Construction of Main Drain, Town Hall, Extension of central community centre cum Eco retreat park with water harvesting centre at Balangir, Odisha

SL NO ITEMS OF WORKS AMOUNT

Coonstruction Of extension of central community center cum Eco

A Retreat park with Water Harversting Center at Bijakhaman, Balangir 1,78,70,156.78

Construction of Main drain From Women's College Chhak towards

Joggers Park via Sub-Collector office culvert, Balangir

C Re-Construction of Town-Hall, Balangir Municipality. 1,51,75,938.02

PRIME COST PUT TO TENDER 4,03,07,092.91

Digitally signed by Rakesh

Coonstruction Of extension of central community center cum Eco Retreat park with Water Harversting Center

at Bijakhaman, Balangir

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

1 Earthwork in excavation in all types of soil for site leveling,

foundation, pits, trenches and other civil works up to and

including 1.5 metre lift and stacking the soil upto a lead of

100 metre and including dewatering, removing

slush,shoring and strutting (as required), complete as per

specification and as directed by the Engineer-In-Charge.

All type of Soil 0.00 0.00

2 Filling at all depth with available excavated earth

(excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 15cm in depth: consolidating Cum 127.30 169.29 21550.70

each deposited layer by ramming and watering complete

(lead upto 100m) as directed by the Engineer-In-charge.

3 Supplying of filling sand in foundation and over areas

including watering,ramming, consolidating and dressing, Cum 20.84 403.21 8402.01

labours, tools, taxes etc. all complete as per the

specification and direction of E.I.C.

4 Providing and laying plain cement concrete 1:4:8 (1

cement: 4 sand: 8 stone aggregate 40mm nominal size)

as levelling course in foundation and plinth etc. including Cum 17.69 4718.25 83475.34

tempering, curring ,shuttering etc. complete all depth and

Brick work with Fly ash Bricks in cement mortar (1:6) in

Foundation & Plinth having crushing strength not less than 0.00 0.00

75.00 kg/cm2 immerging the bricks in water not less than

six hours before use in masonary.

5 Peripherial Wall Cum 39.19 4808.80 188444.91

Brick work with Fly Ash Bricks in cement mortar (1:6) in

superstructure having crushing strength not less than 0.00 0.00

75.00 kg/cm2 immerging the bricks in water not less than

six hours before use in masonary .

6 Peripherial Wall Cum 57.00 4854.04 276680.06

7 Providing, lifting, hoisting and laying Reinforced cement

concrete of M-250 grade as per approved designs and

drawings having a minimum compressive strength (in work

test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days

after mixing and test conducted in accordance with I.S.

516 using 12 mm. to 20 mm. size black hard crushed

broken granite stone chips and screened and washed sharp

sand for mortar of approved quality from approved quarry,

washed and cleaned ( 20mm. size chips not to exceeds 25

% ) to be mixed in concrete mixture with Portland slag

cement (PSC) including hoisting, lowering, laying and

compaction concrete by using vibrators, watering and 0.00 0.00

curing for 28 days, centering and shuttering then after

dismantling and removing debris from the work site and

finishing the exposed surface smooth providing grooves or

beads wherever necessary including cost, conveyance,

loading, unloading, royalties and taxes of all materials and

cost of all labours, sundries, T & P required of the work etc.

complete in all respect as directed by the Engineer-in-

Charge. But excluding cost and conveyance of M.S. rods or

Tor steel and binding wires and labour charges for

straightening, cutting, bending etc. of M.S. rods or tor steel

tying the grills and placing in proper position.

b) Column up to plinth- Cum 5.62 12766.06 71694.18

d) Column up to Top Cum 11.70 12766.06 149362.87

Supplying, straightening, cutting, bending, placing in

position and binding reinforcement steel work in

RCC/reinforced brick works as per drawing and

8 specification including preparation of respective bar Qntl 394.12 9958.49 3924867.54

bending schedule and binding ( Binding wire to be used as

per the IS code) etc. all complete as per direction of

Engineer-In-Charge Cold Twisted bars, Thermo-

Mechanically -treated bars.

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

12mm cement plaster on external RCC/brick surfaces in

cement plaster 1:6 (1 cement : 6 coarse sand) including

9 necessary scaffolding, curing etc. all complete at all floors Sqm 892.16 235.01 209663.03

and all heights as directed by the Engineer-In-Charge.

Providing & applying priming coat with Cement primer of

10 approved brand and manufacture on plaster surface as per Sqm 892.16 71.25 63564.97

the instruction of Engineer-In-Charge at all elevations

including all material & labour complete.

Providing and applying to outside walls with Weather Coat

paint two coats including scaffolding and cleaning the

11 surface before application, as per specification, instruction Sqm 802.94 73.69 59169.75

of Engineer-In-Charge at all elevations including all

material labour complete.

Providing and applying to outside walls with textured

exterior paint of required shade as approved by EIC

B LANDSCAPE & HORTICULTURE WORK 0.00 0.00

Trenching in ordinary soil up to a depth of 60 cm including

removal and stacking of serviceable materials and then

disposing of surplus soil, by spreading and neatly leveling

1 within a lead of 50 m and making up the trenched area to cum 480.00 44.49 21353.28

proper levels by filling with earth or earth mixed with

sludge or / and manure before and after flooding trench

Supplying and stacking of good earth at site including

royalty and carriage upto 5 km complete

Supplying and stacking sludge at site including royalty and

carriage upto 5 km complete

Supplying and stacking at site dump manure from

approved source, including carriage upto 1 km complete

(manure measured in stacks will be reduced by 8% for

i Screened through sieve of I.S. designation 20 mm cum 9.60 245.24 2354.33

ii Screened through sieve of I.S. designation 16 mm cum 7.68 265.87 2041.87

Rough dressing the trenched ground including breaking

Uprooting weeds from the trenched area after 10 to 15

6 days of its flooding with water including disposal of sqm 800.00 2.80 2237.03

uprooted vegetation.

7 Fine dressing of the ground. sqm 800.00 2.10 1680.94

Spreading of sludge, dump manure and/or good earth in

required thickness as per direction of officer-in-charge

(cost of sludge, dump manure and/ or good earth to be

paid separately).

Mixing earth and sludge or manure in the required

proportion specified or directed by the Officer-in-charge

Grassing with selection No. 1 grass including watering and

maintenance of the lawn for 60 days or more till the grass

10 forms a thick lawn, free from weeds and fit for mowing 0.00 0.00

including supplying good earth, if needed (the grass and

earth shall be paid for separately).

i In rows 5 cm apart in both directions sqm 800.00 72.38 57900.18

Preparation of mounds of various size and shape by

available excavated / supplied earth in layers not

11 exceeding 20 cm in depth, breaking clods, watering of each cum 150.00 255.82 38373.60

layer, dressing etc., lead upto 50 meter and lift upto 1.5 m

complete as per direction of Officer-in-charge.

Digging holes in ordinary soil and refilling the same with

the excavated earth mixed with manure or sludge in the

ratio of 2:1 by volume (2 parts of stacked volume of earth

after reduction by 20% : 1 part of stacked volume of

manure after reduction by 8%) flooding with water,

dressing including removal of rubbish and surplus earth, if

any, with all leads and lifts (cost of manure, sludge or

extra good earth if needed to be paid for separately) :

i Holes 90 cm dia, and 90 cm deep Each 100.00 153.87 15387.20

ii Holes 60 cm dia, and 60 cm deep Each 50.00 47.14 2357.05

iii Holes 45 cm dia, and 45 cm deep. Each 50.00 20.18 1008.90

Plantation of Trees, Shrubs, and Hedge at site i/c watering

13 and removal of unserveiceable material’s as per direction 0.00 0.00

of officer in charge (excluding cast of plant & water)

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

i Trees Plant Each 10.00 7.55 75.52

ii Shrubs Plant Each 50.00 3.78 188.80

iii Hedge Plant Each 100.00 2.54 253.70

Providing & fixing of River Pabbles size of 2" to 2.50" dia in

19 natural colour. at site of work including loading, unloading, Qtl 400.00 699.80 279919.60

carriage etc.and as per direction of officer in charge.

Supply and stacking of Alstonia scholaris plant of height

20 150-165 cm. in bag of size 25 cm as per direction of the Each 10.00 76.70 767.00

officer-in-charge.

Supply and stacking of Bauhinia purpurea (Kachnar) plant

21 of height 150- 165 cm. in big poly bags of size 25 cm as Each 10.00 94.40 944.00

per direction of the officer-in-charge.

Supply and stacking of Bottle palm plant of ht. 150-180 cm

22 bottom girth 20-25 cm well developed in big poly bags of Each 30.00 212.40 6372.00

size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Callistemon lanceolatus plant of

23 height 150-165 cm. in big poly bags of size 25 cm as per Each 30.00 76.70 2301.00

direction of the officer-in-charge.

Supply and stacking of Foxtail palm plant of ht. 120-150

27 cm bottom girth 15-20 cm well developed in big poly bags Each 50.00 271.40 13570.00

of size 25 cm as per direction of the officer-in-charge.

Supply and stacking of Grevillea robusta (Silver Oak) plant

28 of height 150- 165 cm. in big poly bags of size 25 cm as Each 20.00 59.00 1180.00

per direction of the officer-incharge.

Supply and stacking of Phoenix sylvestris Roxb. (Wild date

29 palm/khajur) of height 150-165 cm. in Big HDPE Bag as Each 20.00 767.00 15340.00

per direction of the officer-incharge.

II SHRUBS 0.00 0.00

Providing and displaying of Areca Palm plant, having ht. 90

cm to 1.20 m with 4 to 5 suckers, well developed, fresh

1 and healthy with lush green foliage in 20 cm size of Each 20.00 186.26 3725.26

Earthen pot / Plastic pot & as per direction of the officer-in-

Providing and Displaying Acalypha Different colour well

developed, fresh & healthy with good foliage, multi branch

30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot

bushy plant as per direction of the officer-in-charge.

Providing and Displaying Bismarckia Palm 115 to 180 cm

ht., well developed 12 and above good color fresh and

healthy leaves in 40 cm Cement Pot as per direction of the

officer-incharge.

Supply and stacking of plant Tabernaemontana coronaria

(chandni variegated) of height 45-60 cm. with 3-4

branches earthen pots of size 20 cm as per direction of the

officer-in-charge.

Supply and stacking of Jasminum humile (Yellow) plant of

21 height 30 cm to 45 cm. in 20 cm size of Earthen pots / Each 30.00 35.40 1062.00

Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Bougainvillea (Variety Butiana, Lady

Mary Baring,Mahara,Mohan,Scarlet Queen, Varigata,

Glabra Formosa, Peruviana Odissi, Partha,Subhra,Thimma,

22 Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to Each 20.00 47.20 944.00

45 cm. with 2-3 branches in 20 cm size of Earthen pots /

Plastic pots & as per direction of the officer-incharge.

IV CLIMBERS 0.00 0.00

Supply and stacking of Bignonia venusta (Golden shower)

plant of height 30 cm to 45 cm. in 20 cm size of Earthen

pots / Plastic pots & as per direction of the officer-in-

Supply and stacking of Clerodendrum splendens plant of

2 height 30 cm to 45 cm. in 20 cm size of Earthen pots / Each 120.00 35.40 4248.00

Plastic pots & as per direction of the officer-in-charge.

Supply and stacking of Petrea volubilis plant of height 30

3 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & Each 80.00 56.64 4531.20

as per direction of the officer-in-charge.

