall be 10cm above the ground level.

S & F in repairs, replacement of GI 32 mm x 6 mm thick with saddle / mounted on porcelain insulator / laid in trenches as required complete all as specified and directed by Engineer-in-Charge. Note- The distance between porcelain insulator will not be more than 0.5 Mtr. used in earthing system enhancement beyond 7.5 mtr of earthing

Supply, laying, jointing, testing and commissioning under ground LT cable, 185 sqmm, 3.5 core 1100volts graded, XLPE insulated armoured and PVC sheathed with stranded alumunium conductor, heavy duty, ISI marked, including cable glands, cable lugs etc to suitable cable size, laid in tranches, fixed along the pole or throgh GI pipe laid under floors etc fixed concealed in walls encased in GI pie etc complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing, testing and commissioning under ground LT cable, 35 sqmm, 3.5 core 1100volts graded, XLPE insulated armoured and PVC sheathed with stranded alumunium conductor, heavy duty, ISI marked, including cable glands, cable lugs etc to suitable cable size, laid in tranches, fixed along the pole or throgh GI pipe laid under floors etc fixed concealed in walls encased in GI pie etc complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing, testing and commissioning under ground LT cable, 10 sqmm, 2 core 1100volts graded, XLPE insulated armoured and PVC sheathed with stranded alumunium conductor, heavy duty, ISI marked, including cable glands, cable lugs etc to suitable cable size, laid in tranches, fixed along the pole or throgh GI pipe laid under floors etc fixed concealed in walls encased in GI pie etc complete all as specified and directed by Engineer-in-Charge

Supply, laying, jointing, testing and commissioning under ground LT cable, 16 sqmm, 2 core 1100volts graded, XLPE insulated armoured and PVC sheathed with stranded alumunium conductor, heavy duty, ISI marked, including cable glands, cable lugs etc to suitable cable size, laid in tranches, fixed along the pole or throgh GI pipe laid under floors etc fixed concealed in walls encased in GI pie etc complete all as specified and directed by Engineer-in-Charge

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out including taking out old brick or precast cable cover for reuse complete all as specified and directed by Engineer-in-Charge

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge

M&L for sand cushioning with dry coarse sand to underground cable 23cm thick, 8cm thick below the cable and 15cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge.

M & L for brick protection with old size sub class 'B' well burnt bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

M&L for boring holes under road/pavement/hard standing or any other situation by manual suitable for passing GI Light Grade pipe 80 mm bore and making good both the ends complete all as specified and directed by Engineer-in-Charge -------------------------------------------------------------------------------------------------------------- Note : A sum of Rs. 98,600.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 26(R)(R) (Schedule of Credit) of Tender document

KHANNA CONSTRUCTIONS

Ganganagar Enterprises

UNITED ENGINEERING CORPORATION

M/s Rohit Construction Co.

shiv shanker enterprises

Aggarwal brothers and company

Gyan Chand Marothia Engineer Contractor And Suppliers

Surjit and Sons

SRI SAI CONSTRUCTION COMPANY

MORESHWAR ELECTRICALS CORPORATION