Civil Maintenance Works at BARC Staff Colony and Warehouse Tarapur.

Amount

Lead charges for lead exceeding 1 KM but Nost exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. (a) for soil

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Labour charges for murum filling under floors of specified thickness in layers of Nost more than 150 mm thickness including supplying required materials and consolidation etc. complete (Using murrum avilable at site)

Lead charges for lead Exceeding 1 KM but Nost exceeding 2 KM, by mechanical transport including loading, unloading, stacking /levelling etc. and as directed by Engineer-in-charge. Debris beyong 1 Km to but upto and including 2 KM

Providing and laying in position cement concrete of 1:3:6 (1cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels and as directed by the engineer.

Providing and laying in position cement concrete of 1:2:4 (1cement, 2 crushed sand, 4 graded stone aggregate of Nosminal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels and as directed by the engineer

Providing and laying in position Cement Concrete of 1:1.5:3 at all level (1 cement,1.5 crushed sand,3 graded stone aggregate of nominal size 20mm) , including consolidation, finishing, curing etc, complete as per specifications and grawing but excluding the cost of shuttering centering and steel reinforcement.

Providing , centering ,shuttering Form work by using steel plates, timber planks for PCC and miNosr structures including necessary strutting, proping, without staging, supports etc and deshuttering the same after the specified time all as per drawings,specifications and as directed by the Enginner-in-charge

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor manufactured by other than SAIL, RINL or TATA and approved brands of BARC only Steel supplied by the contractor

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, moNosrails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers. (ISI marked other than SAIL / RINL/ TATA) All test reports to be provided along with the supply of the materials

Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge

Providing and fixing precoated galvalume Roofing profiole sheets pof approved size , shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55 mm ) with EPDM seal or with polymer coated J or L hooks, bolts and 8mm diameter withbitumen and G.I. limpet washers filled with white lead complete upto any pith in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge Galvalume sheet roofing 0.50 mm Thickness in single sheet

Providing & fixing in position suspended seamless false ceiling system using 12.50 mm thick moisture resistant plain gypsum board (GyPROC.MR of M/s Saint Gobain make) suspended ceiling, which includes Gypsteel ULTRA™ CRP surface ribbed perimeter channels (having one flange of 20mm and aNosther flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610 mm centres. Then suspending Gypsteel ULTRA™ CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with Gypsteel ULTRA™ CRP surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners(Mfg by Ms Saint Gobain Gyproc). Gypsteel ULTRA™ CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the Gypsteel ULTRA™ intermediate channel with the help of connecting clip and in direction perpendicular to the Gypsteel intermediate™ channel at 457.5 mm centres. Single layer of 12.5mm tapered edge Gyproc® MR (conforming to BS 1230 patrt 1) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc jointing compound, Gyproc joint paper tape and two coats of drywall top coat (as per recommended practices of M/s Saint Gobain Gyproc India).

Provding and constructing brick work in Cement mortar using standard bricks of approved class/ quality, make or brand in foundation and plinth including curing, raking out joints, simultaneous pointing below plinth level if specified, complete as per drawings, specifications and as directed by the Engineer-incharge Brick work in C.M 1:6 using crushed sand.

Providing and constructing Half brick masonry using bricks of approved quality / class, brand/ make in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-incharge but excluding reinforcement up to plinth level and as directed by engineer. (Reinforcement will be paid under relevant item)

Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications and as directed by EIC.

Providing Raised and cut pointing on stone with cement moratr 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.

Supplying , cutting to shape and fixing 90 mm dia diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site and as directed by EIC

Providing 15 mm thick Internal plaster in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing 20 mm thick water proof plastering in cement mortar 1:3 (using crushed sand) finsihed smooth with a floating coat of neat cement including approved water proofing compound added @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, preparation of surface, scaffolding at all heights, curing all as per specifications, drawings and as directed at site.

Providing and laying (IPS Flooring) cement concrete flooring 1:2:4, using crushed sand 50 mm thick finished smooth to the required level, finishing with a floating coat of neat cement including cement slurry, curing, cleaning the surface neatly at the time of handing over the area complete as per specifications and drawings as directed by the Engineer in charge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness Not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed / Anti skid floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness Nost less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and fixing minimum 17 mm thick gang saw cut mirror polished granite (premoulded and prepolished) machine cut ZEBRA BLACK colour granite for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-incharge at all levels

Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with Nost less than 17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings and as directed by EIC.

Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 Nosn-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws, 1Nos. aldrop, 1 Nos. tower bolt, 1 Nos. handle, 1 Nos. doorstop complete.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) and as directed by EIC 1.1) extra for colour 1.2) anodized aluminium section (minimum anosdizing thickness of 15 micron)

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) with tinted colour float glass of 5 mm thickness.

Manufacture, supply and installation of louvers made of 4 mm thick aluminium composite panels of approved make in the external vertical face and flush with the facade system for inlet of fresh air as per the design / details including all necessary aluminium (with minimum 25 micron thick aNosdisation) frames, frosted glass in louvers and fixing portion, sub frames, peripheral flashings to avoid any ingress of water inside the building with stainless steel bird wire mesh on the inside etc. complete as per details in approved shop drawing and specifications and as directed by EIC

Providing and fixing 30 mm thick FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws

Providing and fixing Fiber letter box including cost of all spare parts , having lock with three keys (one year warranty ), screws bolts and fixing other all materils disposal of existing materials to EMC (civil) stores, design and drawing approved by Engineer-in-charge.

Providing and fixing stainless steel (SS 304 Grade) 355 x 19 mm adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge

Providing and fixing IS:12817 marked stainles steel butt hinges of size 100 x 60 x 2.5mm (heavy weight) of approved make with stainless steel screws etc. complete as directed by the Engineerin-charge

Providing and fixing aNosdised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing aluminium aldrops of size 250 X 16 mm ISI marked aNosdised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing anodized aluminium baby latch of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters.

Providing and fixing approved make 7 lever night latch with triplicate keys including necessary screws etc in wooden doors complete all as directed at site

Providing and fixing Godrej make Ultra twin bolt locking system (model : 1CK) keys including necessary screws etc in wooden doors complete all as directed at site

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anosdised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, aNosdised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Providing and fixing 25 mm S.S. curtain rods of 1.25 mm thick with two brass brackets fixied with brass screws and wooden plugs etc. wherever necessary complete.

Providing, Painting on old work (two coat) with oil bound washable distemper of approved brand and manufacturer to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineerin-charge

Providing and painting old walls (TWO coats) over existing cement paint surface on plain / sand face plaster & concrete surfaces with premium acrylic smooth exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and fixing square mouth 150x 100 mm size gully trap P type S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be Nost less than 4.5 kg and frame to be Nost less than 2.70 kg as per standard design and as directed by the Engineer-in-charge.

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 Nos 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

Providing and fixing Chlorinated Polyvinyl chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer In Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) single socketed pipes 75 mm diameter

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) single socketed pipes 110 mm diameter

Providing , Laying , jointing, fixing and testing Heavy quality (CClass) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipe

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

Removing the damaged brass ball valve, providing and fixing new brass ball valves of approved make as directed by engineer - in-charge

Providing and fixing 100 mm dia S.S. jali of approved make or as directed by engineer in charge

Providing and fixing 125 mm dia S.S. jali of approved make or as directed by engineer in charge

Removing the damaged G.M. gate valve, providing and fixing new GM gate valves of approved make with handle wheels as per IS; 778

Providing and fixing 15 mm dia C.P brass heavey quality bib cock of approved specified make as per specification and as directed by the Engineer-in-charge

Providing and fixing 15 mm n.b C.P Brass open stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

Providing & fixing C.P brass 2 way Angle cock (2 Angle cock combination in single fitting) of heavy quality of approved make as per specifications and as directed by the Engineer-In-Charge.

Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brasss unions and nuts 15mm dia 600 mm long

Supply and fixing heavy quality hot and cold mixture valve of approved make includng cost of material and labour charge approved by Engineer-in-Charge

Removing the following sizes of damaged G.I fittings from G.I pipe lines, replacing the damaged fittings with new fittings, testing for leakage etc. complete as per specifications and as directed by the Engineer-in-charge.

25 mm G.I elbow, bend, nipple, socket, tee and other G.I spare parte etc.

32 mm G.I elbow, bend, nipple, socket, tee and other G.I spare parte etc.

40 mm G.I elbow, bend, nipple, socket, tee and other G.I spare parte etc.

Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make Aquaseal model with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in charge.

Providing and fixing Indian water closet (Orissa pan) size 580 x 440 of apperoved make with 100 mm white vitreouws China ware P or S trap, connection pipe from flushing cistren to W/C pan One Nos. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures, bracket of flushing cistren complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge

Providing and fixing white vitreous china ware white colour European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge

Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, M.S. brackets etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing viterious white colour 630 x 450 mm China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600/1000mm long PVC Inlet connection, PVC flexable pipe, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

Providing and fixing Satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 545 x 445 x 200 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Heavy quality flexible PVC waste pipe of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick plywood sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 150 X150 mm soap dish of white viterious Chinaware, of approved make including chasing walls making good the same after fixing the China Soap dish etc. complete all as per specifications and as directed by the Engineer-in-charge

C.P Brass Waste coupling of approved make Half threaded or Full threaded as per requirement

32 mm dia

38 mm dia

Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge

Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge

HDPE CYLINDRICAL vertical storage water tank 1000 lit capacity

HDPE CYLINDRICAL vertical storage water tank 2000 lit capacity

Dismantling plain cement concrete/ RCC manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below and as directed by engineer.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm

Dismantling roofing including ridges, valleys and gutter etc and stacking the material within 50 m lead and as directed by engineer G.S Sheet / FRP Sheet / AC Sheet

Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge

Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead and as directed by engineer-in-charge

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including scaffolding disposal of rubbish to the dumping ground within 100 m lead

Supplying of following material to department for day to day maintenance work by departmental persons use including all charges and as directed by the Engineer - in - charge.

Hire charges for Hydraulic excavator with fuel and driver when required for department

Hire charges for truck with driver

Supply of cement

Supply of crushed sand

Supply of 20 mm Aggregate

Supply of 10mm Aggregate

Supply of white cement

Supply of stone dust

Supply of bricks

Supply of waterrpoofing compound

Supply of white lead/ glass putty

Plaster Of Paris

Wall putty

6mm thick plywood

9mm thick plywood

12mm thick plywood

18mm thick plywood

S.S. Screws 20 mm

Godrej letter box locks

Acrylic washable distember

Synthetic enamel paint

Cement primer/ Enamel paint thinner

Fevicol Glue

Wire brush with wood handle

Soft brush (us per size )

supply of HCL Acide

Supply Costic soda in liquid

Supply of cotton hand gloves

Aluminium baby latch

M-seal

Supply of C.I./ M.S. various size brackets (size )

Supply of Shahbad stone rough 40mm thick

Supply of PVC hand gloves

M.S. Roller wheels for parking barrigate

S.S. Mesh - (mosquito net) - 0.55mm thick 144 apeture in sq. inch

80 mm dia G.I. 'C' class pipe Non TATA make JINDAL heavy

Supply of METRO POLE flush valve 32 mm jaquar make

Supply of METRO POLE flush valve 40 mm jaquar make

pad lock Godraj make

Bib tap spindle(Jaquar/Secko)

6mm thick nylon rope colour and quality approved by EIC

Chouke Remover 4"

Chouke Remover 6"

Taflon Tape

star lock

Pillar cock and bib tap washers

15 mm Float valve for over head tanks

20 mm Float valve for over head tanks

25 mm Float valve for over head tanks

Roller wheels for aluminium sliding windows/shutters

White glazed vitreous china Orissa Pattern W.C. of size 580 x 440 mm

40 mm dia PVC pipe 6kg/cm2

40 mm dia PVC pipe 6kg/cm2 parts bends, tee, coupling and other parts

Paint stainers of various colours (50ml each)

Coat hooks (hanging hook)

2 in 1 Bib cock & Angle cock -plato/ESSCO

Chemical water proofing compound of No- 1 Indo fill primmer MC- 76

Chemical water proofing compound of No- 1 Indo fiil flexcoat

Supply of 40 mm aggregate

Providing service and repairing of gas and arch welding machines, G.I. threading machine, G.I. and M.S pipe cutting machine, wood cutting machine etc. complete witnh repair and replacement new spare parts, oiling, greasing and other allied work including cost of labour and materials as per direction of Engineer-in-Charge.

RAUT ENTERPRISES