Construction of Office Building including Civil Work Estate AND Internal Public Health Services AND Electrical services for Division No 1 2 Batala office Batala Distt Gurdaspur

Amount

Constructions of Office (Extra for floor, Plinth Protection, Carriage Material, Boundary wall, Internal concrete Road, Construction of Foot Path & Flooring & Wall Tile

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 meters.

Cement concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type.

Cement concrete 1:5:10 with 40 mm stone ballast using concrete mixing volumetric type

Cement concrete 1:4:8 with 40mm guage stone aggregate using concrete mixing volumetric type.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in super structure.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in super structure.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for columns (Square or rectangulr or ply gonal in blain) column upto NSL

Centering and shuttering for flat surfaces such as suspended floors roofs landings chajjas sheves etc.

Centering and shuttering for sides and soffits of beam beams launchings girders bressumers linetls

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

Extra rate for brick work

Extra rate for brick work

115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure.

Extra rate for first floor

12.50 mm Cement Plaster 1:5 on walls

20 mm thick Cement Plaster 1:5 in two coats work.

12.5 mm thick cement plaster 1:4

20 mm thick Cement Plaster 1:4 in two coat work.(Area same above)

Bearing plaster of 10mm thick cement mortar 1.3 cement sand finished with a floating coat of neat cement and thick coat of lime wash / POP on top of walls when dry for bearing of RCC slabas and beams

Extra for smooth surface of ceiling

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in-charge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer-in-charge.

Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S. flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyphonage pipes to walls complete in all respects. Including cutting and making good the walls and floor etc. and painting. M.S. Holder Bats clamps 100 mm i/d H.C.I. pipes

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16

Providing and fixing in position gratings 150 mm x 150 mm on top Khura PVC grating.

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3

Terracing consisting of tiles 22.86 x 11.43 x 3.83 cm laid over 25mm mud plaster 7.5cm mud filling on anoterh layer of 25mm mud plaster including grouting with cement sand

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Earth filling with good quality earth obtained from outside the plinth including compensation of earth, loading, unloading, carriage from outside the premises to site of work, spreading, laying watering compacting with rammer complete as per specifications.

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar up to 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead up to 30 metres

Base course of floor consisting of 100 mm thick cement concrete 1:8:16 with stone aggreate and 100mm sand filling.(using mechanical mixer for mixing of material)

Conglomerate floor 40 mm thick cement concrete topping 1:2:4 (using mechanical mixer for mixing of material).

Screed of 50mm thick cement concrete 1:8:6 to be laid below the toping (Using mechanical mixer for mixing of material)

Extra for first floor

Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing.

Extra Rate for first floor

Extra Rate for second floor

Kota stone tile flooring 20mm thick in skirting riser of stemp dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement and 3 sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and publishing

Providing and fixing Morwad marble stip 18mm to 20mm thick and 100mm wide in Kotah stone flooring over 12.50 thick base of cement mortor 1.3 jointed with cement complete in all respect

Providing and laying vitrified floor tiles 600x600mm size premium quality, manufactured using Soluble Salt Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 fine sand) for new flooring laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per sqm of tile area in average 3mm thickness over existing base, including grouting the joints (Tiles to be laid with 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout) with cement based grout and matching pigments etc., complete

Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge.

Supply & fixing of door frames (Chowkhats) consisting frame fabricated from sheet roll formed out of 1.2 mm thick galvanized sheet as per IS:277 (base steel as per IS:513) with zinc of 120 gm/Sqm. & Powder coated with pure Polyster powder up to 50 micrones (as per approved colour), 3 Nos. 100 mm but hinges 2 mm thick, 6 Nos. 1.2 mm thick CRCA electroplated stiffner, 6 Nos. M.S. hold fast with split and tail welded to stiffner plate 200 mm long, Receiver for adrop, M.S. tie rod 50 mm x 25 mm to be fixed at bottom finished with powder coated total thickness of coating 0.60 mm of approved shade, fixed in position, including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification and entire satisfaction of Engineer-in-Charge. Doors frame of size 80 mm x 50 mm with 37 mm wide single rebate for 35 mm door shutter.

Window outer frame size 72mmx55mm and central mullion 72mm x 50mm with double rebate

Doors frame of size 125 mm x 60 mm with 37 mm wide double rebate for 35 mm door shutter.

