Loading
Loading…
Loading…
Tender Value
₹98.5 L
EMD Value
₹2.0 L
Closing Date
21 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Electrical License: The tenderer/Firm should have valid electrical contractor license on their own name or firm name issued by Electrical licensing board of any state. The license should have been issued on a date prior to the date of tender opening. Copy of License shall be uploaded online failing which offer will be rejected.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month before the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar nature of work: "Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc. (with or without supply of items / equipment) for 230V, 1phase or 415V, 3phase system or higher voltages".
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Improvement/provision of facilities at Hingoli goods shed- Electrical arrangements.
NED-E-40-2025-26~SCR
NED-E-40-2025-26
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹2.0 L
21 Jan 2026
30 Dec 2025
7 Jan 2026
107 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 98,47,324 | ||
| — | 5.00 | — | — | ||
| Shifting of High mast from one location and reinstalling it to shifted point as per the section engineer requirement including the formation of M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2m depth including excavation and fixing provided nut bolts with the help of template,duly plastered as per design complete (for16 m raising lowering high mast) | — | — | — | 6,52,425 | |
| — | 15.00 | — | — | ||
| Providing & erecting 5 m high (clear height) galvanized OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F on provided foundation as per specification No. OH-PL/OPL. | — | — | — | 2,10,555 | |
| — | 15.00 | — | — | ||
| Providing & casting of M - 20 grade reinforced cement concrete (RCC) foundation suitable for 3m to 5m high octagonal /conical G.I. pole considering the safe soil bearing capacity at site as 10 T/sq m at 1.5m depth including supply of steel, concrete,excavation and fixing provided nut bolts with the help of template as per design in an approved manner. | — | — | — | 49,560 | |
| — | 15.00 | — | — | ||
| Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia 'B' class G.I. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no.FG-BKT/BPC. | — | — | — | 18,930 | |
| — | 300.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq mm bFRLSH copper PVC insulated wire laid inside pole or any other places. as per specification | — | — | — | 29,700 | |
| — | 135.00 | — | — | ||
| Supply and fixing of 40 W LED type weather proof street light fitting complete with all accessories and conforming to specification no. SCR/LED (OD) LIGHT FITTINGS/003 (Amdt.3)-2017. | — | — | — | 3,46,680 | |
| — | 500.00 | — | — | ||
| Wiring points: Provision for wiring with two runs of 1.5 sq mm 1100 V and one run of flexible copper conductor 1.5 sq mm 1100 VPVC insulated wires (phase, neutral andearth) in concealed PVC conduit pipe/ casing and capping with 6A flush modular type switch control including 2-way switches wherever required, 3 pin ceiling rose and modular type plate cover to MS switch control box including all labor charges complete for fan points, light points, bell points, exhaust fans point etc. All the material used shall be of ISI approved make. | — | — | — | 2,40,000 | |
| — | 1000.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq mm and earth wire 2.5 sq mm FRLSH PVC copper wire in HMS PVC conduit min. 20/40 mm dia, as per specification. | — | — | — | 1,98,000 | |
| — | 400.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending,drilling, welding, riveting etc. treated with anti-rust treatment and duly power coated as per the above specification. | — | — | — | 1,05,200 | |
| — | 80.00 | — | — | ||
| Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% copper purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete. | — | — | — | 95,440 | |
| — | 2.00 | — | — | ||
| Supply & fixing of 250 A on-load change over switch suitable to operate on 415 V,50 Hz conforms to IS:13947-3 with sheet steel enclosure front handle operated. | — | — | — | 49,110 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Micro processor Release 100-250 A range; 4 Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. | — | — | — | 76,900 | |
| — | 100.00 | — | — | ||
| Provision of supply, fixing,connecting, and testing of fabricated junction box (L-56cm, W-23 cm, D-15 cm) made with 18 SWG sheet steel enclosure with door and locking arrangements and comprising of 8x16 A SP MCB,4x32 A SP MCB with neutral and earth links and 8 Nos. busbar supporting insulators and fixing with suitable mounting with MS clamps as per site condition. | — | — | — | 3,03,200 | |
