REPAIRS TO APPROACH PATH, FENCING, SECURITY WALL AND ALLIED WORKS INCLUDING DESILTING OF RWH AT QG, RA LINES, MLIRC, HARDING LINE AND LAXMI TEK AREAS UNDER GE BELGAUM

Amount

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in hard/ dense soil all as specified and directed.

Returning filling in with approved excavated soil including spreading levelling, watering and well ramming in layers n. exc. 25 cm thick all as specified and directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point in soil all as specified and directed.

M&L for hard core with broken stone or boulders of gauge n.exc 63mm, deposited, spread, levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces all as specified and directed.

M&L for loose filling with broken brick agregates of gauge 80 to 150mm in pits all as specified and as directed.

De-silting of existing storm water drains of any size and taking out all debris, garbage or any solid/ foreign materials from inside the drain including removal of shrubs, bushes, vegetations, etc. along both sides of the drain complete including removing the debris to a distance not exceeding 50m complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in channels, benching inside manhole, etc. including necessary form wok and moulds including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped end etc. all as specified and directed.

M&L for plain cement concrete 1:3:6 type C1, using 20mm graded stone aggregate in drains, copings, bed blocks including necessary form wok including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C0, using 12.5mm graded stone aggregate, set in CM 1:6 including demolition of existing unserviceable masonry of any description and making good the distured surfaces all as specified and directed.

M&L for providing precast cement concrete 1:2:4, Type B1, using 20mm graded stone aggregate, as in kerbs, with rounded or chamferred edges including all mouldings, set in cement mortar 1:6 including demolition of existing kerbs of any description and size all as specified and as directed.

M&L for providing precast cement concrete louvres and jallies, 1:2:4, Type B0, using 12.5mm graded stone aggregate, 35mm thick (measured solid) including all mouldings but excluding frame, set in cement mortar 1:4 ncluding dismantling existing unserviceable RCC jallies of any description and size all as specified and as directed.

M&L for providing precast cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate as in cover slabs for manholes, water troughs and similar articles with plane faces etc. set in CM 1:6 including demolition of existing dilapidated manhole covers all as specified and directed.

M&L for Reinforced Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for Reinforced Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate in columns, pillars, piers, posts and struts including demolition of existing unserviceable concrete of any description and making good the distured surfaces all as specified and directed.

M&L for use of form work to sides of concrete foundations, column footings, plinth beams and similar works for rough finished flat concrete surfaces, vertical or to batter, all as specified and directed

M&L for use of form work to sides of pillars, posts, struts, columns, etc. for fair finished concrete surfaces, square, rectangular or polygonal all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.

All as described in item No. 19 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for mild steel round bars 10mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia, fixed in repairs, all as specified and directed.

M&L for rolled mild steel posts and struts in fencing and similar work conforming to Fe-290 Gde E-165 including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets for securing wire mesh etc. including dismantling of existing unserviceable posts or struts any section, including taking out embedded portion and making good disturbed ground all as specified and as directed.

M&L for mild steel framed work as in gates of angle or other section with gusset plate, rails, braces etc complete, prepared for hanging or sliding with and including either hook or hinges and hanging fastening and fixing complete conforming to Fe 410W (Gde E-250) including dismantling of existing unserviceable mild steel sections of any section, including making good disturbed surfaces all as specified and directed.

Supply only chain link fencing, any mesh, size and type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type, fixed to any type of standards, rails, straining bolts, etc. including provision of binding wire including takng down existing unserviceable fencing mesh of any description and size all as specified and directed.

M&L for 50 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for floor including demolition of existing unserviceable PCC sub base of any description/ thickness and making good the disturbed surfaces all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for floor including demolition of existing unserviceable PCC flooring of any description/ thickness and making good the disturbed surfaces all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in paving, hard standing etc. and finishing the concrete surface even and fair without using extra cement and making impressions of expanded metal while the concrete is green including demolition of existing unserviceable concrete of any description all as specified and directed.

M&L for rubber coated chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments and glossy finish on top, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. including dismantling of existing unserviceable stone slab/tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for 55-60mm thick machine pressed precast concrete interlocking coloured paver blocks, M-35 grade, any shape and size with glossy finish on top, confirming to IS 15658-2006 including dismantling of existing unserviceable paver blocks and removing rubbish off the premises all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking coloured paver blocks, M-40 grade, any shape and size with glossy finish on top, confirming to IS 15658-2006 including dismantling of existing unserviceable paver blocks and removing rubbish off the premises all as specified and directed.

M&L for crushed stone sand (M-sand/ Robo sand/ i-sand) conforming to IS 383-1970, filled in floors or pavings including watering and consolidation all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C1, (Using 20 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc. including demolition of existing plain cement concrete plinth protection of any description and thickness and making good disturbed surfaces all as specified and directedall as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth without using extra cement including taking down existing cement plaster and hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for two coats of cement based paint, any colour, on newly plastered surfaces of walls, pilasters, cornices, etc., over a coat of alkali resistant primer including necessary preparation of surfaces all as specified and directed.

M&L for one coat of cement based paint, any colour, on old cement painted surfaces of walls, pilasters, cornices, etc., including necessary preparation of surfaces all as specified and directed.

M&L for two coats of weather proof exterior acrylic emulsion paint over a coat of alkali resistant primer on surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for PVC pipe, 110mm dia, SDR-41, stiffness clause 4 KN/ Sqm, conforming to IS 15328-2003, single socketed in any length, jointed with solvent cement laid in trenches including demolition and breaking up of existing unserviceable SGSW/ RCC drain pipes jointed in cement mortar including demolition of bed concrete and taking out of demolished materials from trenches and making good disturbed surfaces all as specified and directed. Make: PRINCE/ SUPREME/ FINOLEX

M&L for bed concrete to 110mm bore drain pipes in Plain Cement Concrete 1:4:8 type D2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested all as specified and directed.

M/s B C CHOUGULE

M/s. KIRAN M CHOUGULE

SHRI.H.R.PATIL

Vinod Enterprises

M/s. N D KALING

DHANSHRI ENTERPRISES