Supply & Fixing of Window shutter consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanished sheet (base steel as per IS : 513) with zinc of 120gm/som steel sheet pre coated (as per approved colour) with polyster paint of 12-16 micrones thickness under coat of EPOXY primer & back coated with ALKYD backer of 5-7 micrones total thickness of coating 0.58mm of approved shade, fixed in position fixed in position by means of screws complete in all respects as per drawing, design, specification & entire stasfication of Engineer-in-Charge. Glazed Windows shutter Section 47 mm x 20 mm (Without Glass)

Wire Mesh Windows shutter Section 40mm x 20mm with S.S wire mesh 32 guage flymesh with 144 holes per square inch

Providing 8, fixing fixed beeding 12 mm x 12 mm for fixed glass with EGO fixed gasket (EPDM)

Providing and fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of Gasket /beading shall bepaid as per respective item) Float Glass panes of 5.5 mm thickness

Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.

Iron grated doors, including pintle hinges and arrangements.

Extra for providing ployster powder coating 60 to 70 micron any coloured specified to MS grills section of various sizes including carriage of material from market to workshop

Providing and fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50 mm dia stainless steel pipe, balusters of 40 mm dia stainless steel pipe complete in all respect as per specification and entire satisfaction of Engineer-in-Charge. (Railing on Entrance Ramp) Design as per guidelines issued for persons with disability)

Factory manufactured flush door fixed in position iroin hinger etc cost of any fitting other than specified above but including laobur for fixing the same in position

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300 mm x 16 mm

Providing and fixing 0.50 mm thick aluminium sheet including cost of necessary fittings i.e. screws, etc. complete

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete - I.S.I Designation No. III (size of door 851 mm to 1000 mm)

Providing and fixing 12mm thick 150mm wide pelmets with 25mm dia Aluminium rod and brackets including fixing with 25mmx3mm MS Flat 10cm long and PVC Plugetc complete Deodar Wood

Providing and fixing of false ceiling at all heights of 600 x 600 x 15 mm / 600 * 1200 * 15 mm Mineral Fibre ceiling tiles of type DUNE RH-99 laid in grid system. The frame work comprise of made of GI 120 GSM coating with minimum 0.3 mm thickness main runner spaced at 1200 mm centre to centre securely fixed to the structural soffit by approved hangers at 1200 mm maximum centres. Hangersa (GI wire of 4 mm dia) to be fixed by approved roof plug, level adjusters and screw etc. The last hanger at the end of each main runner should not be greater than 450 mm from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stitching) to be interlocked between main runners at 600 mm centres to form 1200 x 600 mrn modules. Cut across tees longer than 600 mm to be supported independently. 600 x 600 mm modules to be formed by fitting 600 mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angle secured to walls at 450 mm maximum centres complete in all respects as per specifications. (Xen office)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2006, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Extra for steel 1st floor

Extra for steel second floor

Providing and applying plaster of parts (ISI marked) pumping 6mm thickness over plastered surface3 to prepared the surface even and smooth complete in all respect as per the directions of Engineer – in charges

Preparation of plastered or concrete surface for painting (inclduign sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required

Distempering with acrylic washable oil bound distemper of approved manufacture two coats over one priming coat to given an even shade

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. - With ordinary quality Paint

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm.

Carriage of Material Extra carriage of fine aggrigate payable upto lead 65 km

Extra carriage of fine aggrigate (Bajri) payable upto lead 65 km

Extra carriage of bricks payable

Providing and laying in super structure for first storey factory made with vibro hydraluic compaction machine precast hoolw block of cement concrete setting in position with cement morter 1:3 (1 cement 3 course sand) including cost of hosting centering and shuttering compelte in all respect

Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with cement contents 350kg per cum and coarse and fine aggregates conforming to IS:383 mixed with concrete mixer using weigh batcher, laid in position over 125 micron thick polythene sheet, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, including provision of contraction and expansion joints as required, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications

Providing and laying 60 mm thick cement concrete interlocking paver block of M- 35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibro-hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Medium Traffic Areas such as City streets, small & medium market roads, low volume roads, utility cuts on arterial roads, etc.

Providing and laying 60 mm thick cement concrete interlocking paver block of M- 35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibro-hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Medium Traffic Areas such as City streets, small & medium market roads, low volume roads, utility cuts on arterial roads, etc.

Plain cement concrete M-20 grade precast kerb 250mm high with bottom width 165mm and top width 115mm fixed in position including carriage to site of work complete as per technical clause 408 of MORT&H specifications

Internal Water Supply, Sewerage, Sanitation Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge )including cutting, jointing, wastage, but excluding cost of lead jointing.Type - B 110mm o/d SWR UPVC pipe line laid complete

75mm o/d SWR UPVC pipe line laid complete

Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -14735 of approved make (to the approval of Engineer-in-charge )including cutting, jointing, wastage, but excluding cost of lead jointing.Type - B (For 110mm i/d pipe) Bend Plain

Collars

For 75mm i/d pipes Bend Plain

Collars

With 75mm i/d outlet deep seal at Ground Floor/ First floor

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. Size 450 mm x 450 mm inside with RCC 455 mm x 455 mm cover and frame medium duty double seal

Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. uPVC Pipe 6 Kgf/cm2 50mm i/d

Internal Water Supply System Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 15mm i/d

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm

Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. Through wall 11.43 cm thick

Through wall 22.86 cm thick

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. 15mm i/d G.I. Union

20mm i/d G.I. Union

25mm i/d G.I. Union

40mm i/d G.I. Union

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 25mm i/d Brass Ball valves

40mm i/d Brass Ball valves

Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc. 15mm & 20mm i/d G.I. Pipe

25mm & 32mm i/d G.I. Pipe

40mm & 50mm i/d G.I. Pipe

Sanitary Installation Providing and fixing in position Chinaware Indian Orisa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge. at First Floor

Providing and fixing in position Chinaware wall hunged European type water closet with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position Metropole flush valve 32mm size dual flow (Concealed body) with exposed shut off provision and round plate complete in all respect.

Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut

Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge)consisting of C.P. brass waste 32mm diawith one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 550 mm x 400 mm x 815mm

Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.

Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing in position stainless steel sinks of approved make (to theapproval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm

Providing & fixing in position best Indian make PVC flexible tube connection. PVC tube connection of size 15 mm x 375 mm with PTMT nut OWC+EWC+WB+Urinal+Water cooler

Providing and fixing PVC waste pipe 32mm complete in all respect. WB+Urinal+Steel sink (-) Bottle trap

Providing and fixing in position C.P. brass, bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-in-charge) complete in all respect. For Washbasin & Urinal

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P. brass towel Rails size 15mm dia 610mm long

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock long nose/ long body without flange

C.P Brass bib cock without flange

Providing & Fixing in position stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Angle valve

C.P.brass 15mm Concealed stop cock with flange

Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. Note:-To be provided only for VIP Installations and with prior approval of the Engineer-in-charge. C.P. Brass fittings:

C.P.brass 15mm Angular stop cock with Wall flange

D/d jet spray which will be directly with hex nipple C.P.brass 15mm Concealed stop cock with adjustable wall flange.For Jet Spray Connection

C.P. brass Central hole basin mixer without popup system with 450mm long flexible hose

Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. C.P. Brass khunti with 3 pegs

C.P. brass soap dish holder with glass dish

C.P. Glass Shelf 600mm long

C.P. brass towel rail 600 mm long

Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. C.P. Brass khunti with 3 pegs

Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (2000+1000+500) Double Layer Tanks

Providing and fixing in position automatic brass cock in tanks Brass Ball Cock with rod and Plastic Ball 32mm i/d

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 25mm i/d

Construction of Plateform complete as per specification & as desired by Engineer-in-charge

Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. 25 litre capacity water heater

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying rectified porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturre) of premium quality conforming to IS 15622 of approve make in colours laid on 20mm thick bed of cement mortar 1:4 (1 cement 4 fine sand) for new flooring or laid with cement based high plymer midifed quick site tile adhesive (water based) of approved make IS 15477 marked using 5kg adherisve per sqm of tile area in average 3mm thickness over existing floor including pointing the joints with white cement and matching pigments etc complete ( Ground floor + 1st floor) (24.65+34.04=58.69)

Extra Rate for tile (34.04)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours,shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shade complete. (86.19+86.19=172.38)

Extra Rate for tile

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. (2.93+2.93=5.86)

Extra Rate for tile

Water Coller & Air Conditioning Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 60 120 G, cooling capacity Ltrs/hr. 60, storage type capacity 120 Ltrs. Including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA/ Voltas – or its equivalent.

Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 40 80 G, cooling capacity Ltrs/hr. 40, storage type capacity 80 Ltrs. including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA / Blue Star / Bajaj – or its equivalent.

