REPAIR/CLEANING OF SEWAGE LINE, SEPTIC TANK, MANHOLE AND OTHER MISC WORK IN MD/OTM ACCN IN VARIOUS ZONE AT TALBEHAT MIL STN

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil etc. including trimming bottom and sides of trenches, leveling/ grading and ramming bottom of excavation complete all as specified and directed.

Demolition and breaking up 150 mm dia (Salt glazed ware ,AC / CI or reinforced concrete) set in cement mortor drain pipe, jointed set in cement mortor.incl pcc if any and taking out of trenches,floor, if required complete all as specified and directed.

S&F 100mm dia Sand Cast iron soil waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm dia Sand Cast iron soil waste and vent pipes, in any length with or without ears, with cement joints and fixed to wall complete all as specified and directed.

S&F 100mm dia Branch piece, single (equal or unequal) , ordinary or inverted, spigot or socket type or with parallel branches complete all as specified and directed.

S&F 75mm dia Sand Cast iron soil waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm dia Cast iron bend diminshing pieces or tapers complete all as specified and directed.

S&F 75mm dia Cast iron bend diminshing pieces or tapers complete all as specified and directed.

S&F 100mm dia Cast iron bend with oval access door diminshing pieces or tapers complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in laid with PCC 1:4:8 type D-2 to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil to a distance exc 250m but n/exc 500m and depositing where directed

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

Demolition of brick work or stone / boulder masonary,built in cement mortar incl all quoins , pillars etc complete all as specified and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc incl racking out joints , hacking for key , scrubbibg down with water etc.complete all as specified and directed. Note: All debris obtained from taking shall be removed 1.5km to 2km complete all as specified and as directed.

Rendering 15mm on fair faces of brick work finished even and smooth without using extra cement in CM (1:4) mixed with liquid water proofing compound as per manufacturer instructions complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid seperately.

Supply only liquid water proofing compound.

M&L for Neeru finish to plastering complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

Providing precast cement concrete type B1 1:2:4 20 mm graded aggregate as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.

M&L TMT bars 10 mm dia and over cut to length bend to shape required incl. cranking hooking ends and binding with and incl. MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

S&F MS round bar of 10mm dia and over as in rungs/ handle for manhole cover complete all as specified and as directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 50mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for PCC inter locking tiles,coloured,reflective type/rubber moulded, conforming to IS-15658-2006 of 60mm thick , M-35 grade of approved quality,laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for Heavy duty ceramic tiles size 300x300x 8-10 mm thick any colour set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm thick crushed stone aggregate) as in sub base or similar work complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as finishing concrete surface, channel benching of manhole, laid to shape and slope surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and as directed

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, including slightly rounded or chamfered angles and including necessary form work finishing exposed surface.

S&F in repairs PVC flexible waste pipe of approved quality 32mm bore, 65cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

S&F in repairs PVC waste pipe for urinal complete all as specified and as directed.

S&F in repairs 125mm dia PTMT grating doom shape with centre or side hole (Mini Wt 40 grms) complete all as specified and directed.

S&F in repairs CP gratting 110mm dia complete all as specified and as directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and directed

S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed..

S&F for 110 mm bore PVC (SWR) shoe of any angle complete all as specified and as directed.

Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm/75mm complete all as specified.

Repair to gate area 3.00 Sqm to 10.00 Sqm including necessary welding, riveting, easing drilling and replacement of unserviceable device, and making them in serviceable condition complete all as specified and directed. Note- Material shall be measured and paid separately.

S&F Framed/ Unframed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc. complete, all small articles including drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

S&F for ACP background sheet for thickness (3mm to 4mm ) and fixed in angle and other section frame in any position specifications complete all as specified and directed by Engineer-in-Charge. Note:- (i) The design of each board,size,shape,colour,thickness shall be approved by Engineer-in-Charge. (ii) Using of T&P etc. to be included in this item. (iii) Frame work and paint work shall be measured and paid separately.

S&F for for stainless steel letter mirror finish for outdoor (height min 10") . The letter are fixed in ACP sheet sign board with using of adhesive paste properly in any position complete all as specified and directed by Engineer-in-Charge. Note:- (i) The design of letter, colour, thickness and size shall be approved by Engineer-in-Charge. (ii) Using of T&P etc. to be included in this item.

M&L for preparation of old painted steel surface of any description and applying one coat of synthetic enamelled paint complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for 20mm thick granite on horizontal & vertical surface over & including 15mm thick screed bed in CM 1:4 laid over slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

M&L for Engraving on granite surface letter height up to 10cm. All engraved part on granite surface colour shall be approved by Engr-in-Charge.

M&L for Engraving on granite surface letter height exc 10cm, n.exc 15cm. All engraved part on granite surface colour shall be approved by Engr-in-Charge.

M&L for Engraving on granite surface boarder width n.exc 50mm.All engraved part on granite surface colour shall be approved by Engr-in-Charge.

M&L for Engraving on granite surface Logo in circular type n.exc 0.40Sqm.All engraved part on granite surface colour shall be approved by Engr-in-Charge.

Cleaning and removing of blockage of any type of sludge /effluent etc. in sewage line any dia including affected manholes and disposal of waste materials / spoils upto a distance of 50 mtrs by any means manually with the help of green bamboo or any other mechanical method including washing out manhole and sewage line and disposal of waste / sludge in pits complete all as specified and directed. Note:- Each time cleaning of blockage shall be paid and measured separately.

Cutting into existing manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

M & L for attending of sewage complaints for blockage of WHB, WC, Urinals, Sinks, bottle trap, floor trap, Nahani traps, WC gully trap, vertical CI pipe/PVC pipes of any dia including junction holes of any description in the AOR of AGE(I) Talbehat. with and including petty repairs items/materials i.e. screws, washers, plugs, grease etc., cutting of grass, vegetation, shrubs etc., digging out roots completely by crow bars, chisel etc., cleaning of sewer/rain water pipelines with manholes laid in any situation for cleaning and removing blockage from entire system and making it fully functional and removal of sludge / mud , complete all as directed. Note : Any major item/material which are required to be replaced shall be paid under respective item of this schedule. The cost of minor items like nails / screws / hexa blades / washers / plugs / grease etc. shall be deemed to be inclusive in the quoted rates only. NOTE - All the complaint(s) will be addressed and rectified within 60 minutes from the time of receipt of complaint. If, contractor or his tradesmen fails to attend and rectify the complained within 02 hrs from the time of receipt of complaint, the compensation/penalty of Rs. 50.00 (Rupees Fifty only) per complaint per hr for first 02 hrs and after that Rs. 100.00 (Rupees One Hundred only) per complaint per hr shall be recovered from the contractor’s dues. Note:- Each time cleaning of blockage shall be paid and measured separately.

HARNAM SINGH ANIL SINGH

M/S SACHENDRA KUMAR JAIN