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Supply and stacking of Quisqualis indica plant of height 30

4 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & Each 80.00 29.50 2360.00

as per direction of the officer-in-charge.

Supply and stacking of Ipomea purpurea (Morning glory)

plant of height30 cm to 45 cm. in 20 cm size of Earthen

pots / Plastic pots & as per direction of the officer-in-

Supply and stacking of Vernonia elaegnifolia (curtain

creeper) plant of height 30 cm to 45 cm.in 20 cm size of

Earthen pots / Plastic pots & as per direction of the officer-

V GROUND COVERS PLANTS 0.00 0.00

Providing and Displaying of Alternanthera species plant of

height 15 cm to 20 cm, full of branches and foliage in 15

cm size of Earthen Pot / Plastic Pot & as per direction of the

officer-in-charge.

Providing and Displaying of Asparagus sprengeri plant of

height 30 cm to 45 cm, full of leafy branches in 20 cm size

of Earthen Pot / Plastic Pot & as per direction of the officer-

Providing and Displaying of of Cuphea chinensis plant of ht.

30-45 cm full of branches and healthy foliage in 25 cm size

of Earthen Pot / Plastic Pot & as per direction of the officer-

Providing and Displaying of Dianella variegated plant, with

4 3 to 4 variegated leaves in 20 cm size of Earthen Pot / Each 750.00 36.29 27213.75

Plastic Pot & as per direction of the officer-in-charge.

Providing and Displaying of Duranta Golden plant, having

ht.15 to 20 cm bushty shape plant with fresh and healthy

leaves in 20 cm size of Earthen Pot / Plastic Pot & as per

direction of the officer-in-charge..

Providing and Displaying of Ipomea (Golden leaves)

plant,with fresh and healthy leaves in 15 cm size of

Earthen Pot / Plastic Pot & as per direction of the officer-in-

VI SHADE LOVING PLANTS 0.00 0.00

Providing and displaying of Dracaena warneckii having ht.

30 cm to 45 cm. with good colour foliage, well developed,

fresh and healthy in 20 cm size of Earthen pot/Plastic pot &

as per direction of the officer-in-charge.

Providing and displaying of Money Plant Broad Leaves

mounted on moss stick 90 cm ht., 3 to 4 plants in each

pot, well developed with full of fresh & healthy leaves in

2 size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Each 300.00 217.71 65313.00

Perpendicular height Earthen pot / Plastic pot . & as per

of the officer-in-charge.

Providing and displaying of Schefflera high colour plant,

having ht. 25 cm to 30 cm, well developed with fresh &

healthy foliage in 25 cm size of Earthen pot/Plastic pot & as

per direction of the officer-in-charge.

Providing and displaying of Syngonium golden plant,

mounted on moss stick 90 cm ht., 3 to 4 plants placed in

4 each pot at equal distance, well developed with full of fresh Each 300.00 228.63 68587.50

& healthy leaves from bottom to top in 25 cm size of

Earthen pot / Plastic pot & as per direction of the officer-in-

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Manufacturing, supplying and fixing retro reflective sign

boards madeup of 2 mm thick aluminium sheet, face to be

fully covered with highintensity encapsulated type heat

activated retro reflective sheetingconforming to type - IV of

ASTM-D 4956-01 in blue and silver white orother colour

combination including subject matter, message (bilingual),

symbols and borders etc. as per IRC ; 67:2001, pasted on

substrate by an adhesive backing which shall be activated

by applyingheat and pressure conforming to class -2 of

ASTM-D-4956-01 andfixing the same with suitable sized

aluminium alloy rivets @ 20 cmc/c to back support frame

of M.S. angle iron of size 25x25x3 mmalong with theft

5 resistant measures, mounted and fixed with 2 Nos.M.S. 0.00 0.00

angles of size 35x35x5 mm to a vertical post made up to

M.S.Tee section ISMT 50x50x6 mm welded with base plate

of size100x100x5 mm at the bottom end and including

making holes inpipes, angles flats, providing & fixing M.S.

message plate of required size, steel work to be painted

with two or more coats of synthetic

enamel paint of required shade and of approved brand &

manufactureover priming coat of zinc chromate yellow

primer (vertical MS-Teesupport to be painted in black and

white colours).Backside ofaluminium sheet to be painted

with two or more coats of epoxy paint over and including

appropriate priming coat including all leads and lifts etc.

complete as per drawing, specification and direction of

Mandatory/ Regulatory sign boards of 900 mm diametre

with support length of 3750 mm

Cautionary /warning sign boards of equilateral triangular

b shape having each side of 900 mm with support length of each 30.00 4087.58 122627.37

Manufacturing, supplying and fixing retro reflective

overhead signage boards made up of 2 mm thick

aluminium sheet, face to be fully covered with high

intensity and encapsulated lens type heat activated retro

reflective sheeting conforming to type - III of ASTM-D-

4956-01 as approved by Engineer-in-charge, letters,

borders etc. as per IRC : 67-2001 in silver white with blue

colour back ground and with high intensity grade, pasted

on substrate by pressure sensitive adhesive

backing which shall be activated by applying pressure

conforming to class II of ASTM-D-4956-01 and fixing the

same to the plate of structural frame work by means of

6 suitable sized aluminium alloys, rivets or bolts & nuts @ 0.00 0.00

300 mm centre to centre all along the periphery as well as

in two vertical rows along with theft resistant measures,

including the cost of painting with two or more coats of

epoxy paint in grey colour on the back side of aluminium

sheet including appropriate priming coat. The rate includes

rounding off the corners, lowering down the structural

frame work from the gantry, fixing and erecting the same

in position all complete as per drawings, specification and

direction of the engineer-incharge.(Structural frame work

including M.S. plate to be provided separately. Rectangular

area of the sheet only shall be measured for payment).

a Overhead informatory road signage sqm 60.00 5572.20 334331.76

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Providing Retro-reflective regulatory sign board of size 900

mm dia meter made out of 2 mm thick aluminium sheet,

face to be fully covered with high intensity encapsulated

lens type retro -reflective sheeting as approved by

Engineer-in-charge . Letter, symbols, borders etc. will be

as per IRC - 67 with required colour scheme on the boards

and with the high intensity grade A. The aluminium sheet

to be riveted to M.S. frame of angle iron of size 40x40x4

7 mm. The boards will be fixed to 1 No. 50x50 mm square each 60.00 6214.41 372864.66

post made of M.S. angle 50x50x4 mm, 4 m long welded to

the frame with adequate

anti-theft arrangement .Sheet work to be painted with two

or more coats of synthetic enamel paint over an under coat

(primer) and back side of aluminium sheet to be painted

with two or more coats of epoxy paint including

appropriate priming coat complete in all respects as per

direction of Engineer-in-charge.

POND & PERIPHERAL DEVELOPMENT 0.00 0.00

Earthwork in excavation in all types of soil for site leveling,

foundation, pits, trenches and other civil works upto and

including 2.0metre depth and stacking the soil upto a lead

1 of 100 metre and including dewatering, removing slush, Cum 4842.15 253.94 1229596.58

shoring and strutting (as required), complete as per

specification and as directed by the Engineer-In-Charge.

Supplying and filling in foundation trenches and plinth,

ditches with sand well watered and rammed in layers not

exceeding 23 cm. In depth with all lead and lift including

cost, conveyance, loading, unloading, royalties and taxes

2 of all materials, cost of all labour, sundries, T&P required Cum 1138.40 383.42 436481.17

for the work etc. complete in all respect as directed by the

Engineer-in-Charge. Measurement will be taken on finished

compacted section only).

Filling Foundation and plinth with excavated ordinary soil

R.R. stone masonary in cement mortar (1:6) in foundation

Rough stone dry packing in approns and revetments with

5 hard granite stone (15 cm to 30 cm) etc. all complete. Cum 288.60 1519.01 438387.44

Grouting approns and Revetments with C.C. (1:2:4) using

12 mm size chips

Providing and laying plain cement concrete 1:4:8 ( 1

cement:4 course sand: 8 stone aggregate 40mm) Cum 51.33 4667.84 239587.01

includung all materials and labour complete at all locations

and all height.

Providing and laying P.C.C. (1:3:6) in foundation trench

and below flooring using 40mm down graded chrusher

7 broken HG Metal, including compaction, curing including Cum 16.72 5167.83 86380.34

cost of all materials and labour etc. complete as per

direction of Engineer- In -Charge.

Providing and laying cement concrete 1:2:4 ( 1 cement:2

8 course sand : 4 stone aggregate 12mm nominal size) Cum 5.95 6718.26 39964.40

including all materials andlabour at all floor and all height.

Fly ash brick masonry using Fly ash bricks of size 25cm x

12 cm x 8 cm having crushing strength not less than 75

kg. Per Sqr. Cm. In cement mortar of mix(1:6) with

cement and screened and washed sharp sand for mortar

after immersing the bricks for 6 (six) hours in water before

use in foundation, plinth, basement and for ornamental

flower beds, plinth moulding and similar such type of works

with all necessary projections, splays cutting, circular

moulding, corbelling, chamfering, watering and curing etc.

including cost, conveyance, loading unloading, royalties

and taxes of all materials and cost of all labour, sundries, T

& P required for the works etc. complete in all respect as

directed by the Engineer-in-Charge.

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

R.C.C. work of M20 using 20mm and down graded hard

10 granite crusher broken chipes including 0.00 0.00

laying,hosting,centring & shuttering with all

cost,conveyance of material etc.complete.

I FOUNDATION & PLINTH 0.00 0.00

Footing & Pedestal Cum 8.33 5819.56 48500.21

Column Upto plinth Cum 0.38 13173.91 4940.22

Plinth beam Cum 0.38 6286.98 2357.62

II SUPERSTRUCTURE 0.00 0.00

Column in superstructure Cum 1.61 13173.91 21144.12

Supplying, straightening, cutting, bending, placing in

position and binding reinforcement steel work in

RCC/reinforced brick works as per drawing and

11 specification including preparation of respective bar Qntl. 12.04 11007.03 132524.62

bending schedule and binding ( Binding wire to be used as

per the IS code) etc. all complete as per direction of

Engineer-In-Charge Cold Twisted bars, Thermo-

Mechanically -treated bars.

Fly ash brick masonry using Fly ash bricks of size 25 cm. x

12 cm. x 8 cm. having crushing strength not less than 75

kg. Per Sqr. Cm. in cement mortar of mix (1:6) with

cement after immersing the bricks for 6 (Six) hours in

water before use in superstructure including splays cutting,

12 circular moulding, corbelling, chamfering and similar such Cum 2.76 4931.56 13611.11

type of works, watering and curing etc. including cost,

coveyance, loading and unloading, royalties and taxes of all

materials and cost of all labour, scaffolding, sundries, T&P

required for the works etc. complete in all respect as

directed by the Engineer-in-charge.

12 m.m thick cement plaster in cement mortar of mix

(1:6) in all floors at all height using screened & washed

sharp river sand for mortar with approved quality of

cement, finished smooth to the even surface of the brick

masonry walls after racking out the joints properly

13 ,providing grooves wherever necessary including cost, 0.00 0.00

conveyance, loading, unloading,stacking, royalties and

taxes of all Materials, cost of all Labour, T&P, Sundries ,

Scaffolding, Watering, Curing,Rounding of corners etc.

required for the work complete etc. as directed by the

Engineer- in -charge.

16 m.m thick cement plaster in cement mortar of mix

(1:6) in all floors at all height using screened & washed

sharp river sand for mortar with approved quality of

cement, finished smooth to the rough surface of the brick

masonry walls after racking out the joints properly

14 ,providing grooves wherever necessary including cost, 0.00 0.00

conveyance, loading, unloading,stacking, royalties and

taxes of all Materials, cost of all Labour, T&P, Sundries ,

Scaffolding, Watering, Curing,Rounding of corners etc.

required for the work complete etc. as directed by the

Engineer- in -charge.

6 m.m thick cement plaster in cement mortar of mix (1:4)

in all floors at all height using screened & washed sharp

river sand for mortar with approved quality of cement to

the ceiling of the Roof Slab, Staircase, Beams,

Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and

Shelves etc. including roughening, scraping, chiseling,

cleaning, closed deep chipping with slurry treatment and

finished smooth to all R.C.C. Surface including cost,

conveyance, loading, unloading, royalties ,stacking and

taxes of all Materials, cost of all Labour,Sundries, T&P,

Scaffolding,Watering, Curing etc. complete in all respect as

directed by the Engineer- in- charge

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Painting two coats of plastic emulsion paint with primer &

putty on interior wall surface and applying sand paper to

16 smooth the surface of reputed make including cost of all Sqm 1.61 90.15 144.69

material labour scafolding T&P etc all complete as directed

by engg. on Charge.

Painting two coats of oil bond distemper paint with primer

& putty on interior wall surface and applying sand paper to

17 smooth the surface of reputed make including cost of all Sqm 112.20 82.39 9243.89

material labour scafolding T&P etc all complete as directed

by engg. on Charge.

Providing two coats of weather coat over a coat of Priming

(with water based Exterior Primer)of approved quality and

colour, using the required quantity of paint as specified by

the manufecturer to give all external surface over the

18 finished plaster surface including watering the surface Sqm 340.15 73.69 25065.63

before applying and curing for the required period as

directed by the Engineer-in-charge including cost of all

materials with taxes and transportation, all labour,

scaffolding, sundries, T&P etc. complete.

Providing and fixing glazed ceramic tiles in all walls up to

required height from the floor level of approved make and

shade in dado/ skirting fixed in neat cement slurry after

soaking the tiles in water over the base of 12mm thick

19 cement plaster(1:3) with white cement pointing in joints Sqm 18.00 912.99 16433.81

including, washing and cleaning with oxalic acid etc.

complete including cost of all materials, transportation and

taxes, all labour, sundries, T&P, watering and curing etc.

complete as directed by Engineer -In-Charge.

Providing and laying 60mm thick factory made cement

concrete interlocking paver block of M-30 grade made by

20 block making machine with storng vibratory compaction of 0.00 0.00

approved size, design & shape, laid in required colour and

pattern over and including 50mm thick sand filling.

Providing and laying 22 mm thick precast cement concrete

chequered tiles on Viw gallary footh path over 20mm thick

21 bed of cement mortar 1:4 complete as per drawing, . 0.00

direction of Engineer-In-Charge and technical specification.

Supplying, fitting and fixing M.S. grill made out of

structural steel, flats, plates, bars, confirming to IS

specification for windows, ventilators etc. as per drawing

and design, fixed to walls with clamps including 1 priming

22 coat with approved metal primer and making good to all kg 1985.56 81.10 161030.65

damages in walls and floors etc. including cost of all

materials, labour, conveyance, taxes, royalties, scaffolding,

sundries, tools and plants, etc., complete as per the

direction of the Engineer-in-charge.

Providing and painting two coats with synthetic enamel

paint of approved quality and approved shade confirmming

to ISI on steel work to give an even shade in all floors at

all height over a coat of primer of approved quality and

23 shade including sand papering and making the surface Sqm 202.91 275.05 55811.10

smooth with cost, coveyance, loading and unloading, and

taxes of all materials, cost of all labour, sundries, T&P,

scaffolding etc. required for the work and complete in all

respect as directed by Engineer-in-charge.

Providing and fixing 16mm thick Kota stone

flooring/skirting (sample of Kota stone should be

approved by Engineer-In-Charge) for stair case trade,

riser and similar locations where ever required in

horizontal/vertical surfaces of required size of approved

shade, colour and texture, with moulding edge etc. laid

over 20mm thick bed of cement mortar 1:4 (1 cement: 4

coarse sand) with joints treated with white cement mixed

with matching pigment, epoxy touch ups including rubbing,

curing, moulding and polishing to give high gloss finish etc.

complete as per direction of Engineer-in-charge at all floors

and all heights.

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Providing and laying flamed finish Granite stone flooring in

required design and patterns, in linear as well as

curvilinear portions of the building all complete as per the

architectural drawings with 18 mm thick stone slab over 20

mm (average) thick base of cement mortar 1:4 (1 cement

: 4 coarse sand) laid and jointed with cement slurry and

pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc.

all complete as specified and as directed by the Engineerin-

Supplying, fitting, fixing of Stainless steel of 304 grade in

hand railing using 50mm dia of 2mm thick circular pipe

with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr.

26 C/C & stainless square pipe bracing of 32mm x 32mm x Kg 649.35 576.43 374304.82

2mm in 3 rows in stair case as per approved design &

specification, buffing, polishing etc. with cost, conveyance,

taxes of all materials, labour, T&P etc. required etc.

EXTERNAL PH & WATER SUPPLY AND IRRIGATION 0.00 0.00

GPH Works: Supplying all materials, labour, T&P and

providing and fixing to wall or ceiling and floor pvc pipes

confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings

1 of the following nominal borewith clamps including making 0.00 0.00

good the wall, ceiling and floor, testing all complete as per

specification and direction of the Engineer-in-charge.

i) Ground floor 0.00 0.00

15 mm PVC sch-80 pipes Mtr 50.00 186.09 9304.30

20 mm PVC sch-80 pipes Mtr 60.00 205.91 12354.60

25 mm PVC sch-80 pipes Mtr 60.00 238.95 14337.00

32 mm PVC sch-80 pipes Mtr 60.00 299.37 17961.96

40 mm PVC sch-80 pipes Mtr 15.00 356.24 5343.63

supplying all materials, labour, T&P and cutting holes

through existing brick work including making good the

#REF! damages in cement mortar (1:4) for taking G.I. Pipes and 0.00 0.00

fittings/ P.V.C. pipes and fittings etc. all complete as per

P.H. specification and direction of Engineer-in-charge. 250

i) Ground Floor Each 80.00 62.54 5003.20

Supplying all materials, labour, T&P and cutting hole in

R.C.C floors, roofs, etc upto 19 cm thick for passing G.I.

Pipes / P.V.C pipes and fittings etc and repairing the holes

#REF! after insertion of pipes etc with cement concrete (1:2:4 ) 0.00 0.00

including finishing complete so as to make it leak proof as

per direction of the Engineer-in-charge.

i) Ground Floor Each 40.00 201.90 8075.92

Supplying all materials, labour, T&P and cutting grooves in

#REF! pucca floors and walls for taking G.I./P.V.C. pipes and 0.00 0.00

making good the damages as per direction of the E.I.C.

i) Ground Floor Mtr 50.00 214.76 10738.00

Fixing of Brass / Gun meta ball Valve confirming to IS :

e) 781-1995 of approved make as per specification complete 0.00 0.00

as per direction of Er-in-charge.brass or gun metal full way

b) 32mm nominal bore Each 24.00 840.16 20163.84

c) 40mm nominal bore Each 22.00 1568.93 34516.42

d) 50mm nominal bore Each 18.00 2336.40 42055.20

e) 65mm nominal bore Each 10.00 3857.77 38577.74

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Supplying all materials, labour, T&P and fixing Rotational

moulded polyethylene cylindrical vertical water storage

tanks conforming to IS:12701--1996 including cutting

holes through the tank and fixing mild steel ltubes and

fittings and providing extra sockets and jam nuts, fixing

ball valve etc, including hoisting up to a height of 5 meters

above ground level and placing the tank to the required

position and providing 1st class K.B.Brick work in cement

#REF! mortar (1:6) of 0.46mt. height in staging and in circular 0.00 0.00

protection wall to support the tank, 12mm thick cement

plaster (1:6) over brickwork, R.C.C.slab of size

1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of

0.25mt.x0.30mt. and 2.60mt. average length in cement

concrete (1:2:4) using 12mm size h.g.chips including

centering and shuttering, watering, curing, conveyance of

all materials to worksite etc all complete as per

specification and direction of the Engineer-In-Charge.

2000 litre capacity water storage tanks in 1st. floor. Each 4.00 27667.00 110667.99

Supplying all materials, labour, T & P and constructing

Gully trap chamber of the following inside size with 8 cm

thick R.C.C. precast cover slab in CC (1:2:4) mix using

12mm size h.g. chips, foundation concrete (1:4:8) using

40mm size h.g. metal on bed aound trap , Fly Ash

1 brickwork in CM (1:6) in P&F and inside 12mm thick 0.00 0.00

cement plastering (1:3) finished with a floating coat of

neat cement including fixing 100mm x100mm size gully

trap, 150mm x150mm C.I gratig etc. all complete as per

aproved drawing, specification and direction of Engineer-in-

Supplying all materials, labour, T & P and constructing

Inspection chamber of the following inside size with CC

(1:3:6) mix using 40mm size h.g. metal on bed, Ist class

Fly Ash brickwork in CM (1:6) , moulding and shaping the

channel inside and benching with CC (1:2:4) using 12mm

size h.g. chips, 12mm thick cement plastering (1:3)

finished with punning to inside , cement flush pointing

2 (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm 0.00 0.00

size h.g. chips with RCC man hole cover , earth work in

excavation in all kinds of soil and refilling the cavity around

the chamber including watering ,curing, conveyance of all

materials to worksite , payment of royality , taxes etc. all

complete as per aproved drawing , specification and

direction of Engineer-in-charge.

Inside size 760mm x760mm x450mm Each 12.00 8475.35 101704.20

Supplying all materials, labour, T&P and laying in trenches

(to level or slope) unplasticized PVC pipes conforming to

IS: 4985/2000 of the following outside dia for class-

3(0.60mpa) including jointing with supply of approved

solvent cement by non-heat application method/as per

3 manufacturer ’s specification, providing and laying in trench 0.00 0.00

cement concrete (1:4:8) with 40mm size hard granite

metal in the Type C-1 standard bedding surrounding or

encasing including concrete for bedding and curing etc all

complete as per PH specification and direction of the

Engineer-in-charge.

a) 110 mm dia U-PVC pipes Class-3 (0.60 mpa) mtr 140.00 741.98 103877.76

b) 160 mm dia U-PVC pipes Class-3 (0.60 mpa) mtr 80.00 935.39 74830.88

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Supplying all materials, labour, T&P and constructing Man

hole chamber of the following size with cement concrete

(1:3:6) using 40 mm size HG metal on bed , !st class Fly

Ash Brick work in CM (1:6) moulding and shaping the

channel inside and benching with CC (1:2:4) mix using 12

mm size H.G chips, 12 mm thick cement plaster (1:3) with

punning to inside, cement flush pointing (1:3) to outside

,RCC cover slab in (1:2:4) mix using 12 mm size H.G

chips with RCC man hole cover , earth work in all kinds of

soil and refilling the cavity around the camber including

watering, curing, conveyance of all materials to worksite

payment of royalty, taxes etc. all completed as per

approved drawing, specification and direction of Engineer-

a) Inside size 900mmx900mmx900mm each 8.00 22164.41 177315.30

3 EXTERNAL WATER SUPPLY 0.00 0.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings This

3.1 includes jointing of pipes & fittings with one step CPVC 0.00 0.00

solvent cement ,trenching ,refilling & testing of joints

complete as per direction of Engineer in Charge.