Supply & installation of AQUA FLO DX UV Water purification system, capacity 60 ltr. Per hour, 100% chemical free, Dimension 210mm width x 140mm depth x 382mm height, in built voltage stabilizer, Hi Flo, Dual Cartridge including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... EUREKA FORBES – or its equivalent.

Supply & installation of Ultra Violet Filter and Censor system, capacity 120 ltr. Per hour, 100% chemical free, including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... Aquasure – or its equivalent.

Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 5 Star Make:- Carrier, Hitachi, Voltas, Blue Star, Daikin or equitant with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects

Providing laying hard soft copper concealing of copper pipes of various dia as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects .For 2 tonne split AC

Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. uPVC Pipe 10 Kgf/cm2 25mm i/d

Estate Water Supply & Submersible Pump Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5mm depth

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 50mm i/d

Cement concrete 1:6:12, With brick ballast 40mm gauge, mixing by mechanical means using concrete mixer volumetric type, For covering GI Pipe

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. 50mm i/d G.I. Union

Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. 50mm i/d Gun Metal peet valve heavy pattern.

Providing GM ferrule as per IS:2692 drilling and tapping cast iron pipe lines of all diametres and screwing in Ferrule and connections complete in all respect. 25mm i/d Ferrule heavy duty

Submersible Pump Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested ,equipment as requried such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. Boring with 150mm id Housing Pipe Upto 40m depth BGL.

Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – in-charge. 100 mm nominal size dia.

Supplying, assembling, lowering and fixing in vertical position in bore well un-plasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100mm i/d nominal size dia

Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. (100mm i/d)

Providing and installing submersible motor 1 HP alongwith assembly, Electrical control panel including electrical connections complete in all respects.

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Development of Tubewell with Submersible pumping set

Estate Sewerage Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. For Sewer Line GT to IC 6mtr each 110mm

160 mm o/d pipes For Sewer Line IC to IC and IC to MH 6mtr each

Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings, including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects. For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L. For all classes of soil except rocky

Cement concrete 1:6:12, With brick ballast 40mm gauge Mixing by mechanical means using concrete

Constructing brick masonary manhole in cement mortar 1:5 (1 cement 5 coarse sand) RCC Top slab 20 cm thick using M-20 mix by using mixer and vibrator TMT fee 500 @ 80 kg/ per cm foundation concrete 1:4:8 mix (1 cement 4 corase sand 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortaro 1:3 (1 cement 3 coarse sand) finhised with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 finhised with a floating coat of neat cement organge design complet in all respect Inside size 75x120cm and 120cm deep For on sewer line

Extra payable for every 0.30 m additional depth of manhole chamber in item 29.84 upto 1.80 m increase in depth. Inside size 75x120 cm

Extra for making connections of all sizes newly laid sewers within benching of fully charged sewers including pluging of sewer, dewatering & desilting of manholes etc. complete in all respects. with existing sewer of 300 mm id and below

Fire Fighting Equipment Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures specification. ISI Mark Complete in all respect. 4.5kg capacity

Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 6kg Capacity

DISMENTALING OF EXISTING PUMP CHAMBER Stripping and stacking slate or tiles of a roof. From Roof

Earth work excavation in ordinary soil, exclusive of compensation of earth :-- Earth work undressed with a combined lead upto 15 metres including breaking of clods. From Roof

Dismantling brick work tile masonary or tile lining. In cement.

Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below.

Windows of area 3 sqm and below

Dismantling concrete or precast concrete. Reinforced Cement concrete

Disposal of Malba outside the premises loading / unloading including all leads as desired by Engineer in charge .

Credit of Material to be received from dismentling Tile from dismenling of tile terracing

Bricks from dismenling of Brick work

Brick/Tile bats

Credit of Old Steel tobe received from Desmentling of RCC From Dismentling of RCC

Old Doors as fuel wood

Old Window as fuel wood

Electrical Service PROVIDING INTERNAL ELECTRICAL INSTALLATION , RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, uPVC, fire retardant conduit pipe 20mm/25mm dia ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp./16/20Amp. Switches (flush piano type accessories) & covered with brown Bakelite white glazed transfacent backside painted sheet 3mm thick etc, and including the cost of flush piano type switches/sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) uPVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring fan point with sheet metal fan box (shape hexagonal in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts. Construction of Xen office building

Wiring light point in PVC insulated copper conductor single core FR cable (ISI Marked) overall 1.5 sq mm 1100 volts grade

Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade.

Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.

Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.

Wiring call-bell point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:- Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed

Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed

Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed

PVC flexible pipe 40mm o/d

Supply and erection of 20mm dia heavy gauge welded conduct pipe (1.60mm thick)suspension road for ceiling fan complete in all respect decides by Engineer

PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated single core FRLS copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FR cable (ISI marked) overall 2.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FR cable (ISI marked) overall 4 sq.mm, 1100volts grade

PVC insulated copper conductor single core FR cable (ISI Marked) overall 16 sqmm 1100 volts grade

GALVANZED IRON PIPES AND GLEARHING :- Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 8 SWG (4mm dia.) electrolytic copper wire thimbled (with 1 nos. copper thimble) to 30 cm x 60 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.

Supply and Erection of 8 SWG 4mm dia copper wire run through 20mm dia. Heavy guage welded conduit pipe (As additional length). SWITCH DISCONNECTOR FUSE UNIT (With Sheet Enclosure):

Supply and erection of Switch Disconnector fuse unit with HRC Fuses in sheet enclosure on the existing surface (conforms to IS 13947 (PartI&III) complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connection on both sides of switch with sutiable size of Thimbles, including cost of HRC fuses as per PWD General Specifications 63Amp. 415volts three pole & neutral switch disconnector fuse unit with HRC Fuses in sheet enclosure

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's: Supply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc. Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/RCCB's for outgoing 8 way each

Group B Havells, HPL, Abb Standard & other Brand approved Sheet metal plug and socket distribution board single pole MCB and neutral enclosure with a two pin and earth plug socket to incorporate in one single pole MCB 20 amp

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Miniature circuit breaker four pole 50, 63amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. Double walled corrugated (DWC) HDPE pipe 63/ 51mm (outer/ inner dia.)

Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten and Cat. including erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer in-charge at site.

Supply and erection of plastic ventilation fan ventilus 10” (250mm-900RPM) single phase of make Crompton white colour/ Helonix/ Havell’s ventil Air DX white including erection connections at testing etc complete in all respect as approved and desired by the Engineer in-charge at site.

Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all Respect as appd. and desired by the Engineer in-charge at site

S/E Energy saving fan celling fans 1200mm sweep (48”) having two ball bearing but without regulator including flexible wire & petty material etc for connections complete with erection connections and testing etc. complete in all respect

Supply and erection of Wall fan of 400mm sweep (16") High Speed ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and Aluminium louver shutter complete in all respects as appd. and desired by the Engineer in- charge at site.

Supply and erection of Glazed LED Batten High Quality Aluminium Extruded with decorative end caps including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer In-charge at site.

Supply and Erection of Recess mounted white powder coated CRCA housing with Window acrylic diffuser LED Panel 2' x 2' 36 w of including cutting of ceiling, erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site.

Supply and Erection of Neve Plus (Square) LED recess mounte square pannel with aluminium die cast housing and cat of with cut out dimensions of 206 mm x 206 mm incuding cutting of ceiling, erection, connections and testing etc of the same on wall with petty material as required at site complete in all respects as approved & desired by the Enaineer-in-Charge.

Supply & erection of Computer Terminal suitable for Computer Networking with modular accessories one on. metal box 12 module 8" x 6", 3 Nos. Switch 6 Amp, 3 Nos. Socket 3 pin 16 Amp, 1 No. Switch 20 Amp, 1 Nos. Socket 20 Amp and 1 No. Modular Accessories including connections & testing complete in all respect as desired by the Engineer-In-Charge at site.

XLPE/ PVC INSULATED UN-ARMOURED CABLES (LOOSE IN THE EXISTING TRENCH OR PIPE): Supply and laying of XLPE/ P.V.C. insulated P.V.C. sheathed aluminium conductor un-armoured cable working voltage upto and including 1100 volts grade to be laid loose in the existing trench or pipe as per PWD General Specifications 2010:- Aluminum Condutor XLPE/ PVC insulated PVC sheathed aluminium conductor unarmoured cable working voltage 1100volts grade 35sq.mm (3 ½ Core)

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets, power switch and sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc. Bakelite batten holder large size

Sheet Metal cubical pedestal tower structures HT &LT Miscellaneous items S/E of SMC peadestalmade from 50mmx 50mm x 6mm thick MS angle iron frame with 5 sides welded and covered with MS sheet 2mm thick and front side hinged with 4” hinges and locking system with heavy duty 12” sliding door placed on MS stip of sizew 12.5mm x 2.5mm x 2.5mm thick welded with MS sheet complete Cubical size 1200mm high 900mm wideand 350mm deep

LAN (DATA CABLING AND COMPUTER NETWORKING) Supplying erection Testing and commissioning of CAT6 UTP networking cable of 10/100/1000 Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site make D Link/ Digi link complete

Supply & errection of CAT 6 one meter long patrch cord having Rj 45 male connectors on bodh ends DCC up ro 10/100/1000 mbps (Make D link Panduit/)

Supply & errection of CAT 6 one meter long patrch cord having Rj 45 male connectors on bodh ends DCC up ro 10/100/1000 mbps (Make D link Panduit/ complete in all respect as per satisfaction

Supply & errection of CAT 6 information outlet with 3”x3” poly carbonate face plate for termination of networking cable make D Link

Supply and erection of CAT6, 24 port fully loaded patch panel rack mountable for cable termination make D lin/ Panduit/ scheider complete in all respect

Supply and erection of 9 U wall amount 19” rack with glass door, lock & key facility 450mm 550mm depth with cpd cable manager & fan make d link

Supply and erection of 24 port 9 U wall amount 19” rack with glass door lock & key facility 450mm 550mm depth with cpd cable manager and fan make CISCO/ Juniper complete in all respect as per satification of the engineer in charges

Supply and erection of 800 VA LIT sine wave UPS/ Power plant with 2 SMF batteries having 30 minutes backup time. Make APC/ Numeric/ BPE complete in all respect as per satisfaction of the Engineer in charges

Supply and erection of 25mm ISI marked PVC channel on wall surface make AKG/ L&T/ Sanction/ LK/MK complete in all respect as approved and desired by the Engineer in charge at site

Supply and erection of 45mm x 45mm cable management tray siotted gray ccolour ISI marked PVC on wall surface make AKG/L&T/ L.K. MK/ Sanico complete in all respect as approved and desired by the Engineer

PVC HDPE pipes and PVC flexible pipe Supply & erection of PVC pipes and HDPE pipes (fire retardant for wiring purposes including bends inspection boxes etc where necessary inclduign other petty material as per PWD general specification (Heavy gauge PVC conduct p;ipe 25mm dia (ISI Marked) Flushed

EPABX SYSTEM Supply & erection of digital EPBX system 100% non blocking auto attendant, CLI3 pary conference configured for 04 trunk & 12 normal extension 12 VDC power supply adaptor make matrix vision Pro/ Panasonic/ NEC complete in all respect as per satisfaction of the Engineer in Charge

Supply & Erection of 20 pairs MDF + 20 Pair IDF with Krone modules & Lockable box complete in all respect make Krone complete in all respect as per satisfaction of the engineer in charge

Supply & Erection of Basic wired Telephone with display redial CLIP & Mute compatible with EPABX system make Beetel Model :- M51/C51 complete in all respect as per satisfaction Make Beetal/ Panasonic

Supply & Erection of featured wired telephone with blue backlit display redial clip 2 way speaker calculator mute compatible with EPABX system complete in all respect as per satisfaction of the Engineer in charge (Beetal/ Panasonic)

Supply and Erection of 02 Pair 0.5mm PVC dual sheathed telephone cable as per ITD specification with up to amendments compelte in all respect as per satisfaction of the Engiener in charge

Supply & Erection of Rj-II Telephone socket with 3”x3” size polycarbonate face plate complete in all respect make D Lin/ Legrand/ Roma/ Anchor complete in all respect as per satisfaction of the Engineer in charges

Supply and erection of 25mm ISI marked PVC channel on wall surface make AKG/L&T / Sunoco/ LK/MK complete in all respects as approved and desired by the Engineer in charge at site

COPPER EARTHING Earthing of sheet metal/ iron clad switches and metallic cases etc with 8 swg (4mm dia) electrolytic copper wire thimble with 1 Nos copper thimble to 30 cm x 60 cm x 3 mm thick tinned copper plate (made cylindrical buried 10 meter below ground level in the hold excavation having bore dia 125mm and surrondued by salt and charcoal dust mixture (20kg) including fixing the copper wire run through 20mm dia GI pipe on wall and in floor etc complete in all respect

PVC HDPE PIPE & PVC FLEXIBLE PIPES Supply & errection of PVC pipes and HDPE pipes (fire retardant) for wiring purpose including bends inspection boxes etc where necessary including other petty material as per PWD General specifications (Electrical works) Heavy gauge PVC conduit pipe 25mm pipe dia (ISI Marked flushed)

Supply Erection Testing and successful commissioning of diesel generating set 20 KW/ 25 KVA Supply erection testing and commissioning of 25 KVA/ 20 KW diesel Generator set with silent canopy without AMF panel comprsing of 0.8 pwer factor 3 phase 415 V, 50 HZ 1500RPM 42 BHP elecrid start 3 cylinder 4 stroke cycle water cooler turbo charged aspirated complete with flywheel with starter ring for generating set air filter lube oil cooler aspirated complete with fly wheel with starter ring for generating set air filter lube oil cooler assembly with accessories exhaust air manifold exhaust silencer expansion below fuel filter lube oil filter exhaust gas turbocharged after cooled radiator with pusher type fan with fan guard coolant pump 12V electrical starting system with starter motor and battery charging altemrnator fuel injection pump with electronic governor and fuel feed pump engine control panel microprocessor based controller engine mounting supports safeties and indication against low lube oil pressure and high coolant temperature etc K cool super plus corrosion inhibitor coolant for cooling and coupled with 25 KVA alternator engine make Kirlokar/ Cummins/ Greaves and alternator make Stamford/ Kirloskar/ Crompton with sound proof accoustc echo friendly (CPCB-II norms compliance) complete with all accessories. The Generator set should be installed at site on the suitable size plinth for DG sedt as per satisfaction of the Engineer in charge at site. The model of Engine will be decided by the Engineer in charge

XLPE/PVC insulated armored cables (Loose) Supply and laying of aluminum conductor XLPE/PVC insulated armoured and served cable to belaid loose in the existing trench or pipe as per PWD General specifications 2010 Make Finolex/ Havell’s/ RR Kable Aluminum Conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100 volts grade 35sq mm (3 ½ Core)

COPPER EARTHING Earthing of sheet metal/ iron clad switches and metallic cases etc with 8 swg (4mm dia) electrolytic copper wire thimble with 1 Nos copper thimble to 30 cm x 60 cm x 3 mm thick tinned copper plate (made cylindrical buried 10 meter below ground level in the hold excavation having bore dia 125mm and surrondued by salt and charcoal dust mixture (20kg) including fixing the copper wire run through 20mm dia GI pipe on wall and in floor etc complete in all respect

Supply and Erection of 8 SWG 4mm dia copper wire run through 20mm dia Heavy guage welded conduit pipe (As additional length)

Double walled corrugated (DWC) HDPE pipes Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr below ground level including excavation (Making necessary trench) placing the pipe in position and back filling with excavated soil etc. of the required size Double walled corrugated (DWC) HDPE pipe 63/51mm (outer/inner dia)

SHEET METAL IRON CLAD CHANGE OVER SWITCHES:- Supply and erection of sheet metal iron clad switch on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as per PWD General specifications (Electrical works) Sheet metal iron clad four pole changeover switch 63 Amp 415 volts

Providing Campus Lighting/ Security Light 3. Stepped steel tubular Pole:- Supply and erection of 3- stepped steel tubular swaged and welded pole of suitable length conforming to I.S. 2713-1969 (Part 1 to III)/ 1980 and I.S. 1161-1979 (UTS 42 Kgf/ mm sq) to fixed upto a required planting depth below ground level in a hole of excavation about 45cm dia and suitable depth to filled in up to 15cm below G/L with 1:2:4 cement concrete mixture and having 1:2:4 cement concrete muff of dia 450mm, 80cm long above ground level sufficient to completely flush a MCB distribution board SPN 4 way ( double door) with hinged water tight cover with locking arrangement having one single pole MCB distribution board SPN 4 way (double door) with hinged water tight cover with locking arrangement having one single pole MCB of required capacity fixed on din bar. The outer surface of the plinth to be finished with pure cement including painting of pole with two coats of approved aluminum pain as required Overall length 7mtr with planting depth 1.25 mtr length of sections 4 mtr 1.5 mtr and 1.5 mtr (Bottom middle and top respectively) outer dia and thickness of sections 114.3 mm x 4.50mm 88.9mm x 4.05mm and 76.10mm x 3.25mm (Bottom middle and top respectively) with approximate weight 73 kg

GI pipe Brackets for 3 stepped steel tubular poles Supply and erection of G.I. pipe 50mm dia (Medium) single arm bracket 1.5 mtr long each arm welded with MS canopy 80mm inner dia outer dia 89.5mm (medium) 450 long suitable for 3 stepped steel tubular swaged and swaged and welded pole with top outer section dia 76.10mm. The MS canopy should have 3 no holes for fixing the bracket at the top end of the pole with the help of 3 Nos ½” x 1 ½” size nut bolt of full thread. The bracket should have MS round sheet 3mm thick 90mm dia, and 50mm long 1.62mm thick for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angle 105 (105 degree) inclination with MS sheet 5mm thick triangular in shape having dimensions 225mm x 150mm x 5mm thick with two coats of an approved aluminium paint as desired by Engineer in charge at site.

Supply, erection LED street light 45w in aluminium pressure die cast housing with touched glass cover of make jaquar item code LSR T 0150 45xC or its equaling make and cat Philips halonix including erection of the same with the existing bracket fixed with pole, connections and testing etc complete in all respect

Supply, erection testing commissioning of LED post lantern fitting 40 watt with IP 65 having made of aluminum die cast base top fitted with LED’s are directly inbuilt extracted aluminum head sinks. It has UV established injection molded poly carbonate diffuser for glare face light output of Bajaj make cat No BGCT 40W or its equivalent make and cat of Philips / wipro/ Halonix including erection of the same with existing poles/ Gate pillars connection and testing etc complete in all respect as approved engineer in charges at site.

XLPE/PVC Insulated un armoured cables (loose) Supply and laying of aluminum conductor XLPE/ PVC insulated un armoured and served cable to be laid loose in the existing trench or pipe as per PWD General specidications 2010 Make ECKO/ Havell’s / Polycab/ RR Kable/ Finolex/ KEI/ Alcon/ Ralison Aluminum conductor XLPE/ PVC insulated PVC sheathed un armoured and served cable working voltage volts 1100 volts grade 10 sq mm (2 core)

Double walled corrugated (DWC) HDPE pipes Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr below ground level including excavation (making necessary trench) placing the pipe in position and back filling with excavated soil etc of the required size Make:- Narmadal/ Duraline/ Amtel Double walled corrugated (DFC) HDPE pipe 50/38mm (outer/ inner dia)

Supply and Erection of earth rod 20mm dia for providing earth connections upto line earth with G.I. wire No 8 SWG. The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flattened side for facilitating connection with GI wire and thimble etc. The road shall be grouted upto complete length vertically. GI Earth rod 20mm dia 3mtr long

PVC Insulated single core fr copper conductor cable Make : Finolex/ Polycab/ RR Kabel/ Havells/ Kunth Cab/ V Guard Supply and erection of PVC insulated single core FR copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq mm1100 volts grade

SHEET METAL IRON CLAD SWITCHES Supply and erection of sheet metal iron clad switch on existing surface with G.I. bolts and nuts rag bolts and nuts etc according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as per PWD General specifications (Electrical works) Sheet metal iron clad double pole switch 32 amp 415 volts

Security Lighting Supply and eerection of LED flood light 30w with high pressure die cast housing (IP 65 Protected) of make jaguar item code LFLD02S0 30xC or its equivalent make & cat Philips/ wipro/ Halonix. The fitting will be mounting with the help of necessary arraignment for installation on the top parapet of the building including connections, testing & commissioning etc complete in all respect as per satisfaction and desired by the Engineer in charge at site

XLPE/PVC Insulated Un armoured cables (on surface) Supply and laying of XLPE/ PVC insulated PVC sheathed aluminum conductor un armoured cable working voltage upto and including 1100 volts grade (on surface) as per Make Polycab Havells KEI XLPE/ PVC insulated PVC sheathed aluminum conductor unarmoured cable working voltage 1100 volts grade 6 sqm (Three core)

ENVIRONMENT PROVISION EnvironmentalCharges Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50m and lift upto 1.5 m in all kinds of soil.

Planting seedlings including digging of beds to 15cm depth and mixing FYM fertilizer and insecticides planting of seedlings at 20cm distance from plant to plant and row to row.

Planting ground covers (ordinary) including digging of beds to 15cm depth and mixing FYM fertilizer and insecticides planting of sapling at 25cm distance from plant to plant and row to row.

Supplying and planting permanent trees in prepared pits and watering.

Provision for one way stand post with Khura complete in all respects