Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC SHOP NO 106 1ST FLOOR ASHOKA SHOPPING CENTRE LT ROAD MUMBAI 400001 | MUMBAI | MUMBAI | MAHARASHTRA | 400001 | L1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹12.3 L+₹23,259 (1.92%)Rejected-Finance 45 PIR BABA TARUSHAW ROAD HALWARA AD LUDHIANA 141106 | HALWARA | LUDHIANA | PUNJAB | 141106 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹13.4 L+₹1.2 L (10.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹13.5 L+₹1.4 L (11.5%)Rejected-Finance 1040 12 3 BABA KARAM CHAND STREET NEAR MAHANTA DI KOTHI DORAHA 141421 DISTT LUDHIANA PB | DORAHA | LUDHIANA | PUNJAB | 141421 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹14.6 L+₹2.5 L (20.9%)Rejected-Finance MANDIR ROAD NEW ABADI AKALGARH AIR FORCE STATION HALWARA TEH RAIKOT DISTT LUDHIANA PB 141106 | LUDHIANA | LUDHIANA | PUNJAB | 141106 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
29 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001
REPAIR TO JOINERY AND CERTAIN B/R ITEMS AT BADDOWAL AND MOGA UNDER AGE BR BADDOWAL GE LUDHIANA
2023_MES_600803_1
GE/LDH-20/2023-24
Open Tender
Civil Works
Item Rate
270 days
Baddowal and Moga
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹30,000
Yes
20 Jul 2023
3 Jun 2023
30 Jun 2023
3 Jun 2023
29 Jun 2023
16 Jun 2023
3 Jun 2023 - 15 Jun 2023
Amount
Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exceeding 1 Sqm and n exc 2 sqm each complete all as specified and as directed by Engineer –In -Charge.
Taking down shutter of any description exceeding 2 Sqm each complete all as specified and as directed by Engineer –In -Charge.
S&F for Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc., complete all as specified and directed by Engineer-in-Charge.
S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete 1:3:6 type Co (using 12.5 mm thick stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed.
S&F of factory made plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated all as specified and as directed.
M&L for 35mm thick factory made glazed and skeleton shutters,2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.
S&F for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and directed. .
S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
S&F for sheet glass 5.5mm , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified & directed by Engineer-in- charge.
Taking down existing Aluminum door shutter and adjusting the floor spring, locking devices, towerbolts and oiling the components and refixing the same on same opening and making smooth function of the door etc complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but not exc 2 sqm and refixing the same opeing after resecuring or easing and adjusting etc complete all as specified and directed.
All as per item No 16 above but exceeding 2 sqm complete all as specified and directed.
S&F in repairs Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white,fixed in frame, complete all as specified and as directed by Engineer –In -Charge.
M&L for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.
All as item No 19 above but fixing with wire mesh.
M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165.
Hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete.
M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed by Engineer-in-Charge.
S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.
S&F in Aluminium handles, cast type, anodised 150mm long completed all as specified and directed.
S&F for 300 mm long ordinary rat tail rod paltren spring incl roller and roller plate complete (Mild steel)
S&F for 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed by Engineer-in-Charge.
S&F for 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed by Engr-in-charge.
S&F for door closer aluminium (Die cast) body hydraulically regulated designation No. 2 universal type, suitable for door shutters of 36 to 60 Kg (Cast iron body) etc complete all as specified and directed.
S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surface of any description two coats of synthetic enamel paint over a coat of pink primer including prepration to new wooden surfaces exc.10cm in width or girth complete all as specified and directed by Engineer-in-Charge.
M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer - in -Charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer - in -Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as spd & directed.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth with out using extra cement complete all as specified & directed.
M&L for preparation of new plastered surfaces of walls of any description and applying two coats of distempering of wall with distemper oil emulison (any tint) complete all as specefied and directed.
CHOUDHARY ENTERPRISES
JAI DURGA CONSTRUCTION COMPANY
M/s R.N Construction Co.
Kular and Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .