Fixation of contract for various works under 4 No. of Water Supply Schemes

Amount

Adijan Gadipora (Rs. 332.10 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329.

200 mm dia Ductile Iron Class K - 7 Pipes

150 mm dia Ductile Iron Class K - 7 Pipes

100 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

200 mm dia

150 mm dia

100 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete:

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

200 mm dia.(Class I)

150 mm dia.(Class I)

100 mm dia. (Class I)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

80mm nominal bore

65 mm nominal bore

Providing & fixing of M.S Flanged joints 12mm thick including cost , nuts, bolts, washers and all sorts of carriages involved up to the site of work. Complete job.

150 mm dia

100 mm dia

80 mm dia

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : (The unserviceable material shall be returned to Divl. Store under proper R.I).

15 mm to 40 mm nominal bore.

Above 40 mm nominal bore.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Supplying,Installation,Commissioning and Testing of Electromagnetic Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,wiring from panel board to site of installation complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

200 mm dia

150 mm dia.

100 mm dia.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Arches, domes, vaults upto 6 m span

Suspended floors, roofs, landings, balconies and access platforms.

Extra for shuttering in circular work (20% of respective centering and Shuttering items).

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Providing/Fabricating,, fixing of M.S fittings viz bends, Tees,nipples double collars, tail pieces of suitable degrees to be fabricated from 6mm/8mm thick M.S plate as per the requirement of site. This item also includes cost of spun yarn with insertion of spun yarn including welding charges,cutting,threading ends etc. The work should be leak proof . The job is to be paid in fitted and finished form and is to be carried out as per the directions of site in charge.complete job.

De-silting of SSFP's / PSTs /chambers by way of removing of silt & filter media by manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job.complete job.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Design,Construction,Testing,Successful Commissioning of 0.145 MGD RSFP including flash mixer,Clariflocullator,filter room with filter beds including cost of all electro-mechanical works ,chemical and Bacterioligical treatment including necessary laboratory items,pipe work,cost of pipe specials ,fittings ,extension rods,valves,bends complete job.The cost includes installation of 100 KVA electric sub-station with a suitable size bed, inlet power supply control panels.The Filter Beds should be designed with adequate under drainage and disposal system,complete backwash system, filter media etc.The filter building should be designed with care for Architectural and aesthetic considerations having sufficient space for storage operators room,testing room with washroom facilities including septic and soakage disposal systems incl all internal and external lighting and plumbing arrangements and floor matting wherever required.The Building should be so designed with adequate high rib colour coated laminate roof on structural srteel truss.The building should be provided with powder coated Aluminium doors and windows with a collapsible front shutter door.All the electro-mechanical fittings,accesssories,equipments should be from standard approved reputed manufacturers/brand to be approved by the Engineer.The job includes the cost of soil testing,concrete cube testing,painting ,polishing ,Tile work,granite/marble flooring incl plinth protection,levelling and dressing arond the structure and construction of approach path of interlocked tiles of avg. 50m length and 3m width.Scope also includes approval of Design from DIQC.Complete job.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel from nearest source for an avg. lead of 10kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 15 km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

Dangam Ratnipora (Rs. 579.10 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329.

250 mm dia Ductile Iron Class K - 7 Pipes

150 mm dia Ductile Iron Class K - 7 Pipes

100 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

250 mm dia

150 mm dia

100 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

80 mm dia. Gl pipe

65 mm dia. Gl pipe

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete:

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

250 mm dia.(Class I)

150 mm dia.(Class I)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

80mm nominal bore

65 mm nominal bore

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : (The unserviceable material shall be returned to Divl. Store under proper R.I).

15 mm to 40 mm nominal bore.

Above 40 mm nominal bore.

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Supplying,Installation,Commissioning and Testing of Electromagnetic Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,wiring from panel board to site of installation complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

250 mm dia

150 mm dia.

100 mm dia.

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

De-silting of SSFP's / PSTs /chambers by way of removing of silt & filter media by manual means using Rope and Bucket method. The job includes washing and cleaning of walls, dewatering including all leads and lifts , carriage of silt for its disposal within 50mtrs lead incl. cost of all T&P required for the completion of the job.complete job.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Design,Construction,Testing,Successful Commissioning of 0.28 MGD RSFP including flash mixer,Clariflocullator,filter room with filter beds including cost of all electro-mechanical works ,chemical and Bacterioligical treatment including necessary laboratory items,pipe work,cost of pipe specials ,fittings ,extension rods,valves,bends complete job.The cost includes installation of 100 KVA electric sub-station with a suitable size bed, inlet power supply control panels.The Filter Beds should be designed with adequate under drainage and disposal system,complete backwash system, filter media etc.The filter building should be designed with care for Architectural and aesthetic considerations having sufficient space for storage operators room,testing room with washroom facilities including septic and soakage disposal systems incl all internal and external lighting and plumbing arrangements and floor matting wherever required.The Building should be so designed with adequate high rib colour coated laminate roof on structural srteel truss.The building should be provided with powder coated Aluminium doors and windows with a collapsible front shutter door.All the electro-mechanical fittings,accesssories,equipments should be from standard approved reputed manufacturers/brand to be approved by the Engineer.The job includes the cost of soil testing,concrete cube testing,painting ,polishing ,Tile work,granite/marble flooring incl plinth protection,levelling and dressing arond the structure and construction of approach path of interlocked tiles of avg. 50m length and 3m width.Scope also includes approval of Design from DIQC.Complete job.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel from nearest source for an avg. lead of 10kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 15 km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

Wangipora Ist & Muradpora Chako (Rs. 413.49 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :

Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329.