| — | 30.00 | — | — | ||
| Supply, fixing, testing and commissioning of Thermal magnetic Release 100 A range; 4 Pole, MCCB suitable for operation on 415 V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. | — | — | — | 1,71,180 | |
| — | 2.00 | — | — | ||
| Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface /flush mounted with 4 ways for incoming and 12 ways for outgoing SP/TPMCB's on iron frame /laminated board as per specification No.SW-SWR /MCBDB. | — | — | — | 5,130 | |
| — | 20.00 | — | — | ||
| Supply, erection and marking TPN MCB 63A,10 kA C-series in provided distribution board as per specification No. SW-SWR/MCB | — | — | — | 28,500 | |
| — | 30.00 | — | — | ||
| Supply, erection and marking DP MCB 16-32A,10 kA B-series in provided distribution board as per specification No. SW-SWR/MCB | — | — | — | 15,690 | |
| — | 50.00 | — | — | ||
| Supply and fixing of 3 way modular boards with 6A socket (1 No.) & 6A switch (1 No.) | — | — | — | 14,200 | |
| — | 50.00 | — | — | ||
| Supply and fixing of 6 way modular boards 6A socket (2 Nos.) & 6A switch (2 Nos.) | — | — | — | 59,950 | |
| — | 35.00 | — | — | ||
| Supply and fixing of 8 way modular boards 6A socket (3 Nos.) & 6A switch (2 Nos.) | — | — | — | 55,965 | |
| — | 35.00 | — | — | ||
| Supply and fixing of 12 way modular boards 6A socket (2 Nos.) & 6A (8 Nos.) switch | — | — | — | 79,380 | |
| — | 28.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiseling and finishing with cement mortar/POP as per required to match the back ground in an approved manner | — | — | — | 6,692 | |
| — | 30.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiseling and finishing with cement mortar /POP as per required to match the back ground in an approved manner. | — | — | — | 9,390 | |
| — | 28.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiseling and finishing with cement mortar / POP as per required to match the back ground in an approved manner. | — | — | — | 13,860 | |
| — | 60.00 | — | — | ||
| Supply and erection of modular type 5 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. | — | — | — | 7,920 | |
| — | 30.00 | — | — | ||
| Supply,erection, testing and commissioning of Thermoplastic Polycarbonate Cable junction box (Dimensions of 300 mm x 450 mm x 170 mm (LxBxH)) with IP 65 protection with metric knock-outs for cable entry, Double compression glands and with 4 terminals, suitable for cable size 50/70 sq mm including provision for locking arrangements, internal copper cabling and with all connected accessories as per specification, scope of the work & site condition. | — | — | — | 4,47,480 | |
| — | 8.00 | — | — | ||
| "Supply, erection, connecting, testing and commissioning of Thermo plastic Poly carbonate Cable junction box (Dimensions of 300 mm x450 mmx 170 mm (LxBxH)) with IP 65 protection with metric knock-outs for cable entry, Double compression glands and with 4 terminals, suitable for cable size 120/150 sq mm including provision for locking arrangements,internal copper cabling and with all connected accessories as per specification,scope of the work & site condition. " | — | — | — | 1,78,560 | |
| — | 200.00 | — | — | ||
| Supply of SMC pole junction box of size 273 x136 x113 mm (Approx.) suitable to fix with clamps for round steel tubular street light poles with all necessary connectors. | — | — | — | 1,55,600 | |
| — | 200.00 | — | — | ||
| Supply and erection modular type switch 6/10 A ISI mark approved make duly erected on provided plate and box with wiring connections complete. | — | — | — | 10,200 | |
| — | 40.00 | — | — | ||
| Supply and erection modular type socket 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. | — | — | — | 4,120 | |
| — | 200.00 | — | — | ||
| Supply and laying of 4 core 120 sq mm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part- 1)/1988 with amdt. no. 1, 2& 3 (reaffirmed 2005) or latest. | — | — | — | 1,34,800 | |
| — | 1500.00 | — | — | ||
| Supply and laying of ISI marked 4 core 50 sqmm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire orsteel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988with amdt. no. 1,2 & 3 (reaffirmed 2005) orlatest. | — | — | — | 4,75,500 | |
| — | 500.00 | — | — | ||
| Supply and laying of ISI marked 4 core 25 sq mm cross linked polyethylene (XLPE) insulated LT UG cable, PVC outer sheathed, armored with galvanized round steel wire or steel strip and with Aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098 (Part-1)/1988 with amdt. no. 1,2 & 3 (reaffirmed 2005) or latest. | — | — | — | 1,00,500 | |
