Construction of External development such as Parking Pathway Drain Horticulture and Landscaping

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments ,sundries and T&P etc all complete as per the direction of Engineer-in-charge.

Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance and taxes ,sundries ,T & P, complete as per the directions of Engineer-in-charge.

Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping site or as approved /directed by Engineer-in-charge, including all lead and lifts involved, labour, etc. including all taxes as per the direction of Engineer-in-charge.

Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.

Providing and laying of Cement Concrete of grade 1: 4 :8(1 cement : 4 sand : 8 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and ,sundries ,T & P etc. complete as per the directions of Engineer-in-charge.

Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make,design,colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRCSP63:2018

Supplying and fixing of pavit tile (300x300mm ) approved make,design,colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRCSP63:2018

Supplying and fixing of machine cut decorative laterite stone paving of approved size ,design,colour and size made by block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRCSP63:2018

Supplying and fixing of precast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make ,design,colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984

Providing and laying 150mm uniform thick 'Tremix / VDF flooring' with plain cement concret of M-25 grade (Minimum cement content 406 Kg/cum) in alternate panels of 4M x 3M using with 20mm and down grade black hard granite crusher broken stone chips including the cost of screed board vibrator, placing of filter mat, top mat,Vacum process, power troweling, brooming, T&P charges including power, loading, unloading and hire charges, making grooves of 6mm wide and 25mm deep @ 1.5 M C/C bothways, filling the joints with approved qunlity sealing compound '' Grade A'' including the cost of all materials, cost of labours, conveyance, royalty, labour ces, etc., complete as per the specifications and direction of Engineer -in-charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Dismantling and removing cement plaster from wall(9.30 Sqm) including stacking the useful materials for reuse and removing the debries within 50mtr

Providing 12mm thick cement plaster in cement mortar (1:4) with mixing of water proofing compound to the surface of half brick masonry wall including racking out joints,scraping and cleaning the surface and finisjing the plaster surface smooth using wooden floats ,bars, etc only to proper plumbs and level making grooves,beads and drip courses to give required ornamental finish as per the drawings including cost of all materials,conveyance,loading and unloading ,royalties, cost of all labours ,materials, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge .

Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works as per IS Specification, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but excluding cost of Reinforcement and Binding wires etc.

Footing

Column

Plinth Beam

Coping

REINFORCEMENT :- Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)

Laterite masonry work of approved size machine cut decorative type Laterite stone in cement mortar (1:4) mixed with pigment to match the shade of the stone ,including washing and cleaning etc.as per the architectural drawing . including cost of all materials, labour, conveyance, loading & unloading, taxes, roylalities, watering, curing, sundries, T&P etc., complete as per dorection of the Engineer-in-chage.

Providing and Fixing Unistone or equivalent premium Da Vinci Cultured Stone in Laterite natural stone pattern & shade & approved size in 15 mm thickness, ± 2mm accepted tolerance along with corner pieces at all corners of building in sizes, as available with manufacturer. The pattern should replicate natural stone appearance using differential textured mould technique and pigmentation should be done by infusion methodology to infuse surface with authentic natural tones. Dual or triple tone shading cultured stone should be casted using homogenous base pigmentation with top layer differential shade penetration technique to simulate ultra‐ realistic natural stones. The pattern should have variation in shade and have hints of rust, rust browns, copper, umbers and deep yellows to simulate actual stone. The material should be casted in controlled production environment concrete mix design with high pressure vibratory methodology, 43 – grade OPC white Cement, reinforced with Alkali Resistant Glass fibre1.5 %, The glass fibre shall be alkali resistant (AR) with minimum Zirconium Dioxide (ZrO2) content of 16% and shall be manufactured by approved manufacturer as per specification of approved make i.e., by M/s N.E.G Japan or Owens Corning. The stone cladding cultured stone should be pigmented with synthetic mineral iron oxide non fading weatherproof, UV resistant pigments of M/s Phenochem, Lanxess or equivalent and it. The product should be applied on rough plastered substrate (1:3) Cement and Coarse Sand and should be applied with Unistone ‘Ultimate’ or equivalent Exterior Grade high strength cementitious polymer modified tile adhesive having tensile adhesion strength ≥ 2.5 N / mm2 as per EN ‐1348. The product should be applied with adequate grooves and all horizontal and vertical grooves to be filled and pointed with a mix of fine sand and cement in ratio (3 Fine sand: 1 Cement). All work should be carried out as per manufacturer’s and as per direction of Engineer in charge.

Supplying, Fitting and Fixing M.S Grill gate of approved design made out of M S Flat, Square bars/Round bars etc. of approved specifications / dimensions with necessary welded clamps fixed in proper position & plumb including a single coat of priming of approved quality metallic primer, making required holes in Masonary Walls / R.C.C Structures (where necessary) and grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips, making good to the damages of Masonary Walls / R.C.C Structures including cost, conveyance, loading, unloading,stacking, royalties and taxes of all materials , cost of all labours, staging, scaffolding, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even finish with two or more coats on new work of steel over a coat of suitable shade with primer of approved brand and manufacturer's instructions including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat (Two or more coats ) of exterior primer applied @ 0.90 litre/10 sqm.

Providing Two coat of Textured paint of approved make, quality and shade over the wall surface of the building over (Two or more coats ) of primer of approved make including cost of material, brushes, all labour, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use)

Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) ,mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period, including all cost of labour ,material, conveyance,royalties and sundries , T&P etc. complete as per the direction of Engineer-in-charge.

6MM THICK CEMENT PLASTER (1:4) :- Providing 6mm thick cement plaster with cement mortar of (1:4) with mixing of water proofing compound to RCC surface of roof slabs ceilings , stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge.

Waterproofing application:- Providing and application Two component, cementitious acrylic polymer based high performance water proofing coating AquaArm 2C at a coverage of 2Kg mixed material/Sqm for 1 mm DFT The membrane will have the following technical parameters: Elongation : 80% Crack Bridging abilty : Up to 1 mm UV Resistant : Yes Tensile Strength : 0.4 N.mm2 Pull out bonding strength : 1.5 N mm2 Concrete failure Sq.Mtr Page 4 4 Joints Treatment: a) Cut the wall floor joint of swimming pool on 4 sides by 10 mm x 10mm and shall be treated with ReArm Bond 4031 b) Filling of the joint with ReArm Bond 4031 may be carried out once the surface preparation has done. c) The surface of the applied ReArm Bond 4031 can be subsequently smoothed, i.e. before it has formed a skin, with soapy water and a suitable tool. Hereby the material is pressed in the joint and onto the contact surfaces. Protective cover is in client scope.

Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineerin- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing and Fixing Unistone or equivalent premium Da Vinci Cultured Stone in Laterite natural stone pattern & shade & approved size in 15 mm thickness, ± 2mm accepted tolerance along with corner pieces at all corners of building in sizes, as available with manufacturer. The pattern should replicate natural stone appearance using differential textured mould technique and pigmentation should be done by infusion methodology to infuse surface with authentic natural tones. Dual or triple tone shading cultured stone should be casted using homogenous base pigmentation with top layer differential shade penetration technique to simulate ultra‐ realistic natural stones. The pattern should have variation in shade and have hints of rust, rust browns, copper, umbers and deep yellows to simulate actual stone. The material should be casted in controlled production environment concrete mix design with high pressure vibratory methodology, 43 – grade OPC white Cement, reinforced with Alkali Resistant Glass fibre1.5 %, The glass fibre shall be alkali resistant (AR) with minimum Zirconium Dioxide (ZrO2) content of 16% and shall be manufactured by approved manufacturer as per specification of approved make i.e., by M/s N.E.G Japan or Owens Corning. The stone cladding cultured stone should be pigmented with synthetic mineral iron oxide non fading weatherproof, UV resistant pigments of M/s Phenochem, Lanxess or equivalent and it. The product should be applied on rough plastered substrate (1:3) Cement and Coarse Sand and should be applied with Unistone ‘Ultimate’ or equivalent Exterior Grade high strength cementitious polymer modified tile adhesive having tensile adhesion strength ≥ 2.5 N / mm2 as per EN ‐1348. The product should be applied with adequate grooves and all horizontal and vertical grooves to be filled and pointed with a mix of fine sand and cement in ratio (3 Fine sand: 1 Cement). All work should be carried out as per manufacturer’s and as per direction of Engineer in charge.

suppying, fitting and fixing 16-18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite slab for plantor box wall, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement :4 coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups,includibg rubbing, curing, moulding and polishing to edges to give higher gloss finish etc complete at all levels

Providing and laying Kota Stone Flooring using Kota tiles of area above 0.10 sqm of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance,royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Note- Sample of tiles shall be approved before procurement and use.

Preparation of fabrication drawing (shop drawing approved by EIC) and supply ,fabrication , erection,testing & commissioning of structural steel work (YST-310) in built up (round,square,rectangular hollow tubes etc.) etc. inlcuding cutting,hoisting,fixing in position and painting with one coat of red oxide primer and two coats of enamel paint,including cost of all material,labours, all consumables,all required plants & machinery etc all complete as per the direction of Engineer-in-charge.

Providing and fixing CNC aluminium jali of approve size and specification etc. including cost of all labour ,material ,loading and unloading etc all complete as per the direction of Engineer-in-charge.

Supplying and fixing of Concrete benches of of size 4ftx 2ft without arm set etc. including cost of all labour, material, loading and unloading, conveyance,T&P etc. all complete as per the direction of E-I-C.

Supplying and fixing of 120 Litre of different colour Plastic Wheel Dustbin, WB120L, Dimension: 92x48x55 cm.etc including cost of all labour,material loading,unloading,taxes etc.all complete as per the direction of E-I-C.

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge

Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm

Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm

Wayfinding signage: Mild steel panels (with/without wrought iron frame) screwed directly on wall. Text printed digitally H1625 -RS printed on micro prismatic retro reflective boards conforming to type XI DG3 (diamond grade) 4000 series. Text language: Odia and English. Text height: Odia 40-45 mm English 40 - 45 mm Century 30 -35 mm. Icon height: 155 -175 mm as per drawings & direction of Engineer in charge.

Story signage: DG3 digital printing series (super high efficiency reflective sheeting) with alphabets/ numerical/ pictorials digitally printed and laminated using 1170c laminate in matt finish. The base corresponds to a specific kind of pedestal i.e. Kani Pista, with three mouldings with 4:5:6 proportion. Concrete structure with text etched and painted on top. Sandstone cladding at the base text. Language: Odia and English. Text height: Heading - 10 mm Supporting text - 8 mm as per drawings & direction of engineer in charge.

Cultural marker: Providing and fixing 600 x 600 x 1800 mm (LXWXH) culture marker made of stone block with CNC etching and carving designs fixed over MS support structure made up of 150 X150 mm MS pipes with weather proof paint and primer fixed on the sub structure inclusive of all necessary hardwares to make structure stable as per site with complete base work and foundation and research, scriptwriting, proofreading and copywriting of all the content in 3 language (Oriya , Hindi & Englidh )with designing the and developing the infographics of all the graphical representation, illustration, theoraticaland textual content placement of provided content along with development of print ready files for the fabrication and production as/design/drawing with complete work as per site engineer incharge.

Providing and laying cement concrete 1:2:4 on walls (any thickness), including the cost of centering,shuttering and finishing :including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer -in-charge

Design supplying Filling and Fixing with M.S Built-up Fabricating erecting Tensile Fabric Roofing including wires, cables chemical fasteners shackles, rigging screws, clamps, tensioning hardware and also including fabricating assembling, hosting, erecting and inpostion placing section/TubularJ Structure (MS) Round Square Jor Rectangular Hollow tubes etc, trusses etc, with welding and bolted with special shaped washer and suppling. fitting, fixing with fabricating erecting Tensile Fabric Roofing including wires, cables chemical fasteners, shackles, rigging screws, clamps tensioning hardware etc, of approved brand and make and including cost, conveyance and taxes of all materials etc, for the work complete as per direction of the engineer -in- charge. Tensile Fabric should be of specification as under (Serge Ferrari, france) or Equivalent with both side JPVDF coat technical properties, (5% variation acceptable)Yarry 1100 die CR treatment weight 950g/sqm, width 267cm-105 inch, Tensile Strength 3000/2800 N/sqm (WRAPWEFT), Tear Resistance: 300N WRAP WEFT) Adhesion 120N/SCM surface treatment : weldable fluorinated varnish, light transmission 12.5% Flame ret ardency M2/NFP92-507 x PESHT CSFMT 119. BIDIN4102including cos and taxes of all materials conveyance royalty cost of all labour, T&P etc, as required for th work complete .