External work 0.00 0.00

a) 20 mm nominal dia Pipes Metre 40.00 253.58 10143.28

a) 25 mm nominal dia Pipes Metre 24.00 280.37 6728.83

a) 40 mm nominal dia Pipes Metre 60.00 487.22 29233.32

a) 50 mm nominal dia Pipes Metre 48.00 718.86 34505.09

Constructing masonry Chamber 30x30x50 cm inside, in

brick work in cement mortar 1:4 (1 cement :4 coarse

sand) for stop cock, with C. I. surface box 100x100 x75

mm (inside) with hinged cover fixed in cement concrete

slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

3.7 aggregate 20 mm nominal size), i/c necessary excavation, 0.00 0.00

foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10

graded stone aggregate 40mm nominal size ) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12mm thick, finished with a floating coat of neat

cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of

class designation 7.5

Constructing masonry Chamber 90x90x45 cm inside, in

brick work in cement mortar 1:4 (1 cement : 4 coarse

sand) for sluice valve, with C.I. surface box 100 mm top

diameter, 160 mm bottom diameter and 180 mm deep

(inside) with chained lid and RCC top slab 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size ), i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size ) and inside plastering with

cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete

as per standard design :

With common burnt clay F.P.S.(non modular) bricks of

class designation 7.5

ELECTRICAL WORK 0.00 0.00

Earthing 0.00 0.00

Providing masonary with cover plate having locking

arrangment and watering pipe etc(but with out earthing

with G.I earth plate 600mmx600mmx6mm thick isi marked

including accessories and charcoal and salt) as required

Extra for using salt and charcoal for G.I or copper plate

earth as required

Supplying and laying 25mmx5mm G.I strip on surface or in

recerss for connection etc as required.

Supplying and laying 25mmx5mm Copper strip on surface

or in recerss for connection etc as required.

Providing and fixing 6 SWG G.I wire on surface or in recess

5 for loop earthing along with existing surface/ recessed Mtr 886.00 23.84 21118.70

conduit/submain wiring/cable as required

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Providing and fixing 8SWG(4 MM) cOPPER wire on surface

6 or in recess for loop earthing along with existing surface/ Mtr 13.00 71.51 929.60

recessed conduit/submain wiring/cable as required

LIGHT & POLE 0.00 0.00

SITC of 8 Mtr GI Octagonal tapered pole with 600mm long

single arm , no till as per following spec.

1.Design Standard EN40/IS

2.Basic Wind Speed:140Kmph & Topography is considered

3.1) Pole Shaft and base plate: as per actual std.

4.Hot dip galvanised to ASTMA123, with minimum average

GI coating of 65 Um.

5.PU(Polyurethane) painted with avg.DFT of 70um, using

verey high quality p-lant & primer.

6.Approx Dia of bottom 156mm and top 76mm

7.Standred Pole Foundation with bots and all required

Electrical accessories complete.

SITC of 8 Mtr GI Octagonal tapered pole with 600mm long

single arm , no till as per following spec.

1.Design Standard EN40/IS

2.Basic Wind Speed:140Kmph & Topography is considered

3.1) Pole Shaft and base plate: as per actual std.

4.Hot dip galvanised to ASTMA123, with minimum average

GI coating of 65 Um.

5.PU(Polyurethane) painted with avg.DFT of 70um, using

verey high quality p-lant & primer.

6.Approx Dia of bottom 156mm and top 76mm

7.Standred Pole Foundation with bots and all required

Electrical accessories complete.

SITC of 8 Mtr GI Octagonal tapered pole with 600mm long

single arm , no till as per following spec.

1.Design Standard EN40/IS

2.Basic Wind Speed:140Kmph & Topography is considered

3.1) Pole Shaft and base plate: as per actual std.

4.Hot dip galvanised to ASTMA123, with minimum average

GI coating of 65 Um.

5.PU(Polyurethane) painted with avg.DFT of 70um, using

verey high quality p-lant & primer.

6.Approx Dia of bottom 156mm and top 76mm

7.Standred Pole Foundation with bots and all required

Electrical accessories complete.

SITC of 120 Watt Led Street Lighting Fixture, BIS

certified - hlgh pressure die east alumlnlum body with a

flat toughened glass protector (lK09), with a detachable

aluminium dle east control gear cover, top cover designed

for tool free opening and closlng, separate optical and

contröl gear compartments (lP66), sultable for both

horlzontal and vertical mounting for 60mm dla plpe with an

adjustable bracket (In step of 2.5 degree) from-20degree

to +15degree, automatic elactrlcal dlsconnectlon on Each 2.00 9022.28 18044.56

opening of control gear compartment, a spirit level

Indicator with respect to the horlzontal plane, a vent

pressure equalization unit and pre-cabled, overall syatem

efficiency of 125lm/W a( CCT 5700K, CRI > 70, LY0 60000

hrs, Electrlcal C\ass 1, ratsd vo\tags 240Vac, Power Factor

» 0.95 with BIS certlfled potted drlver havlng Internal

surge protectlon of 4/4 kV and an addtlonal surge

protection devlce of 10/10 kV. Make: KeSsTac / LT /

Havells /JaquarI LMI

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

Supply. Installation. Testing arid Cotritnlsslonlnp of approx

40W LED Postop made up of Die-cast aluminum spigot

for mounting LED driver and spun aluminum canopy Which

is painted white Inside. Pure Po(yester UV Proectect

Coated diffused. Natt Black Flnlsh. Hlgh Efficiency long life

LEO module with mOunted of}

}VICPCB. Lumen Efficacy or LED>130Lm/ W, and vlewlng

an9!e o( 120Deg to ensure better uniformi \y. High uality

pofycabonate diffuser is used over LED module

to enhance the lumen & output clear acrylic cover Is sed to

provideoverall glare free light-Powered by Built

)n potted , isolated electronic LED driver with

kPFC(SMPS based constant current supply) with lower D, Each 6.00 13452.00 80712.00

Output Short / Open Circuit protection, Over

Voltage protection, 4kV inbuilt surge protection, upto 10 t'

t kV with SPD & other safely test as per IS 1588S Part- ‘””

2/Sec 13. Suitable for pole mounting with OD of 76 mm

wiax with 4 nos. hex bolt Ms z 2o mm provided with the

re. IP 65, lK 07, THD<10°/•, PF>0.95, CRI»80,

OOOK cut, Operating temperature: -10 °C to +45 °C,

Dperaâng voltage range: 140 V - 270 V. has to be suitable

for mounting on above mentioned pole top.

SITC of approx 5 watt LED wall recessed Step

4 Light(IP65), 3000k,230v, complete witrh mounting bracket Each 20.00 5905.90 118118.00

SITC OF APPROX 20WATT led ON Ground, surface/

concrete mounted Spot Light, DIE Cast al housing,

5 tempered glass diffuser, 60degree bean, IP66,3000K Each 6.00 11811.80 70870.80

CCT,230V with tillable mounting bracket etc. complete.

SITC of approx 12 watt LED On Ground , surface/

concrete mounting Spot Light, die cast al housing,

6 tempered glass diffuser, 60degree beam, IP66, 3000K Each 12.00 9515.52 114186.24

CCT,230v, with tillable mounting bracket etc. complete

SITC of Surface/ceiling mounted luminaire with LED system

power:approx. 12w luminous flux of luminaire 1300lm,

colour temperature of 4000k Neutral White, CRI.80, 230V

constant current driver,70% of luminous flux after 50,000

opearting hours; Energy efficient LEDS, Direct lIGHT

eMISSION , lUMINAIRE HPOUSING IN PRESSURE DIE-CAST

ALUMINIUM, polystere powder white coloured coat applied

over a 5-Stage pre=trement , optasl diffuser for a

hhomogenous light distribution, electronic control gear,

protection class I ,IP 20, Mcadam<7,T.H.D<10% DRIVER

EFFICIENCY.85% SURGE PROTECTION OF 3kv,LM79

,LM80,BIS R number and reports to be submitted

FAÇADE LIGHTING 0.00 0.00

SITC of surface mounted, homogeneous Dot free LED

FbxiblB Linear Light, Wattage approx 8-12W/mtr, with

Ngh quality circuit design for stable and reliable

performance, surface material should be made of Silicon

with aluminium extrusion linear profile mounted properly æ

required and with other connecting accesso es, Suitably for

facade lighting, Symmetrtc dlst bution. Œninaire should

have diffuse silicone based cover for soft lllUfTifnÂti0Fł

1 With rated Input supply of DC 24V IP65 LED Driver MTR 10.00 11926.26 119262.60

@dudedj, With flush-fitting covar and Integral LED unit.

GÏ0UF Cif luminaire body Grey/Sliver, highly weather ^*

Powd0r-coated. External ballast as accessory üet be

P‹ovided separatedy, CCT 3000a. The luminaire ave

versatii0 O tICS : 120 , Mean rated service

LOO(tq 25 °C) = 50,000 h. łP68. Electrical safety

dass È P Ov erE ñcency : •85°/, Operating Temperature s

SITC of LED flood Light surface/concrete Base mounted of

approx 25-30 watt .made of pressure die cast akuminium

2 housing, with polycarbonate lens 3000k, IP65/66, with Each 12.00 4101.68 49220.16

adjustable mounting bracket anf intregarted driver,230v

AC as required complete.

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

SITC of LED SpikeLight surface/concrete Base mounted of

approx 12 watt .made of pressure die cast akuminium

3 housing, with polycarbonate lens 3000k, IP65/66, with Each 6.00 9515.52 57093.12

adjustable mounting bracket anf intregarted driver,230v

AC as required complete.

SITC of LED Inround lightt concrete Base mounted of

approx 6 watt .made of pressure die cast akuminium

4 housing, with polycarbonate lens 3000k, IP65/66, with Each 8.00 7874.14 62993.12

adjustable mounting bracket anf intregarted driver,230v

AC as required complete.

SITC of LED SpikeLight surface/concrete Base mounted of

approx 6 watt .made of pressure die cast akuminium

5 housing, with polycarbonate lens 3000k, IP65/66, with Each 1.00 8530.22 8530.22

adjustable mounting bracket anf intregarted driver,230v

AC as required complete.

CABLE SYSTEM 0.00 0.00

Supply and laying of aluminium conductor PVC insulated

amoured served Sheathed Cable 100 Volts grade at surface

in existing pipes , loose in trench , direct buried in ground

in adepth of 750mm below ground level over cushion of 75

mm .thick sand all around and protected with burnt bricks

on sides and on top.On surface the cable run shall be fixed

on M.S champs etc.of suitable size or as directed by the

engineer-in-chrge, complete in all respect. The amoured of

the cable shall be connetec with earth conductor by clamps

(i) 4 Sq mm 2 Core PVC Amoured Cables ISI Marked Mtr 500.00 81.96 40981.40

(ii) 6 Sq mm 2 Core PVC Amoured Cables ISI Marked Mtr 420.00 93.81 39400.20

(iii) 10 Sq mm 4 Core PVC Amoured Cables ISI Marked Mtr 125.00 157.99 19748.78

(iv) 16 Sq mm 4 Core PVC Amoured Cables ISI Marked Mtr 300.00 171.82 51545.94

(v) 25 Sq mm 3.5 Core PVC Amoured Cables ISI Marked Mtr 180.00 212.31 38215.01

(vi) 35 Sq mm 3.5 Core PVC Amoured Cables ISI Marked Mtr 120.00 257.72 30926.86

(vii) 50 Sq mm 3.5 Core PVC Amoured Cables ISI Marked Mtr 50.00 332.77 16638.59

Supplying and making END terminated with Brass

2 compressed gland and aluminium lugs for following sixe of 0.00 0.00

PVC Insulated and PVC Sheathed/XLPE Aluminium Cable of

1.1 KV required

Supplying and laying of following size DWC HDPE pipe ISI

marked along with all accessories like socket, bend,

couplers etc. conforming to is 14930, part ii complete with

filling and cutting , jointing etc.direct in ground (75cm

3 below ground level) including excavation and refilling the 0.00 0.00

trench but excluding sand cushioning and protective

covering etc. complete as required.(Please note that Cable

Trench & Cable Pits consider in Civil BOQ)

63 mm dia (OD-63 MM & ID-51 MM nominal) Mtr 50.00 246.62 12331.00

FEEDER PILLARS 0.00 0.00

Supply, installation, testing, commissioning of outdoor type

feeder pillar(Double door type IP 65) of suitable size not

less than 30cm and up to 45cm deep made out of 16 SWG

thick steel sheet duly compartmentalised having 4 strip

busbar of 100 amp capacity, doublr door with spring

loaded allen key type locking arrangement for inner

compartementr and separete coupboard type concealed

locking arrangment fot outer door.(Panel will have separete

4 compartement for electric supply co) duly rain and dust 0.00 0.00

protected. The Panel Shall be fixed on MS angle iron frame

work of suze 50mmx50mmx6mm(NS) 90Cm long legs out

of which 45 cm duly grouted in cement concrete 1:2:4(1

cement, 2 sand and 4 stone aggrigate 20 cm) band having

following accessories mounted inside the cubical panel I/c

connection , inter connection, earth studs, painting etc. as

STREET LIGHTING FEEDER PILLAR-1 & 2 AS FOLLOW. EACH 2.00 217719.44 435438.88

Digitally signed by Rakesh

Sl.no. Description of Items UNIT QNTY RATE AMOUNT

415V, 63AmpsTP+N+E AL Busbar(10ka) -01 set 0.00 0.00

Voltmeter 0-500 volt 96 sqmm flush type with selector

Ammeter 0-500 volt 96 sqmm flush type with selector

Indicating lamps(RYB) with control MCB-01 set 0.00 0.00

32 Amps 4P 10KA 415V,50HZ MCB-06 Nos 0.00 0.00

Power Contractor 4 Pole 32 Amps, 415V,50HZ-06 Nos 0.00 0.00

32 Amps 2P 10KA 230V,50HZ MCB-08 Nos 0.00 0.00

Power Contractor 2 Pole 32 Amps, 230V,50HZ-08 Nos 0.00 0.00

Contact Mulitiplier:6A, NO/NC as required -2 Nos 0.00 0.00

Selector/ Test Switches as required in control circuit 0.00 0.00

Surge arrestor:B/C Type 0.00 0.00

Danger notice Plate 0.00 0.00

GRAND TOTAL 17870156.78

GRAND TOTAL 17870156.78

Digitally signed by Rakesh

Construction of Main drain From Women's College Chhak towards Joggers Park via Sub-

Collector office culvert, Balangir

Sl.no. Description of Items UNIT QNTY RATE RATE

1 Excavation for roadwork in soil with hydraulic

excavator of 0.90 cum bucket capacity including

cutting and loading in tippers, trimming bottom

and side slopes, in accordance with

requirements of lines, grades and cross- Cum 3886.81 104.78 407275.50

sections, and transporting to the embankment

location with a lift upto 1.5 m and lead upto

1000 m as per Technical Specification Clause

2 Filling foundation and plinth with filling sand well

watered and rammed including all costs etc Cum 335.15 684.25 229325.25

3 Providing Cement Concrete (1:4:8) using

40mm.C.B size metal including all cost , Cum 332.10 5583.96 1854433.32

carriage, compaction and curing etc complete

4 CC work of M20 grade with 20mm and

downgraded black granite(Crusher broken)

stone chips for CC and RCC work including Cum 436.32 6165.48 2690120.66

watering curing and cost of all labour T&P etc

5 Rigid smooth centering shuttering for C.C.work

including all cost and as per specification etc sqm 900.00 276.03 248423.04

6 Cutting,bending, binding of HYSD (Fe-415) Steel

including all cost , cost of carriage etc. complete Qntl 174.53 10315.25 1800299.48

as per approved specification.

7 Laying excavated earth in layers not exceeding

0.3m in depth and as per specification approved

by the department along with proper

compaction with P.R.R. including hire and Cum 3827.81 8.13 31120.86

running charges of P.R.R. (Measurement to be

taken on the finished compacted section of the

TOTAL AMOUNT 7260998.10

TOTAL AMOUNT 7260998.10

Digitally signed by Rakesh

Re-Construction of Town-Hall, Balangir Municipality.

Sl.no. Description of Items Units Quantity RATE AMOUNT

CIVIL AND INTERIOR WORKS

Providing and laying plain cement concrete 1:3:6 (1 cement : 3

sand : 6 stone agregate 12 mm nominal size) as levelling course

1 in floor and plinth etc. including tempering, curring, shuttering Cum 46.00 5989.79 275530.27

etc. complete all depth and height as direction of Engineer-In-

16mm cement plaster on external RCC/brick surfaces in cement

2 plaster 1:6 (1 cement : 6 coarse sand) including necessary Sqm 48.00 250.88 12042.05

scaffolding, curing etc. all complete at all floors and all heights as

direction of Engineer-In-charge.

12mm cement plaster on internal smooth side of RCC/brick

surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand)

3 including necessary scaffolding, curing etc. all complete at all Sqm 74.84 175.19 13110.97

floors and all heights as direction of Engineer-In-charge.

Providing, fixing, fitting of fully glazed door made out of Black Nos

powder coated aluminium frame using door section of 19501 of

Jindal make with top, bottom and vertical member, Glazing clip

no19352 and jointing angles and 10mm thk. toughened clear

4 glass with itching as per drawing/design with all necessary 2.00 30090.00 60180.00

hardware including long S.S handle to both side, including all

cost of labour, T&P, hire charges of drilling mechine, labour

charges etc. complete as per direction of Engineer-In-Charge at

all floors and all heights.

Providing and laying Matte/Industrial Finish Vitrified floor tiles Sqm

300x300 mm (thickness to be specified by the manufacturer) 1st

quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN,

KAJARIA or equivalent approved make, colours & shades, except

5 white, ivory, grey, fume red brown, laid on 20 mm thick cement 5.04 1006.36 5072.07

mortar 1:4 (1cement:4coarse sand) including pointing the joints

with white cement and matching pigments, etc. complete as per

direction of Engineer-In-Charge at all floors and all heights.

Providing and fixing 1st quality Ceramic glazed wall tiles Sqm

conforming to IS : 15622 (thickness to be specified by the

manufacturer) minimum thickness 5mm of NITCO, SOMANY,

ASIAN, KAJARIA or equivalent approved make in all colours,

shades except burgundy, bottle green, black of size 300x200 in

skirting and dados over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @

3.3 kg per sqm including pointing in white cement mixed with

pigment of matching shade complete as per direction of

Engineer-In-Charge at all floors and all heights.

Providing and laying Vetrified floor tiles 600x600 mm (thickness Sqm

to be specified by the manufacturer) premium 1st quality

conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or

equivalent approved make, colours & shades, except white, ivory,

7 grey, fume red brown, laid on 20 mm thick cement mortar 1:4 70.00 1242.96 87007.19

(1cement: 4coarse sand ) including pointing the joints with white

cement and matching pigments, etc. complete as per direction of

Engineer-In-charge at all floors and all heights.

8 Mirror Glass Panel Sqm 10.80 4543.00 49064.40

Providing, fitting and fixing full height WPC paneling to walls and

columns wherever necessary from floor lvl to ceiling ht or as per

drawing/design made out of 50.8mmx25.4mmx1.34mm thick

Aluminium rectangular sections placed @ 600mm c/c both ways

on grid, on top of grid 12mm fire resistant and termite proof wpc

board (conforming to IS code :5509) to be provided with 4mm

9 thk veneer of approved shade and colour finished with melamine Sqm 31.04 8850.00 274704.00

polish as per design/drawing or as directed by the

Architect/Engineer -in- Charge. The rate includes cost of cutouts

for electrical switches, light fixtures, wall bracket fans if any, all

complete with materials, labour, T&P, taxes etc. (Basic Rate of

12mm thk. wpc board Rs.1308/Sqm & 4 mm thk. veneer

Rs.2690/Sqm make- Truwood ).

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

B) METAL SHEET ROOFING - Supplying and fixing of non-insulated

Colour Coated galvalume metal sheets (Zinc aluminium alloy

Coated. Not less than 150gms/sq.m. Having high tensile steel

sheet (FY 550 Mpa) of 0.5 mm minimum thickness (BMT). The

outside face (exposed face) shall be permanently colour coated

with PVF-2 paint of minimum DFT 20 microns over primer and

inner side (Internal face) shall be coated with same paint of

minimum DFT 12 microns with all fasteners and fixtures.

Scaffolding etc. Complete at all heights as per drawings and

specification including preparation of bill of materials and shop

drawings. (Galvalume sheets shall be of any reputed make ‘ Tata

Blue Scope Steel Limited’ Or equivalent.

11 Sheet Roofing (Repair) Sqm 100.00 1475.00 147500.00

12 Ceilling Fan Sqm 5.00 4130.00 20650.00

GREEN ROOM INTERIOR Sqm 54.40 5900.00 320960.00

PUBLIC TOILET (STAGE) 0.00 0.00

DOORS AND WALL PANNELINGS (8 nos) Nos 8.00 67112.50 536900.00

STEEL TRUSS FOR STAGE CEILING ls 1.00 240720.00 240720.00

GYPSUM CEINLING Sqm 271.60 1139.88 309591.41

FLOORING VETRIFIED Sqm 457.50 1322.78 605171.85

ELECTRICAL WORK 0.00 0.00

Recessed wirring to light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper

conductor of ISI marked with 20 mm dia PVC flexible non

metallic conduit FRLS type ISI marked ) switch ISI marked , and

ceiling rose ISI marked Make- Anchor/Havells of modular type

G.I box with metallic cover plate (both side) (anti bactorial &

flame retradant type) d of suitable size, modular box with 1.5 sq.

Mm FRLSH PVC insulated single core multistandard copper

conductor as earth wire including all accessories and connection

as per direction of Engineer -in -Charge.

Group control of point in Recessed wirring to light point/ fan

point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLSH/LSZH PVC insulated copper conductor of ISI marked

20 mm dia PVC flexible non metallic conduit FRLS type ISI

marked switch ISI marked , and ceiling rose ISI marked of

modular type G.I box with metallic cover plate (both side)(anti

bactorial & falme retradant type), of suitable size, modular box

with 1.5 sq. Mm FRLS PVC insulated single core multistandard

copper conductor as earth wire including all accessories and

connection as per direction of Engineer -in -Charge.

Supplying ,fixing of 6A Plug on the same board in existing switch

board with complete fitting by 01 no of 6A switch & socket

c) (modular type)( (anti bactorial & flame retradant type)) & other Nos 25 268.73 6718.33

required accessories of ISI marked as approved as per direction

of Engg. -in -Charge.

Supplying,fixing of 6A Plug on the separate board with complete

fitting by 01 no of 6A switch & socket(modular type)( (anti

bactorial & flame retradant type)) with suitable size modular box

d) & cover(anti bactorial & falme retradant type) including supplying Nos 20 707.34 14146.78

of all required accessories of ISI marked as approved as per

direction of engg-in-charge...

Supplying,fixing of 1x16A Plug on the separate board with

complete fitting by 01 no of 16A switch & socket(modular

e) type)((anti bactorial & flame retradant type)) with suitable size Nos 20 898.10 17961.96

modular box & cover(anti bactorial & falme retradant type)

including supplying of all required accessories of ISI marked as

approved as per direction of engg-in-charge..

Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with

complete fitting by 01 no of 16A+2 no 6A switch &

socket(modular type) ( (anti bactorial & falme retradant type)

f) with suitable size modular box & metallic cover plate (both Nos 10 1922.90 19229.04

side)(anti bactorial & falme retradant type)including supplying of

all required accessories of ISI marked as approved as per

direction of engg-in-charge.

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with

complete fitting by 01 no of 16A+3 nos 6A switch &

socket(modular type) ( (anti bactorial & falme retradant type)

g) with suitable size modular box & metallic cover plate (both Nos 2 2741.64 5483.27

side)(anti bactorial & falme retradant type)including supplying of

all required accessories of ISI marked as approved as per

direction of engg-in-charge..

Receass wiring for circuit/submain wiring with the following

mentioned size PVC FRLSH/LSZH insulated, copper conductor,

single core cable ) or equievalant reputed make A catagory ISI

marked as approved, in recessed PVC conduit Heavy duty FRLS

2 of mentioned size ISI marked as approved) as required as per 0.00 0.00

direction of Engg.-in-Charge. Ncessary test report & Warrnaty

certificate to be submitted to the department for genuinity of

product & to avail free after sales service within warranty period

for acceptance of materials

2 nos single core 2.5 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

b) continuty conductor in 20 mm dia non metallic heavy duty Mtr 278 201.90 56127.64

flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER

POINT TO EACH QTR) (2X2.5+1X1.5)

2 nos single core 4 sq. mm copper wire for phase and neutral

and 01 no of single core 1.5 sq. mm copper wire for earth

d) continuty conductor in 20 mm dia non metallic heavy duty Mtr 112 226.96 25419.65

flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM

LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL

LOAD) (2X4+1X1.5)

4 nos single core 4 sq. mm copper wire for phase and neutral

and 02 nos of single core 2.5 sq. mm copper wire for earth

e) continuty conductor in 32 mm dia non metallic heavy duty Mtr 111 341.14 37866.32

flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL

ACCL TO EACH QTR ESSENTIAL LOAD) (4X4+2X2.5)

4 nos single core 6 sq. mm copper wire for phase and neutral and

02 nos of single core 2.5 sq. mm copper wire for earth continuty

g) conductor in 32 mm dia non metallic heavy duty flexible Mtr 40 405.19 16207.54

conduit.(LFDB TO LBDB/power unit/point) (4X6+2X2.5)

4 nos single core 10 sq. mm copper wire for phase and neutral

and 02 nos of single core 4 sq. mm copper wire for earth

h) continuty conductorin 32 mm dia non metallic heavy duty flexible Mtr 40 582.02 23280.93

conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4)

Supplying and fixing following size/ modules, GI box along with

5 modular base & metallic cover plate (both side)(anti bactorial 0.00 0.00

type) plate for modular switches in recess etc as required as per

direction of Engg.-in-Charge. MAKE-

a) 4 moudle(125mmx75mm) Nos 10 371.77 3717.71

b) 1 moudle(75mmx75mm) Nos 10 306.33 3063.28

Supplying and fixing of following sizes of medium class PVC FRLS

conduit ISI marked along with accessories in surface/recess

6 including cutting the wall and making good the same in case of 0.00 0.00

recessed conduit as required as per direction of Engg.-in-Charge

Supplying and installation of AC starter Modular type, or

equievalant reputed make & model A catagory ISI marked as

approved coil voltage-415 Volt A.C. & O/L range of 9-14A range

on mod Box of suitable size including modular coveras required as

8 per direction of Engg.-in-Charge .All the Components should be Nos 14 861.90 12066.54

warrantied for a replacement period of 5 years against defects

with ncessary test report & Warrnaty certificate to be submitted

to the department for genuinity of product & to avail free

aftersales service within warranty period for acceptance of

Supplying,fixing of Blanking plate(modular type)( (anti bactorial

& flame retradant type)) in existing switch box(anti bactorial &

16 flame retradant type) including supplying of all required Nos 16 58.48 935.69

accessories of ISI marked as approved as per direction of engg-

B Sub-Head II (Light fitting Fixture & Fan) 0.00 0.00

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Supplying, installation, of exhaust fan of heavy duty 300 mm

1 sweep of exhaust fan in the existing wall, including fixing & Nos 5 4347.07 21735.36

conntection as required as per direction of Engg.-in-Charge.

Replacement Warranty will be 5 years.

Supplying, installation, of exhaust fan of heavy duty 380 mm

sweep 1400 rpm with louvers of exhaust fan in the existing wall,

2 including fixing & conntection .as required as per direction of Nos 3 5114.29 15342.86

Engg.-in-Charge. Replacement Warranty will be 5 years.

Supplying, installation, testing and commssioning of 1400 mm

sweep white/milky colour ceiling fan including wiring the down rod

of standard length (upto 30 cm) with 1.5 sq mm PVC insulated,

3 copper conductor, single core cable etc. as required.(With fan Nos 12 3077.20 36926.45

Regulator) as required as per direction of Engg.-in-

Charge.Replacement Warranty will be 5 years.

Supplying, installation, testing and commssioning of 1200 mm

sweep white/milky colour ceiling fan ) including wiring the down

4 rod of standard length (upto 30 cm) with 1.5 sq mm PVC Nos 30 2956.07 88681.96

insulated, copper conductor, single core cable etc. as required as

per direction of Engg.-in-Charge,Replacement Warranty will be 5

years.. .(With fan Regulator)

Supplying and fixing of Energy efficient Recess mounted

LED luminaire made up of CRCA powder coated sheet steel

housing of 595 X 595 mm x 70 mm size with of not more than

25W and system lumens output not less than 3250 lumens (130

lm/ wt) with diffusers for better light transmission and pure

effect with High luminous flux LEDs for better light output, CRI

not less than 80, CCT of 5700-6500 degree K, THD less than

10%,internal surge protection of 3 KV, complete with Non

5 integrated isolated electronic driver (protects the output No 40 3727.45 149098.19

/secondary side from any disturbance on the input / primary side

ensuring safe operation)and all other accessories suitable for

operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5

years warranty)supply .as required as per direction of Engg.-in-

Charge (Make: Panasonic/LT/Trilux /Philips/Wipro or equievalant

reputed make & model A catagory ISI marked as approved.) . The

luminaire must be Replacement Warranty will be 5 years.

Supplying and fixing of Energy efficient recessed mounted

LED luminaire made up of CRCA powder coated housing, Top

opening clean room LED luminaire of 600 X 600 x 65 mm size

with of 45 W and system lumens output not less than 4500

lumens , IP65 ,dust free & zero maintenance , anti glare high

transmittance PMMA diffuser , operating volatge range 150-265

V, high performance potentiometric electronic driver for zero

maintenance , 2.5 KV internal urge protection, L70 B 50: 50,000

hrs., CRI not less than 80, CCT of 5700-6500 degree K, THD less

than 10%,,IP 65 protection complete with all other accessories

suitable for operation on 230 V, 50 Hz supply as required as per

direction of Engg.-in-Charge. (Make:Panasonic /PHILIPS/ Wipro or

equievalant reputed make & model A catagory ISI marked as

approved ) .The luminaire should be Replacement Warranty will

be 5 years. .Each CLEAN ROOM FITTING FOR OT ICU MRI CT.

Supplying and fixing of Energy efficient surface mounted

square shape 20 W LED luminaire of dimension of 225x 225 x 35

mm consists of white powder coated , die-cast Alluminium

housing with high quality frosted diffuser for glare-free uniform

lighting distribution with wattage not more than 20 watt and

lumen output of 1500 lumens, , CRI not less than 80,CCT of

6000 degree K,THD less than 10%, with electronic driver, internal

surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)

and all other accessories suitable for operation on 220 V to 240 V

supply as required as per direction of Engg.-in-Charge. ( Make :

Panasonic /Trilux/Osram/PHILIPS/Wipro or equievalant reputed

make & model A catagory ISI marked as approved).The luminaire

should be Replacement Warranty will be 5 years

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Supplying and fixing of Energy efficient recess mounted

LED luminaire with white powder coated ,pressure die-cast Al

housing ,with high transmititivity,non -yellowing PMMA diffuser,

with wattage not more than 20 watt and lumen output not less

than 2600 Lumen ( 130 lumens/watt ) of size 595 x595 x 70 mm

, ,CRI not less than 80,CCT of 5700-6500 degree K,THD less

than 10%, with Non integrated isolated driver (protects the

output /secondary side from any disturbance on the input /

primary side ensuring safe operation), all other accessories , life :

50,000 burning hours (5 years warranty) , Internal surge

protection of 3 KV suitable for operation on 230 V, 50 Hz supply

as required as per direction of Engg.-in-Charge. ( Make :

Panasonic / LT /Wipro/PHILIPS or equievalant reputed make &

model A catagory ISI marked as approved.) The luminaire should

be Replacement Warranty will be 5 years.

SITC of energy efficient LED tube light fittings with decorative

alluminium batten and LED tube light having power rating not

more than 20 watt and lumen output not less than 2200 lumen

complete with electronic driver and all other accessories with

9 diffuser having 5 years warranty i/c connection etc as required Nos 12 1109.74 13316.91

as per direction of Engg.-in-Charge. (Similar to

Panasonic/PHILIPS/LT/wipro or equievalant reputed make &

model A catagory ISI marked as approved.). The luminaire should

be Replacement Warranty will be 5 years .

SITC of Sleek LED 10 watt mirror light fitting with extruded

polycarbonate housing,High optically efficient diffuser,above wash

basin complete with all accessoriesetc. directly on wall, including

connection with 1.5 sq. mm FRLS PVC insulated, copper

10 conductor, single core cable and earthing etc. as required as per Nos 6 1019.24 6115.42

direction of Engg.-in-Charge.

. )The luminaire should be Replacement Warranty will be 5 years

SITC of IP 20 Non-integral flexible LED strip light,High optically

efficient diffuser,, 4000K with 12 w/mtr @ 5Mtr pool with Driver

11 extra as required as per direction of Engg.-in-Charge ( Make : Nos 2 2115.06 4230.11

Panasonic The luminaire should be Replacement Warranty will be

Supplying and fixing of small focus light for small monuments as

12 30W , 5700 K required as per direction of Engg.-in-Charge Make Nos 4 3902.90 15611.59

: )The luminaire should be Replacement Warranty will be 5 years

c) BDBS,DB,AC DB,FLOOR PANELS,MCBS 0.00 0.00

Supplying and fixing of following mentioned way, three

pole/single pole and neutral, sheet steel,double door MCB

distribution board, 415 volts/240 volts shall be as per IEC 61439-

3,integrated door earthing system offering additional safety to the

user,High quality polyurethane Gasket,the box and cover shall be

fabricated to withstand IK09,the DB should be properly pre-

treated with 7 tank process and duly powder coated,

phosphatized with powder coated finish, on surface/recess,

complete with terminal blocks,with suitable size FR PVC insulated

copper conducter up to terminal blocks, tinned copper busbar,

neutral busbar, earth bar, din bar. or equievalant reputed make

& model A catagory ISI marked as approved. as per direction of

Engg.-in-Charge. The Distribution boards should be Replacement

Warranty will be 5 years

8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC

61439-3 suitable for Flush mounting and Surface mounting with

d) 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Nos 4 3762.26 15049.06

Bar & Cable ties for cable management, prefitted masking sheet,

IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-

Supplying and fixing 20 amps rating, 240 volts, C series, Double

poles MCB ofn the existing MCB DB complete with connections as

per direction of Engg.-in-Charge. The MCB should be

2 Replacement Warranty will be 5 years .MCB should have the fault Nos 2 463.67 927.34

indication system in different colour for ON, OFF & TRIP condition

or Mid trip position for Trip conditions for easier identification of

fault.Warranty on MCB is 5 years.

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Supplying and fixing 6 amps to 32 amps rating, 240 volts, C

series, single poles MCB of or equievalant reputed make & model

A catagory ISI marked as approved. the existing MCB DB

complete with connections as per direction of Engg.-in-Charge.

3 The MCB should be Replacement Warranty will be 5 years.MCB Nos 200 183.80 36759.36

should have the fault indication system in different colour for ON,

OFF & TRIP condition or Mid trip position for Trip conditions for

easier identification of fault.Warranty on MCB is 5 years.

Supplying and fixing 40 Amps rating, TPN, 415 volts,

RCCB,300mA .Make-Equievalant higher model of in the existing

4 MCB DB complete with connections, testing and commissioning Nos 4 3127.33 12509.32

etc. as required as per direction of Engg.-in-Charge. .(4W TPN

BDB IC)AC ODU CONTROLLER). The RCCB should be

Replacement Warranty will be 5 years

Supplying and fixing 25Amps DP 240 volts, RCCB,300mA in the

5 existing MCB DB complete with connections as per direction of Nos 4 2350.37 9401.48

Engg.-in-Charge. The RCCB should be Replacement Warranty

will be 5 years

Supplying and fixing 40Amps DP 240 volts, RCCB,300mA in the

6 existing MCB DB complete with connections as per direction of Nos 2 2681.76 5363.52

Engg.-in-Charge. The RCCB should be Replacement Warranty

will be 5 years

Supplying and fixing 63Amps DP 240 volts, RCCB,300mA in the

7 existing MCB DB complete with connections as per direction of Nos 2 3091.13 6182.26

Engg.-in-Charge.The RCCB should be Replacement Warranty will

Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA or

equievalant reputed make & model A catagory ISI marked as

approved in the existing MCB DB in the existing MCB DB

8 complete with connections as per direction of Engg.-in- Nos 5 3677.33 18386.64

Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB

should be Replacement Warranty will be 5 years

d) (Earthing) INSTALLATION 0.00 0.00

S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6

mm thick ISI marked including accessories and providing

masonary with cover plate having loccking arrangement and

1 watering pipe etc (WITH charcoal and salt) as required as per Nos 2 19350.18 38700.37

direction of Engg.-in-Charge. The entire earthing system should

be Replacement Warranty will be 5 years

S/IT/C of materials and installation of pipe earth electrode made

out of 50mm dia class B G.I. pipe of 3.0 metre long with

arrangements for fitting/ termination of G.I. flat / wire with G.

I. nut bolts & washers including cost of burnt wood charcoal,

2 salt, foreign soil, water pouring arrangements, brick masonary Nos 2 3486.57 6973.14

enclosure on top with removable RCC cover complete with labour

for excavation of pit in all kinds of soil & rock as required and as

per direction of Engineer-in-charge.The entire earthing system

should be Replacement Warranty will be 5 years

Providing and fixing 4 mm dia copper wire on surface or in recess

3 for loop earthing as required.as per direction of Engg.-in-Charge. Mtr 122 133.67 16307.79

Providing and fixing 25mm x 5 mm copper strip on surface or in

4 recess for connections etc. as required as per direction of Engg.- Mtr 15 1526.07 22891.06

Supplying and making brick massonary pedastal with extra super

5 structure including cement plastering etc as required as per Mtr 1 3773.40 3773.40

direction of Engg.-in-Charge.

e) CABLING AND END TERMINATION MAIN AREA 0.00 0.00

Supplying of one number PVC insulated armoured and PVC

sheathed XLPE property AL. conductor power cable of 1.1 KV

grade of following size cables as per direction of Engg.-in-

1.1 Charge. Ncessary test report & Warrnaty certificate to be 0.00 0.00

submitted to the department for genuinity of product & to avail

free after sales service within warranty period for acceptance of

b) 4core x 16 sq mm (FDB LIGHT 1 RUN UPTO 1F ) Mtr 15 202.75 3041.21

3.5core x 35 sq mm (To FDB LIGHT / power BDB/UPS

PANEL,separate panel for OT Complex,MCU)

2 LAYING OF CABLE 0.00 0.00

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size not exceeding 25 SQ. MM direct in ground in the

2.1 trench in one horizental formation including excavation ,sand Mtr 12 181.01 2172.14

coushing protection covering and refilling the trench etc as

required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM

2.2 direct in ground in the trench in one horizental formation including Mtr 51 201.90 10296.80

excavation ,sand coushing protection covering and refilling the

trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

2.4 grade size not exceeding 25 SQ. MM direct in ground in the Mtr 25 58.48 1462.02

EXISTING PIPE etc as required as per direction of Engg.-in -

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

2.5 grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM Mtr 22 80.76 1776.70

direct in ground in the EXISTING PIPE etc as required as per

direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

2.6 grade size not exceeding 25 SQ. MM in open duct etc as required Mtr 22 64.05 1409.11

as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

2.7 grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct Mtr 20 64.05 1281.01

in ground in the EXISTING PIPE etc as required as per direction of

Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

2.8 grade size not exceeding 25 SQ. MM in surface with shaddle and Mtr 26 112.78 2932.39

screw etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

2.9 grade size not exceeding 120 SQ. MM From 25 SQ. MM in Mtr 20 178.23 3564.54

surface with shaddle and screw etc as required as per direction of

Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv

2.10 grade size not exceeding 400 SQ. MM From 120 SQ. MM in Mtr 8 182.40 1459.24

surface with shaddle and screw etc as required as per direction of

Engg.-in -charge.

Supplying and making end termination with brass compression

3 gland and aluminium lugs for following mentioned size cable.as 0.00 0.00

per direction of Engg.-in-Charge.

Providing,fixing and laying of following dia G.I. pipe (medium

4 class) in ground complete with G.I fitting incl. trenching(75 mm 0.00 0.00

depth)and refilling as per direction of Engg.-in-Charge.

Providing,fixing and laying of fallowing dia HDPE pipe (medium

5 class) in ground complete with fitting incl. trenching(75 mm 0.00 0.00

depth)and refilling as per direction of Engg.-in-Charge.

PHE INTERNAL 0.00 0.00

Providing all materials, labour, T&P for fitting and fixing white

glazed vitreous china water closet (European pattern) with seat

cover (solid) and Cistern of approved make in all floor including

1 supply of sutaible bracket, PVC wall plug and Brass screws etc. all NOS 4.00 7163.62 28654.48

complete including cost, taxes and conveyance as per

specification all complete as per direction of Engineer-in-charge.

Supply all materials and labour for fitting and fixing of following

size white glazed vitreous china Under counter wash hand basin

of approved make in all floor of approved quality including cutting

2 the walls & floor and making good the damages with cement NOS 2.00 6430.80 12861.60

concrete etc. including all taxes, duties, transportation etc. all

complete as per direction of EIC.

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Supply all materials and labour for fitting and fixing of following

size Half Pedestal wash hand basin of approved make in all floor

3 of approved quality including cutting the walls & floor and making NOS 3.00 7604.87 22814.61

good the damages with cement concrete etc. including all taxes,

duties, transportation etc. all complete as per direction of EIC.

Supplying all materials, labour, T&P and fixing with labour ,T&P as

per specification , the following Brass/ CP (Hindware) / G.M.

4 fittings at appropriate locations to thr pipe lines at all floors and at 0.00 0.00

all heights, of approved make confirming to relevent IS

specification . etc complete in all respect.

(a) Health Faucet ABS SS braided hose 1.2 m with CP hook. NOS 4.00 2535.84 10143.36

(b) Two-way Bibcock with wall Flange. 0.00 0.00

15 mm nominal bore NOS 4.00 3264.06 13056.26

(c) 15mm dia pillar cock . NOS 3.00 3055.20 9165.61

(d) 15mm dia Angle Stop cock with Wall Flange. NOS 5.00 2087.21 10436.04

(e) 15mm dia Concealed Stop cock with Wall Flange. NOS 3.00 1559.63 4678.88

Providing and fixing 700x500 mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

(f) ground fixed to wooden cleats with C.P. brass screws and washers 0.00 0.00

Rectangular shape 700x500 mm NOS 3.00 2165.88 6497.63

(g) C.P. Soap Dish holder. NOS 4.00 2149.17 8596.68

32 mm C.P. Bottle Trap 32mm with 250 & 190 mm Long Wall

(h) Connection pipe & wall Flange No. 4.00 2575.94 10303.76

(As per Cat no.-ALD-769L250X190 of Jaquar)

(Make: Jaquar/Hindware)

(i) 32mm dia C.P.waste coupling 32mm SS (Full Threaded) No. 3.00 765.82 2297.46

Providing and fixing towel ring 178 mm dia with brackets fixed to

(j) wooden cleats with CP brass screws with concealed fittings No. 4.00 2415.81 9663.26

arrangement of approved quality.

6 Floor drain 160x160 mm dia stainless steel grating NOS 6.00 323.45 1940.73

Supplying all materials, labour & T&P for fitting and fixing of

following sizes of white glazed vitreous china flat back half stall

urinal basin confirming to specification of approved make as per

IS-2556 with ISI mark in all floor along with supply & fixing of

7 necessary component parts like pair of C.I./M.S. bracket including 0.00 0.00

connection from water supply pipe with all taxes, duties,

transportation etc. all complete as per specification & direction of

the Engineer-in-charge.

a) Flat back half stall urinal . (male urinal) Set 2.00 17063.72 34127.45

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes

IS 15778,SDR -13.50 having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings, i/c fixing

the pipe with clamps at 1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent cement and the cost

of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

20mm dia CPVC Pipe meter 9.00 405.88 3652.96

Supply, Fixing, jointing, testing and commissioning of uPVC SWR

pipe type B (SWR) pipes(SCH-80) for Soil - waste & Kitchen

9 waste pipe cut to required lengths including all necessary fittings 0.00 0.00

and specials such as bends, junctions offsets, access pieces.

100mm dia UPVC Pipe RM 45.00 904.50 40702.64

75mm dia UPVC Pipe RM 48.00 608.62 29213.67

Supplying all materials,labour and T&P for fitting and fixing of

10 following dia UPVC Rain water pipes and fittings along with fixing 0.00 0.00

to wall complete in all respect.

(i) 100 mm diameter. meter 13.00 904.50 11758.54

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Providing, fixing, jointing and testing PP mineral filled low noise

level Soil & Waste piping system as per BS EN 1451, SN4-S16,

with minimum density for pipes and fittings 1.4 gm/cm3. Pipes

and fittings made from Polypropylene -M (mineral reinforced) and

available from 50 – 160 mm with push fit SBR type rubber ring

sockets for easy installation. Pipes should have 3 layer design.

