REPAIR TO CERTAIN CONCRTE PATH, BERMS AND DISPERSAL DRAIN AT AF STN SONEGAON, NAGPUR

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete/brick masonry etc and making good disturbed ground complete all as specified and directed.

Dismantling Chain link fencing wire mesh or barbed wire any type complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M&L for providing PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 all as specified and as directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillet for securing wire mesh etc., including all necessary drilling, bolting or riveting etc., and similar work.etc and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.

S&F in repairs 11mm to 15mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Fixing only chain link fencing including line wires of any dia, any mesh size and type to any types of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. Note : Chain link fencing, nut bolts, and line wires shall be measured separately .

Supply only mild steel galvanised chain link fencing 4mm dia of any size or type complete all as specified and directed.

M&L for plain mild steel round bars of 10mm dia and over cut to length, bent to shape required for straining line wires including binding wire in fencing using Fe-410-W (Gde.E-250) quality-A or Fe290 (Gde-E-165) quality steel complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and smooth externally all as specified and as directed. Note: WPC will be measured and paid separately.

M&L preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of cement wash on walls complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls/ chajja including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and trading oil & greasy spots and applying one coat of oil bound distemper complete all as specified and as directed.

Demolition of PCC in ground floor and paving n. exc. 15cm thick below or above ground level including removal of debris outside MD land complete all as specified and directed.

M&L for providing 100mm thick PCC 1:2:4, type B1 using 20mm graded aggregate as in sub base of floor / hard standing all as specified and directed.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in surface channel and drain including necessary formwork complete all as specified and directed.

M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 150mm thick concrete slab complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and paving n. exc. 15cm thick below or above ground level including separating, scraping and cleaning of reinforcement and removal of debris outside the MD land complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in precast cover slab with plain faces for manholes set in cement mortar (1:4) including necessary form work complete all as specified and directed.

M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

All as per Item No 26 above but Add or deduct for each 25 mm girth or part thereof over or under 30cm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L mild steel TMT bars in reinforcement 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M & L for writing letters or figures or squares (Block, Roman, Italic or Indian) of height not exceeding 30 cm with thick paint on existing painted surfaces including preparation of old surfaces complete all as specified and as directed.

karambir constructions (BID ID -3076280)