REPAIRS TO COMPOUND WALL, FENCING, DRAIN, PERIODICAL SERVICES TO CERTAIN BLDGS AND CERTAIN B/R REPAIR WORKS UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR

Amount

M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper, complete all as specified and as directed.

All as per item No 1.00 above but two coats of oil emulsion distemper complete all as specified and as directed

All as per item No 1.00 above above but on ceiling complete all as specified and as directed

M&L for applying a layer of wall care putty on wall and making surface even and smooth complete all as specified and as directed.

M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth, complete all as specified and as directed.

M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coats of syanthetic enamel paint complete all as specified and as directed

M&L for preparation of old wall surfaces and applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion paint complete all as specified and as directed Note : Rate shalll be included for scaffolding at any height

M&L for preparation of old wall surfaces and applying two coats of acrylic emulsion weather coat premium quality antifungal exterior emulsion paint complete all as specified and as directed Note : Rate shalll be included for scaffolding at any height

M & L for cleaning the exting floor / concrete surfaces/ path by washing rubbing or by applying high pressure wall jet of 120 PSI to remove algae / mud and applying one coat of weather resistant floor paint complete all as specified and as directed

M&L for demolition of RCC work of any description and any position complete all as specified and as directed

M&L for RCC (Design mix) M-30 graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns & retaining wall etc as in basement slabs, under reamed piles and mass concrete complete all as specified and as directed

M&L for RCC (Design mix) M-30 graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed

M&L for RCC (Design mix) M-30 graded aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M&L TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed .

M&L TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed

M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, side and soffits (if any) of foundation and plinth beams and simillar work, vertical or to batter rough finished surfaces of concrete flat complete all as specified and as directed

M&L for formwork to sides of pillars, posts, struts,piers,columns and stanchions rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and as directed

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and as directed

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:4) on brick/block wall or concrete surfaces, finished even & fair complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces, finished even & smooth complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of cement based paint over a coat of chalk whitning complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion over a coat of primer complete all as specified and directed

M&L for preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finsihed the surfaces even and smooth without using extra cement complete all as specified and as directed

M & L for preparing newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth including taking down cement plaster complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.

M&L for non skid cermic coloured tiles 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and as directed

M&L for vitrified double charged coloured ceramic tiles 10 mm thick ( Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and as directed

All as per item No 35.00 above but as in vertical surfaces/skirting over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

S&F glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) .

Taking up or down 15/20mm bore steel tubing and connections complete all as specified and as directed

Taking up or down 25/32mm bore steel tubing and connections complete all as specified and as directed

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 20mm with proper clamping arrangements complete all as specified.

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 25mm with proper clamping arrangements complete all as specified.

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 32mm complete with proper clamping arrangements all as specified.

S&F CPVC brass threded elbow 20mm outer dia complete all as specified and as directed

S&F CPVC brass threded Tee 20mm outer dia complete all as specified and as directed

S&F CPVC Brass threaded adopter (FTA/MBTA) of 20mm outer dia complete all as specified and as directed

S&F CPVC Brass threaded adopter (FTA/MBTA) of 25mm outer dia complete all as specified and as directed

S&F Tank adoptor for 32mm outer dia CPVC Pipe complete all as specified and as directed

S&F CPVC Union for 32mm outer dia pipe complete all as specified and as directed

S&F Ball valves for 25 OD CPVC pipes complete all as specified and as directed

S&F Ball valves for 32 OD CPVC pipes complete all as specified and as directed

M&L for cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complet all as specified and as directed

S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.

S&F in repair 15mm bore fancy type CP Centre hole Wash Basin Mixure high quality without popup waste with 450mm braided hoses all as specified

S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and as directed

S & F in repairs to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F in repairs to Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed

S & F in repair Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type heavy duty, 15 mm dia, with capstan head, screwed down high pressure screwed for iron pipe and fixed complete all as specified and as directed

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock fancy type with long shank and cup and fixed, complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated conceled type stop cock fancy type with long shank and cup and fixed, complete all as specified and as directed.

S & F in repair CP Health faucet with 8mm dia, 1.2 Meter long flexible tube & wall hook complete all as specified and as directed

S&F in repairs brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

S&F in repairs CP Toilet paper holder fancy type high quality complete all as specified and as directed

S&F in repairs sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 50cm long, complete all as specified and as directed.

S&F in repairs Corner glass shelf high quality of 5mm thick glass & CP railing with bracket complete all as specified and as directed

S&F in repair high quality CP Towel Ring square with round flange fancy type complete all as specified and as directed.

S&F in repair CP Towel Rail high quality 600mm long with wall flange complete all as specified and as directed

S&F in repair Waste pipe of 32/40mm dia complete all as specified and as directed

Supply only brass spandles for Bib Cocks/Stop Cocks/Wall/Basin Mixers etc complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

S&F in repairs vitreous chinaware wash down water closet pan (Pedestal pattern) single piece WC with PP seat cover, hinges fixing accessories set, cistern fittings at overall size 640x360x390 etc complete all as specified and directed.

S&F in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets complete all as specified and as directed

S&F in repairs 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed.

S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed.

Taking down chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sqmeach and removing to store complete all as specified and as directed.

Taking down chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed.

Taking down Shutters of any description n. exceeding 1.00 Sq.m each complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Resecuring (or) Easing and adjusting without taking down shutters of any description and any size complete all as specified and as directed.

S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S & F 30 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S & F second class hard wood 30 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed.

S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed

S & F Floor Door Stopper of size 140 mm of aluminium alloy body and tongue, anodised all as specified and as directed.

S&F repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete

S&F Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified. NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth & Decogrill etc. (ii) Glass, wire cloth & grill to be measured and paid separately as supply only

Supply only 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and as directed

Supply only anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed.

S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc all as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specicified and as directed

S&F in repairs PVC (SWR) floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed ,(cement concrete shall be measured and paid seperately.

S&F in reapir for 500 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including tank cover complete all as specified and as directed

S&F in repairs 1000 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed

Dismantling boarding any description and in any position fixed with naill complete all as specified and as directed

M&L 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured and paid separately)

S&F GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed

S&F 605 X 605mm grid hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of celing cleats made out of GI flat 40 x 3mm size 60mm long complete all as specified and as directed

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with tinned tacks or galvanised wire staples for plaster of paris ceiling work complete all as specified and as directed

M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper complete all as specified and as directed

M&L for RCC (nominal mix) 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab complete incl necessary form work complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level) complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor complete all as specified and as directed

M&L for 60mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-40 Grade as approved laid in sand cushioning complete all as specified and as directed Note : Sand cushioning shall be measured and paid separatly

M&L for 80mm thick Machine pressed precast conctrete interlocking paver block reflective type any shape and size confirming to IS 15658-2006, M-40 Grade as approved laid in sand cushioning complete all as specified and as directed Note : Sand cushioning shall be measured and paid separatly

M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and as directed

M & L for coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 20 mm thick screed bed or bedding layer in cm 1:6 etc. complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of flooring /Hard standing / roofpadding and similar work etc complete all as specified and directed

Dismantling wrought iron or mild steel work of nay description not otherwise provided for all as specified and directed by Engineer in Charge

Demolition of Precast Concrete work/ precast concrete block built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry using PCC, Type C-1 (1:3:6 )(20mm graded stone aggregate) solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) for correction of roof slab / roof padding etc all as specified and directed

M&L for providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqm by forced application including one coat of aluminium paint over the top surface complete all as specified.

M&L for dual coat of aluminium paint over the top surface of APP on Roof complete all as specified.

M&L for applying a coat of blown type bitumen at the rate of 1.50 kg per sqm and binding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E-165 (Brackets over 10 kg each to be measured under ‘Structural Steel')

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) complete all as specified and as directed

S&F rolled Mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc..(Fe-410-W(Gde E-250)Quality-A) complete all as specified and as directed

M&L for preparation of new steel surfaces and applying two coats of red oxide primer of any description over 10cm in width or grith not other wise described complete all as specified and directed.

M&L for preparationi of new steel surfaces and applying one coat of synthetic enamel paint of any description over 10cm in width or grith not other wise described complete all as specified and directed.

M&L for preparation of old concrete surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description over 10cm in width or grith not other wise described complete all as specified and direcetd

S&F in reapirs Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as iin roof covering/cladding to wall, fixed with self tapping screws including dismantling all as specified

All as per item No 134.00 but plain steel sheet as in ridges & gutters complete all as specified and as directed

M&L for providing PCC 1:2:4 type B1 using 20mm graded aggr as in bed plates/ coping/kerbs/water trough roof curbs / mudstops / flooring/Hard standing and similar works suface finished even and fair all as specified and directed

M&L for PCC 1:2:4 type B2 using 40 mm graded aggregate in surface channels and drains complete all as specified and as directed

S&F in repair 3.5mm dia GI chain link fencing with PVC coated 50mm x 50mm mesh including fixing of MS flat iron,Rod & bolts including fixing of fencing posts all as specified. Note: Supply only of MS flat iron, Rod & MS bolts shall be measured & paid under relevent item of Schedule)

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Concrete, brick work, masonry, etc complete all as specified and as directed

Supply only MS work as posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ®

Ssupply only Mild steel rag or lewis bolts, dia of necks is 12mm screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n.exc 15cm long complete all as specified and as specified

S&F in repair for stainless steel of grade SS-316, mirror polished square/rectangular/circular pipe of deifferent sizes for structural shed, balusters, railing and similar works including stainless steel arc welding and bright finishing by polishing with grinding etc, complete al as specified and directed

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed Note : Each each line of wire to be measured

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for PCC 1:3:6 type C2 using 40 mm graded aggregate in foundation filling and mass concrete complete all as specified and as directed

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed.

M&L for 20mm thick Granite machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type

M & L for Granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

V CHINNA DURAI

bansal construction

Allied Trading Company

M/s Pintu Furniture

RS ENGINEERING WORK