Providing all labour, material for painting mural art as per the direction of Engineer-in-charge. Etc all complete

Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete

Supplying and stacking sludge at site including royalty and carriage upto 5 km complete

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)

Planting of Fox tail palm 7'0' ht.ornamental decorative specimen plants well established healthy disease free in poly bag / big container including transportation and delivery at sites.Planting of each plant at specified location by application of fortilizer and pesticide as required as per instructio of Officer in-charge.This cost is including hoeing soil of size 3'dia and 3' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . a) plant 5.3,p-324=Rs.1183.00, stacking 7.44,p-349= Rs.650.00, digging hole 2.14.1,p-218= Rs 214.77, antitermite 2.54,p-246=Rs.92.68, shaping 2.38,p-236=Rs.53.60, cattle manure 2.25,p-224=Rs.374.12, fencing 2.23Sqm 2.58,p-248= Rs. 193.58x2.23= Rs 431.68 Total cost=2999.85(say Rs.3000.00)

Supplying planting of fruit plants including digging the pit & required quantity of fertilizer & pesticides such as mango water apple, jack fruit,guava, custand apple,count., lichu, jamun,star fruit,tamarind,citrus lime,sapeta etc. Two to three year olds slpping at least two to six ft height depend on species as per direction of E.I.C.

Supplying & planting of Flower plants including digging the pit & required quantity of fertilizer & pesticides such as Hezej & Zasmine two to three year olds slapping at least two to three ft. height depend on species.

Maintenance Per Month including fertilizer pesticide, man power,grass cutting, straining, Seasonal flower all etc.

Providing, laying & jointing in position PVC pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction,

PVC pipe 63mm-6 kg/cm2

PVC pipe 50mm-6 kg/cm2

PVC pipe 40mm-6 kg/cm2

Earth work excavation and refilling 300x450mm

Providing & fixing of PS- Ultra, Pop up spray head bodies, having features an encased plastic 'cage' to provide unmatched resistance to grit,with high efficiency ADJUSTABLE nozzle capable of covering 1.2M -5.2m at 1.0 - 2.1 Bars, pressur. Additionally Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic.

Providing & Fixing of SJ- 512, 1/2" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic.

Providing and fixing of PP service saddle of varying size.1/2'

Providing & fixing of Isolation Valve in mainline for bypass and flow diversion of approved quality 63 MM

Providing and fixing of Isolation Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve of size 63mm.

Providing & fixing of a double acting 1" Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Including service saddle and riser assembly.

Providing & fixing of 12" Rectangular Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout

Providing & fixing of 6"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout

Providing & fixing of Brass Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring. Including service saddle and riser assembly.

Providing & fixing of Brass Key threads into top of QCV to provide water access And Brass Swivel Elbow

Providing & Fixing of Filter filtration with capacity matching pump design flow having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working presure of 10 Bars. with pressure gauge (20M3).

Providing & Fixing of VFD pumpset of having discharge of 3.56 lps@ 52 to 55 mtr head with NRV, control valve, control panel mounted on a common base skid with required size of pressure vessel etc complete.

Providing & Fixing of GI Suction ,Delivery & Header Pipe

Providing & fixing of Butterfly Valve in mainline for bypass and flow diversion of approved quality

Providing and fixing of Pressure Release Valve

Supply of Direct burial 14 AWG x 1C cable Common Wire

Supply of Direct burial 14 AWG x 1C cable Live Wire

PVC conduit Pipe complete 32 mm

Supply of X-Core: RESIDENTIAL/LIGHT COMMERCIAL CONTROLLERS 230 VAC outdoor mount with 230/240 VAC internal transformer control system , Built in Solar Sync, Easy Retrive Memory QuickChekTM Seasonal Adjustment,Sensor Programability (8Station)

Supply of 2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible with and slow closing to prevent water hammer,pressure rating upto 10 bar with 24AC solenoid, with provision to attach Pressure Regulator

Supply and fixing of direct bury -on wire connector with strain relief , with waterproof silicon sealant.

Supply and fixing of SOLARSYNC COMPATIBLE WITH PRO-C, ICC AND I-CORE CONTROLLERS, COMES COMPLETE WITH SENSOR PLATFORM AND CONTROLLER INTERFACE, AUTOMATICALLY RESPONDS TO LOCAL WEATHER CHANGES .

Please Enable Macros to View BoQ information

Compatibility Report for BOQ_494375.xls

Run on 2/3/2025 19:31

If the workbook is saved in an earlier file format or opened in an earlier version of Microsoft Excel, the listed features will not be available.

Significant loss of functionality

Any effects on this object will be removed. Any text that overflows the boundaries of this graphic will appear truncated.

Excel 97-2003

Some cells in this workbook contain data validation rules, which refer to values on other worksheets. These rules won't be saved.

Excel 97-2003

Minor loss of fidelity