Rough Cost estimate for the work Construction of Building of Govt. College Mokhra Rohtak (Pdg. EPABX / LAN System only).

Amount

NS Items

S/E of PVC conduit pipe 25mm dia ISI marked (Medium) on surface including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. (Based on HSR 23.7.6.2)

S/E/T/C 12 U rack including power distribution kit complete in all respect HCL/RACKOM/ PRESIDENT make with 2 fan.

S/E/T/C 22 U rack including power distribution kit, cable Manager complete in all respect. Make D-Link/HCL / Comrack

S/E/T/C of 24 port Cat-6 jack patch panel complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work AMP/D-link/ Panduit/ Lucent make.

S/E/T/C of 6 Core optical fibre cable with GI Wire for support, it is an assembly similar to an electrical cable, but containing one or more optical fibers that are used to carry light. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable will be deployed. Make:- Reliance/Syrotech/Molex/ Beldon

S/E/T/C of Cable manager complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work AMP/D-link/ Panduit/ Lucent make.

S/E/T/C of Face plate (Single / Dual) complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work AMP/ D-link/ Lucent make.

S/E/T/C of Face plate (Single / Dual) complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work. Make AMP/Dlink/ Anchor/ Schneider

S/E/T/C of Layer 3/ 2 plus Manageable Gigabit Switch With SFP Module with the features of Switch with at least 24 X 10/100/1000BASE-T Ports and 2 x 10G Base-T and 4 X SFP plus Ports. Switch should have console port , RJ-45 port for out-of band-management port for accessing the CLI of the switch and USB port for connecting a USB storage device. Switching capacity should be 168 Gbps or higher or non-blocking architecture. Switch shall have 64 Bytes packet forwarding rate should be 125 Mpps or higher. Switch MAC table should be at least 16K or higher. Switch should be standard 19 inch 1U rack mountable. Switch should Support Internal/External Redundant Power Supply. Switch should support Physical Stacking up to 9 units per stack. Stacking bandwidth should be up to 80G and up to 32 devices per virtual stack. Operating temperature should be 0 to 50 °C. Switch should be EMI Certificates FCC, CE and Safety Certifications cUL/UL, CB. Switch Software Specification Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol and ERPS as per standard ITU-T G.8032 to provide protection for Ethernet traffic in ring topology: Should support BPDU Filter, BPDU restriction, Root restrction: Should support Loopback detection (LBD) to detect the loop created by a specific port: Should support IGMP Snooping v1/V2/V3 and IGMP groups 1K or more IGMP groups and require support for IGMP

Snooping Fast Leave. Should support MLD Snooping v1/v2 and MLD group 1K or more and require support for MLD Snooping Querier. Should support 16 L3 IP interfaces and IPv4/IPv6 Loopback interface: Should support IPv6 Neighbor Discovery (ND): Should support VRRPv3, Equal-Cost Multi-Path (ECMP) and UDP helper: Should support Static route for both IPv4 and IPv6, OSPFv1, v2 and v3, RIP V1/V2/ng: Should have Policy-based Route (PBR): Switch should support IEEE 802.1Q VLAN with different type of VLAN like Port based, Voice VLAN, Private, Double (Q-In-Q), Multicast VLAN (ISM VLAN for IPv4/IPv6), 802.1v Protocol VLAN ,VLAN Trunking, Super VLAN: should have per-port broadcast, multicast, and unicast storm control to prevents faulty end stations from degrading overall systems performance: Should support port security to secures the access port based on MAC address: Require prevention of DoS attacks, which include Land, Blat, TCP Null Scan, TCP Xmas Scan, TCP SYNFIN, Ping of Death Attack and TCP Tiny Fragment attack: Should support DHCP snooping and DHCP server screening, DHCP server: Should support 802.1X port based and 802.1X host based access control,Identity-driven Policy (VLAN, ACL or QoS) Assignment: Should support RADIUS and TACACS plus authentication.

Should support Authentication database failover. Switch should support QoS (quality of service) IEEE 802.1P for traffic prioritization. It should support 8 queues per port. Different type of QoS priority like Strict Priority Queue and Weighted Round Robin, Strict plus WRR, Congestion control using Weighted Random Early Detection (WRED) or WTD Should support Remark 802.1p priority, Remark ToS/DSCP and Rate limiting in Policy map.: Support at least 2K ingress and 512 egress access control entries. ACL based on MAC, IPv4 and IPv6, TCP/UDP port number, User-defined packet contentm, CPU Interface Filtering: Able to manage trough Web-GUI, Fully functional CLI interface and Telnet: Should have multiple Image and configuration support to reduced down time for the switches. Should support sFlow for monitoring traffic in data networks, SNMP v1, v2c, v3 and SNMP Traps and RMON. Support for DHCP Client support for IPv4/IPv6, DHCP server, DHCP Relay and DNS client. Should have SNTP/NTP protocol for time synchronization. Should support CDP/UDLD, Link Layer Discovery Protocol (LLDP) and LLDP-MED. Make:- Cisco/D-Link/Juniper/Extreme

S/E/T/C of OFC Termination Box with patch cord splicing, media convertors on both ends and ofc core actication complete as per specification up to the entire satisfaction of Engineer-in-Charge of the work AMP/D-link/ Panduit/ Lucent make.

S/E/T/C of optical fibre patch cord Easy-to-use clips for easier polarity management Size: 2 mtr.

S/E/T/C of PVC Industrial Channel 45mm*45mm Size complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work DLINK / AMP/SGI/ Digilink make.

S/E/T/C of single phase 240 volt AC 1 KVA online UPS with batteries back for 1 hour APC / Luminious/Libert/ Microtek make.

S/E/T/C of single phase 240 Volt AC 2 KVA online UPS with batteries. Make: APC/ Libert/Microtek

S/E/T/C of Telephone in/out connector complete in all respect upto entire satisfaction of the work. Make: Dlink/AMP

S/E/T/C of UTP Cat-6 cable in existing pipe / channel complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work AMP / D-link/ Schnieder make.

S/E/T/C of UTP Cat-6 information outlet complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work AMP/ D-link/ Lucent make.

S/E/T/C of UTP Cat-6 Mounting Patch Cords of 3 Ft. length complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work AMP/I-Ball/ Dlink make.

S/E/T/C of UTP Cat-6 Mounting Patch Cords of 5 ft. length complete in all respect up to the entire satisfaction of Engineer-in-Charge of the work AMP/I-Ball/ Dlink make.

SITC of Layer 2 PoE, Gigabit Switch Hardware Specifications:- Switch with at least 24 X 10/100/1000 Mbps Ports and 4 x 10G SFP plus Ports: Switch Shall Have RJ-45 Console Port: Switching capacity should be 128Gbps or higher or non-blocking architecture: Switch packet forwarding rate should be 95.24 Mpps or higher or non-blocking architecture. Switch MAC table should be at least 16K or higher. Switch should be standard 19 inch 1U rack mountable. Support for the Energy Efficient Ethernet (IEEE 802.3az) standard. Power input should be 100 to 240 VAC, 50/60 Hz, internal power supply. Power Saving (Green), Operating temperature should be -5 degree celsius to plus 50 degree celsius. MTBF: 743,482.45 hours, Certification: CE, FCC, BSMI, RoHS and cUL. Switch Software Specifications:- Should support Head of Line blocking prevention for lower latency and better performance. Support Jumbo Frame up to 12K Bytes or higher. Should support IGMP Snooping, Able to create 250 or more IGMP groups and require support for IGMP Snooping Fast Leave, IGMP Snooping Querier. Should support MLD Snooping, Able to create 250 or more MLD groups, Per VLAN MLD Snooping and require support for MLD Snooping Fast Leave.

Link Aggregation LACP 802.3ad: Minimum 8 groups per device and 8 ports per group. Port Mirroring : One-to- One / Many-to-One. Switch Should Support Access Control List based on (ACL`s) 802.1p priority, VLAN, MAC address, Ether type, IP address, DSCP, Protocol type, TCP/UDP port number, IPv6 Traffic Class, Max. ACL Profiles / Rules: 50 / 768. Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol. Should support Spanning tree Root restriction. Should support Loopback detection (LBD) to detect the loop created by a specific port. Should support Multicast Filtering to filters or forward all unregistered groups. Switch should support IEEE 802.1Q VLAN tagging for Ethernet frames. Different type of VLAN like Port based, Auto Surveillance, Auto Voice, Asymmetric Vlan etc. should be available for configuration. Switch should support QoS (quality of service) IEEE 802.1P for traffic prioritization. It should support 8 queues per port. Different type of QoS priority like Strict Priority Queue and Weighted Round Robin. Port based ingress / egress rate limit function should be available with limit in increments as low as 16 Kbps: Switch should support Neighbor Discovery (ND) protocol for IPv6. Switch should support to create atleast 4 IP interface. Should support default routing and static routing with minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries. Support at least 700 rules shared by

IPv4, MAC, and IPv6 and Each rule can only be associated with a single port. Should support port security to secures the access port based on MAC address. should have broadcast, multicast, and unicast storm control to prevents faulty end stations from degrading overall systems performance. Support Traffic Segmentation to restricted traffic flow from a single or group of ports, to a another group of ports. Should have SSH and SSL for IPv4 and IPv6. Require prevention of DoS attacks, which include Land, Blat, TCP Null Scan, TCP Xmas Scan and TCP SYNFIN. Should support 802.1X port based authentication. Should support ARP spoofing prevention. Should support DHCP snooping and DHCP server screening. Switch should able to create a binding table for IP plus MAC plus Port to prevents a malicious user from spoofing or to restrict the unauthorized users. Should support 802.1X RADIUS and local server database authentication. Should have option to check the status of copper cables using the cable-diagnostics time domain reflectometer (TDR).

Able to manage trough Web-GUI, CLI, Telnet and SNMP. Should support SNMP v1, v2c, v3 and SNMP Traps and Remote Monitoring (RMON). Should have dual Image support to reduced down time for the switches. Switch should support dynamic host configuration protocol (DHCP) auto configuration of multiple switches through a boot server eases switch deployment. Should have SNTP/NTP protocol for time synchronization. Switch should be IPv6 Ready Compliance. Should support Link Layer Discovery Protocol (LLDP) and LLDP-MED. Make:- Cisco/DLink/ Juniper/Extreme

Supply and erection of 20 Pair IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilities.

Supply and erection of 50 Pair IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilities.

Supply, Erection, testing and commissioning of 16 Digit LCD Display Push Button with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. Make:Panasonic/Beetel/Avaya

Supply, Erection, testing and commissioning of IP Based EPABX System with following Configurations:- Configure 32 Analogue Extensions expandable upto 96 ports, Configure 4 Analogue SIP Trunk lines, Remote Maintenance Facility and 1 Call Accounting Software, Operator Console 1, Compatible Core IP Switch, System should Support ISDN PRI. Make:- Matrix/Coral/Avaya

Supply, Erection, testing and commissioning of Operator Console/IP PHONE with the features of Wide graphical LCD Display, Socket for Hand set, Minimum 16 Programmable Key, Soft key, personal Key with LED status indication navigator keys dial by name facility for director dialing IP Phone. Make Matrix/Coral/Avaya

Supply, Installation, Testing and Commissioning of IP phones with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer- in- charge of work. Make:Yealink/Coral/Matrix

Prime Computers