Should have hot water resistance up 95 ºC for short term loading

(90ºC for long term loading). Piping system should have chemical

resistance of pH 2-12. Fittings should have swept design from 75-

160mm and depth gauge for proper fittings against thermal

12 expansion and contraction, should have top marking at every 15° 0.00 0.00

intervals in angular rotation for better alignment. Piping system

includes all required fittings & accessories such as coupler, bend,

tee, Y, reducer, access pipe, multi floor traps, Nahni trap with

extension piece etc. for conveying soil, waste & rainwater purpose

in floors, ceiling suspended, or on walls, with leak proof joints etc.

Setting the pipe in 1:2:4 CC in case of concealed plumbing, wall

chasing, holes, supporting, clamping, covering back with chicken

mesh & plaster and making the wall good as per approved shop

drawing. Testing as per tender specifications/EIC.

Providing all materials, labour, T&P for fitting & fixing of following

Bronze Ball Valves confirming to IS-778 with ISI mark in all floor

& fixing with the pipes after cutting the pipes to required shape &

13 size including wastage etc. of following nominal diameter, all 0.00 0.00

complete including testing the joints with required water

pressure.The cost inclusive of all taxes,duties,transportation

scaffolding etc. all complete as per specification and direction of

Engineer-in-charge..

a) 25mm dia ball valve No. 4.00 688.96 2755.84

b) 32mm dia ball valve No. 3.00 1100.55 3301.66

Providing all materials labour, T&P for making grooves in

bricks/stone masonary walls vertically or horizontally up to

required depth and width in all floor for laying of pipes and fittings

up to 50mm dia, testing the joints with required water pressure

14 and making good the damages with cement concrete 1:2:4 with Mtr. 27.00 221.81 5988.85

12mm size h.g.c.b.chips and finished smooth with cement morter

(1:4) to original shape including cost of materials, curing,

conveyance, taxes of all materials etc. all complete as per

specification & direction of EIC.

Providing all labour,T&P for cutting holes in bricks or stone

masonry wall for taking pipes in all floors and making good the

damages with cement concrete 1:2:4 finished smooth with CP 1:4

15 to original shape including cost of all materials, curing, 0.00 0.00

conveyance, taxes, duties etc. all complete as per specification &

direction of Engineer-in-charge.

a) For 25mm to 110mm dia pipe to pass in 250mm thick wall No. 25.00 62.94 1573.41

Providing all labour,T&P and cutting holes in RCC chajja/roof/floor

16 for taking pipes through and making good the damages with No. 10.00 223.62 2236.19

supply of all required materials etc. complete as per the direction

of the Engineer-in-charge.

17 Square Gully trap 110mm (IP) No. 3.00 952.40 2857.20

WATER SUPPLY 0.00 0.00

Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, and dressing of sides, ramming

of bottoms, depth upto 1.5 m, including getting out the excavated

1 soil, and then returning the soil as required, in layers not 0.00 0.00

exceeding 20 cm in depth, including consolidating each deposited

layer by ramming, watering, etc. and disposing of surplus

excavated soil as directed, within a lead of 50 m : All kinds of soil

Pipes, cables etc, not exceeding 80 mm dia. meter 30.00 94.68 2840.50

Providing and fixing to wall or celling and floor rigid CPVC pipes

class IV (8 kgf/cm2) class II (6kgf/cm2) conforming to IS:

4985/2000 AND Pipe fittings of the following nominal bore with

2 clamp including making good the wall,ceilling and floor all 0.00 0.00

complete as per specification and direction of Engineer-in-charge.

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Supplying all materials, labour, T&P, fitting & fixing of different

size bourden type pressure gauge(16 kg/cm2). including cost,

3 conveyance & taxes of all materials, T&P etc. all complete as per 0.00 0.00

P.H. specification and as per the direction of the Engineer-in-

Providing and fixing C.I. double acting air valve of approved

4 with bolts, nuts, rubber insertions etc. complete (The tail pieces, 0.00 0.00

tapers etc if required will be paid separately) :

INTERIOR WORKS 0.00 0.00

HALL SEATING(460+64) 0.00 0.00

15-degree reclining theater chair for ultimate comfort and

relaxation. Frame made of durable and lightweight MS (Mild

Steel) material, powder-coated for corrosion resistance.

Weighs around 32 kgs, easy to fix or move as needed.40 density

foam for seat, 30 density foam and sofyty 1" foam for backrest

for comfortable support. Paddle handle for easy 15-degree

reclining adjustment. Upholstered with 100% polyester material

for durability, stain, and fade resistance. Comes fully assembled,

ready to use, with a screw port for stability. Ideal for theaters and

auditoriums, offering comfort, durability, and ease of use

10-degree reclining theater chair for ultimate comfort and

Frame made of durable and lightweight MS (Mild Steel) material,

powder-coated for corrosion resistance. Weighs around 20 kgs,

easy to fix or move as needed. 4" 40 density foam for seat, 4" 30

density foam for backrest for comfortable support. Paddle handle

for easy 15-degree reclining adjustment. Upholstered with 100%

polyester material for durability, stain, and fade resistance.

Comes fully assembled, ready to use, with a screw port for

Ideal for theaters and auditoriums, offering comfort, durability,

and ease of use

SOUNDPROOFING WALL PANNELINGS (664.5 sqm) 0.00 0.00

PROVIDING & FITTING WITH FABRIC WITH FABRIC GRIPPER

USING SELLING SECTION AT THE GAPE OF 1200MM PROPER

1 JOINTING & FINISHING USING GLASSWOOL & TERMOSIL SQFT 4200 413.00 1734600.00

FABRIC BETWEEN 150-300/- PER METER AS CHOICE

GRID CEILING 600X600MM PERFORATED TILE FABRIC GRIPPER

USING CELLING SECTION AT THE GAPE OF 1200MM PROPER

2 JOINTING & FINISHING USING GLASSWOOL & TERMOSIL SQFT 952 413.00 393176.00

FABRIC BETWEEN 150-300/- PER METER AS CHOICE

AIR CONDITION 0.00 0.00

Supply of Daikin make Ducted Split Air Conditioner with scroll

compressor and micro processor based controller Inverter Type

1 11 TR. Nominal capacity R 410 Ducted Split Unit Including nos 6 306800.00 1840800.00

Installation, testing and commissioning of the following All

2 Ductable units NOS 6 147067.29 882403.76

SOUND SYSTEM ,SETUP AND WIRING(743 Sqm) 0.00 0.00

2-way, 1000 watt Bi-amped Powered Speaker, Bass-reflex

speaker; Frequency range (-10dB): 50 Hz - 20 kHz; Coverage

area: H90ﾟ x V60ﾟ ; Crossover: 2.1 kHz: FIR-X tuning™ (linear

phase FIR filter); Components: LF: Diameter:15" cone, Voice

1 Coil:2.5", Magnet:Ferrite; HF: Diaphragm:1.4", Type: 1" throat NOS 2 67517.24 135034.48

compression driver, Magnet:Ferrite; Maximum Output Level: 132

dB SPL; Cabinet material: Plastic

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Powered Subwoofer, bass-reflex type, Frequency range (-10dB):

33 Hz - 150 Hz; Components: LF: 15" Cone, 4" Voice Coil, Ferrite

2 magnet; Power rating: 1600 Watt; Maximum Output Level: 136 NOS 2 104517.32 209034.64

dB SPL; Sampling frequency: 96kHz AD/DA Cabinet material:

2-way, 1000 watt Bi-amped Powered Speaker, Bass-reflex

speaker; Frequency range (-10dB): 52 Hz - 20 kHz; Coverage

area: H90ﾟ x V60ﾟ ; Crossover: 2.1 kHz: FIR-X tuning™ (linear

3 phase FIR filter); Components: LF: Diameter:12" cone, Voice NOS 2 48700.96 97401.92

Coil:2", Magnet:Ferrite; HF: Diaphragm:1.4", Type: 1" throat

compression driver, Magnet:Ferrite; Maximum Output Level: 131

dB SPL; Cabinet material: Plastic

2-way, 700 watt Bi-amped Powered Speaker, Bass-reflex

speaker; Frequency range (-10dB): 55 Hz - 20 kHz; Coverage

area: H90ﾟ x V60ﾟ ; Crossover: 2.1 kHz: FIR-X tuning™ (linear

4 phase FIR filter); Components: LF: Diameter: 10" cone, Voice NOS 4 45222.32 180889.28

Coil: 2", Magnet: Ferrite; HF: Diaphragm: 1", Type: 1" throat

compression driver, Magnet: Ferrite; Maximum Output Level: 129

dB SPL; Cabinet material: Plastic

Compact digital mixing console with Input channel: 16 mono + 1

stereo + 2 FX return; Mix Buses: 6; Matrices: 2 (Supports Input

to Matrix); Stereo Buses: 1; FX Buses: 2; Cue Buses: 1; Analog

Input: 16 Mic/Line (12 XLR + 4 XLR/TRS Phones Combo); Analog

Output: 8 (XLR); Network: 1 (RJ-45); USB TO HOST: 1 (USB

Type-B, USB2.0); USB TO DEVICE: 1 (USB Type-A); Phones: 1

(TRS Phones); 1x 9-inch multi-touch screen, 9x faders (8

channels + 1 main), 1x "Touch and Turn" rotary encoder; Can

Record 18 track, Playback 18 track; Sampling frequency rate: 96

kHz / 48 kHz; Total harmonic distortion; Less than 0.01 % 20 Hz

- 20 kHz@+4 dBu into 10 kΩ, INPUT to OMNI OUT, Input Gain=

WOODERN FLOORINGS (STAGE) (167 sqm) 0.00 0.00

WOODEN FLOORING

Plywood core bonded to a thin hardwood layer Lifespan Up to 10

years or more Plywood core bonded to a thin hardwood layer

More water-resistant than hardwood, but not waterproof Sqft 1447 200.60 290268.20

Cleaning-Wet mop allowed Sizes : Thickness: 3/8 to 9/16

width: 2 1/4 to 7 inches,

length: 12 to 60 inches

Projection Screen(46 Sqmm) LS 1.00 767000.00 767000.00

FIRE ALARM SYSTEM & FIRE EXTINGUISHERS 0.00 0.00

Supplying, installation, testing & commissioning of manual call

box of ABS type in surface/recess with stainless steel chain &

hammer assembly complete with glass and push button etc. as

Supplying, installation, testing & commissioning fire alarm

sounder with facility to make announcement, mounted in A.B.S. Each 6.00 610.43 3662.61

box with hinged cover plate & suitable for operation with amplifier

i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning sector panel

suitable for following zones, complete with visual indications for

short circuit fault, open circuit fault, fire condition and all other

standard facilities as per IS:2189 with mimic diagram for all 0.00 0.00

area/zone covered, complete with all connections,

interconnections as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS outer sheath

complete as required.

Supply, installation, testing and commissioning ISI marked

(IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5

Kg. Flat base including valve, discharge hose of not less than 10 Each 6.00 13099.18 78595.08

mm dia, 1M long and complete in all respects including initial fill

with CO2 gas conforming to IS:307-1966 and walll suspension

braket as required as per specifications.

Digitally signed by Rakesh

Sl.no. Description of Items Units Quantity RATE AMOUNT

Supply, installation, testing and commissioning of 6kg ABC

(Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked

fitted with pressure indicating gauge, internal tube, squeeze lever

type valve fully charged with ABC 90 powder (Mono Ammonium Each 6.00 5361.92 32171.52

Phosphate) pressured by Nitrogen complete in all respects

including wall suspension bracket and conforming to IS:15683 as

required as per specifications.

PEST CONTROIL LS 1.00 56602.24 56602.24

GRAND TOTAL 15175938.02

GRAND TOTAL 15175938.02

Digitally signed by Rakesh