200 mm dia Ductile Iron Class K - 7 Pipes

150 mm dia Ductile Iron Class K - 7 Pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes orDuctile Iron Pipes including testing of joints and including the cost of rubber gasket.

200 mm dia

150 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings of reputed make excluding trenching and refilling etc. (external work)

80 mm dia. Gl pipe

65 mm dia. Gl pipe

50 mm dia. Gl pipe

40 mm dia. Gl pipe

25 mm dia. Gl pipe

20 mm dia. Gl pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete:

25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).

200 mm dia.(Class I)

150 mm dia.(Class I)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):65 mm nominal bore

Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.

Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.

Supplying,Installation,Commissioning and Testing of Electromagnetic Flow Meters of ISI/ reputed Make (.The item includes fabrication of M.S tail pieces,flanges ,nuts bolts,R.I cloth etc, cutting of existing supply line,welding,wiring from panel board to site of installation complete as per requirement of site incl cost of RCC protective chamber of suitable size incl cost of M.S covers,ladders etc .complete job.

200 mm dia

150 mm dia.

100 mm dia.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Arches, domes, vaults upto 6 m span

Extra for shuttering in circular work (20% of respective centering and Shuttering items).

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Extra for arches, domes, vaults exceeding 6 m span

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Design,Construction,Testing,Successful Commissioning of 0.152 MGD RSFP including flash mixer,Clariflocullator,filter room with filter beds including cost of all electro-mechanical works ,chemical and Bacterioligical treatment including necessary laboratory items,pipe work,cost of pipe specials ,fittings ,extension rods,valves,bends complete job.The cost includes installation of 100 KVA electric sub-station with a suitable size bed, inlet power supply control panels.The Filter Beds should be designed with adequate under drainage and disposal system,complete backwash system, filter media etc.The filter building should be designed with care for Architectural and aesthetic considerations having sufficient space for storage operators room,testing room with washroom facilities including septic and soakage disposal systems incl all internal and external lighting and plumbing arrangements and floor matting wherever required.The Building should be so designed with adequate high rib colour coated laminate roof on structural srteel truss.The building should be provided with powder coated Aluminium doors and windows with a collapsible front shutter door.All the electro-mechanical fittings,accesssories,equipments should be from standard approved reputed manufacturers/brand to be approved by the Engineer.The job includes the cost of soil testing,concrete cube testing,painting ,polishing ,Tile work,granite/marble flooring incl plinth protection,levelling and dressing arond the structure and construction of approach path of interlocked tiles of avg. 50m length and 3m width.Scope also includes approval of Design from DIQC.Complete job.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel from nearest source for an avg. lead of 10kms.

Sand & Stone aggregates for an avg. lead of 45 kms.

Stone soling for an avg. lead of 15 km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 300mtrs.

cement

steel

Sand & Stone aggregates

Stone soling

Rampathri-A (Rs. 357.26 Lacs)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.

Providing & laying of stone soling hand packed in trenches.(Nallah)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing/Fabricating,, fixing of M.S fittings viz bends, Tees,nipples double collars, tail pieces of suitable degrees to be fabricated from 6mm/8mm thick M.S plate as per the requirement of site. This item also includes cost of spun yarn with insertion of spun yarn including welding charges,cutting,threading ends etc. The work should be leak proof . The job is to be paid in fitted and finished form and is to be carried out as per the directions of site in charge.complete job.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.

Supplying and stacking at site:Graded crushed stone aggregate of size:

90 mm to 45 mm

63 mm to 45 mm

53 mm to 22.4 mm

Supplying and stacking at site:Stone screening of size:13.2 mm nominal size (Type A)

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Design,Construction,Testing,Successful Commissioning of 1.00 MGD RSFP including flash mixer,Clariflocullator,filter room with filter beds including cost of all electro-mechanical works ,chemical and Bacterioligical treatment including necessary laboratory items,pipe work,cost of pipe specials ,fittings ,extension rods,valves,bends complete job.The cost includes installation of 100 KVA electric sub-station with a suitable size bed, inlet power supply control panels.The Filter Beds should be designed with adequate under drainage and disposal system,complete backwash system, filter media etc.The filter building should be designed with care for Architectural and aesthetic considerations having sufficient space for storage operators room,testing room with washroom facilities including septic and soakage disposal systems incl all internal and external lighting and plumbing arrangements and floor matting wherever required.The Building should be so designed with adequate high rib colour coated laminate roof on structural srteel truss.The building should be provided with powder coated Aluminium doors and windows with a collapsible front shutter door.All the electro-mechanical fittings,accesssories,equipments should be from standard approved reputed manufacturers/brand to be approved by the Engineer.The job includes the cost of soil testing,concrete cube testing,painting ,polishing ,Tile work,granite/marble flooring incl plinth protection,levelling and dressing arond the structure and construction of approach path of interlocked tiles of avg. 50m length and 3m width.Scope also includes approval of Design from DIQC.Complete job.

Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.

cement & steel from nearest source for an avg. lead of 10kms.

Sand & Stone aggregates (upto 40mm) for an avg. lead of 45 kms.

Stone aggregates (upto 40mm) for an avg. lead of 45 kms

Stone soling for an avg. lead of 15 km

Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100mtrs.

cement

steel

Sand & Stone aggregates

Stone Soling

Maindeep Enterprises

ME PROJECT PRIVATE LIMITED