| — | 2200.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 26,400 | |
| — | 300.00 | — | — | ||
| Making trench in soft soil of suitable width and depth as per IS for laying provided LT cable including sand cushioning, bricks andlaying of cable warning tape complete as per specification. | — | — | — | 50,100 | |
| — | 100.00 | — | — | ||
| Making the trench in Hard murum/Tar Road of suitable width and depth as per IS for laying provided L.T cable and covered with min 150 mm dia half round hume pipe including sand cushioning, bricks and laying of cable warning tape complete as per specification | — | — | — | 30,300 | |
| — | 40.00 | — | — | ||
| Supply of 50 mm dia 'B' class ERW GI pipe conforming to IS: 1239 Part 1 (2004) and fixing with suitable clamps on wall/ building including laying of cable through GI pipe. | — | — | — | 20,440 | |
| — | 20.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification | — | — | — | 80,820 | |
| — | 10.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/ MCBDB | — | — | — | 17,270 | |
| — | 400.00 | — | — | ||
| "Supply and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE pipe 110 mm (nearest 4"" dia) and wall thickness minimum 4.1 mm maximum 4.3 mm with ""T' joints, bends, elbows etc. including all other connected accessories. | — | — | — | 1,46,800 | |
| — | 600.00 | — | — | ||
| Design, Fabrication, Supply, installing and fixing 225 mm width, 50 mm depth, 2mm thickness sizes perfect G.I tray (cable Tray ) including horizontal stiffener to avoid sag of tray and vertical bends reducers, tees, cross members and other accessories including fixing with suitable G.I Clamps/G.Iangles/G.I flats and with necessary connected hardware etc. | — | — | — | 3,79,800 | |
| — | 2.00 | — | — | ||
| Supply installation testing and commissioning of 3 phase 5 HP Mono Submersible (open well) pump. | — | — | — | 52,868 | |
| — | 2.00 | — | — | ||
| Supply installation testing and commissioning of 3 phase, 5 HP DOL pump starter. | — | — | — | 17,544 | |
| — | 500.00 | — | — | ||
| Supply and erection of 3 core 4 Sq.mm copper flat cable | — | — | — | 52,500 | |
| — | 1.00 | — | — | ||
| Supply of Energy monitoring device for keeping track of harnessed solar energy through online means | — | — | — | 67,083 | |
| — | 320.00 | — | — | ||
| Supply and erection of LED High Bay light 100 W conforming to specification no. SCR/LED (ID) LIGHT FITTINGS/005 (Amdt.3)- 2023 with IP 65 protection including all necessary items for fixing in shed. | — | — | — | 25,53,600 | |
| — | 20.00 | — | — | ||
| Supply, fixing and installation of 32 A industrial 2P+E plug and socket with 32 A DP MCB. | — | — | — | 52,400 | |
| — | 6.00 | — | — | ||
| Supply of Digital AC/DC Clamp Meter with AC Voltage Range 0-1000V & DC Current Range 0-600A conforming to specification enclosed. Safety Rating: IEC 61010-2-033:CAT III 1000 V /CAT IV 600 V | — | — | — | 2,27,904 | |
| — | 2.00 | — | — | ||
| Hydraulic crimping tool 08 ton capacity along with dies 02 numbers and set consisting of sizes : 6, 10, 16, 25, 35, 50, 70 Sq. mm, model: VX CHT-8 of M/s. MAXWELL or its equivalent as per following specifications: 1) Max. Working pressure 08 Ton. 2) Max. Stroke : 12mm. 3) Max., Cable to crimp range 06 sq. mm to 70 sq. mm. 4) Pressure release valve and inter changeable hexagonal die set of sizes: 6, 10, 16, 25, 35, 50, 70 Sq. mm. | — | — | — | 34,362 | |
| — | 4.00 | — | — | ||
| Supply of Industrial Self Supporting Ladder of anodized Aluminium, Height 6 foot, 15 inch bottom width 150 kg minimum loading capacity, Number of Steps 1-20, Step Type one Side Flat and one side round, Anti Corossion,Slip Resistant, Foldable, Anti loosen rivets fitted with Bottom Rubber, SideLock, Side Plug and Safety code as per IS 3696-2 (Latest) with 2 year warranty | — | — | — | 42,440 | |
| — | 50.00 | — | — | ||
| Design, Fabrication and supply of 16 watts LED lights fitting, (10W+4 W+2 W) Aluminum die cast with IP 67 Protection necessary hardware material suitable to workon 24 V DC/48 V AC. 3 Dimensional type for pit lighting as per latest Specification) Note Prier Approval to be taken including all accessories. | — | — | — | 2,23,000 | |
| — | 1.00 | — | — | ||
| Supply and fixing of DG set of 100 AMF Control Panel Brand (100 KVA rating) | — | — | — | 13,51,376 | |
| — | 1.00 | — | — | ||
| Supply and fixing of DG set of 2.5 AMF Control Panel Brand (2.5 KVA rating) | — | — | — | 70,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .