Renovation and Reconstruction of Swamy sannathy Amman sannathy Uba sannathies Madapalli Compound wall Entrance Kalkaram etc for Arulmigu Thirubuvaneswarar Thirukovil at Peramandur Tindivanam Tk Villupuram Dt

Providing Scaffolding for vimanam raja gopuram with non flammebable materials wherever necessary for main form work and by providing coconut keeth as covering the areas & plat form for inspection etc all complete.

Vimanam Height upto 15'-0"

Vimanam / Gopuram upto 25’ - 0’ height

Labour Charges for Old Stone Removing

Pavukkal, Wall Stone

Pothiyal, Uthiram, Thun

Flooring

Brick / Stone Masonry in lime mortar walls under 3m high

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with smali sized boulders and hard gravelly soil as per SS 20B for Foundation.

Filling the Foundation and Basement with M.Sand in 15cm thick layers, well rammed & consolidated, including watering, complying with standard specification etc complete.

Refilling with Excavated Earth and well rammed & consolidated, including watering, complying with std.specification etc complete.

Plain cement concrete 1:5:10 (One cement, five sand and ten hard broken granite stone jelly) using 40mm HBG metel as foundation concrete including dewatering wherever necessary and laid in layers of not more than 15cm. thick complying with std specification.

Labour Charges for Old Stone Fixing

Upto kabothagam

Supply of cutstone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other temple Structure upto 10 feet length

Pavukkal, Uthiram & Pothiyal

Wall Stone,

Labour Charges for New Stone dressing and Fixing charges,

Chitharavanam

Upapeeda Pathmam

Upapeeda Kandam

Upapeeda Kabothagam

Jagathi

Kumuthagam

Pattigai

For Aswapatham

For Veerakandapothiyal

Uthiram

Kabothagam

Viyazham

Ulvari

Pavukkal

Vasakal

Uthiram

Column

Nasithalai

Ornamental Brick work in Lime Mortor 1:1.5 mix using country bricks 83/4"x43/8"x23/4"-all-vari vargams, moulds,sthambas,mukapatram, koodu, nasi,and all ornamental brick work complete panchavarnam agaraies, karnakoodus ete forming core walls rajagopuram/vimanams complete including labour chagersetc complete complying the std specifications.

Kalkaram upto 15' Height

Vimanam upto 15' Height

Vimanam upto 25' Height

Brick Work in Lime Mortar 1:2 mix using country bricks 83/4"x41/4"x23/4" size inculding curing, scaffolding etc. complete complying with std. specification

Sub Structure

Super Structure

Providing New Sudhai Vigrahams in the vimanams and rajagopurams with copper iron rod Reinforecement of suitable dia with binding wires wherever necessary, shapping the core with broken bricks set in Combmation mortor1:4:3 finishing mishin the same with ohmation mortor 13 bringing to the correct shape (lakshana) in conformist with silpa sastra inclusive of specials ornaments, weapons, peedam etc., complete and providing C.M nayam theervai wherever necessary inclusive of cost and conveyance of all materials, such as cement broken bricks, and copper rods binding wire all labour for working in heights curing lifting of materials etc.,complete including cement painting 2 coats over a primary coat

Size of 1-6" to 2'-6"

Size of 2'-6" to 3'-6"

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc

Finising the top of the roof with one course of pressed tiles of size 20X20X2cm over a bed of Gombination mortor 1:1313 12mm thick mixed with water proof compound at 2% b weight of cement including cost and conveyance of all materials to site and all labour charges etc

Providing and avin Nachihe M20 Grade in accordance with IS 456:2000 using 20mm and heighing down graded hard broken granite stone jelly for all rec works with minimumm cement content 325Kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommanded proportions as per IS 9103 to acclerate, retard setting of concrete, improve workability with out i paring strength and durability with about (5 cum) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 Cum) 5156 Kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 Kg of sand, but excluding cost of reinforcement grill and fabrication charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in RCC floor/roof slabs wherver necessary without claming extra complete complying std specification and also directed by departmental officers. The coarse and fine aggregates to be used should comply with requirements ofIS standard

For Sub Structure

For Super Structure

Ceiling Plastering with Cement Mortor 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 including all materials and labour charges (Outer)

Providing vargapoochu over the core walls of 1:1.6 vimanams/Gopurams,with Combination Mortor 1.1.4 complete including Shaping the mukhapathram, mahanasi, koodu all of shaped/chiseled bricks, rough plastering with Combination Mortor and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram.

Vimanam 15'

Vimanam 25'

Kalkaram 15'

Painting with multicolour (Panchavarnam) good water based exterior emulson paints complete for the Vinamans/Gopurams. including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material. cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

Vimanam 15'

Vimanam 25'

Painting two coats over the new plastered surface with water based emulsion paint including all materials and labour chrages etc complete.

Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.

Supplying and fixing Country Wood Door and Windows including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with standard specifications.

Painting two coats for new wood works such as other similar works etc, complete complying with std specification

Supplying and fixing MS Grill including the cost and conveyance of all materials and fixing in position including priming coat etc complete.

Painting two coats over new Iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete(with one coat primer)

Plastering with Lime Mortar 1:1.5 mix to 12 mm thick including cost and conveyance ofall materials to site and all labour charges etc complete

Centering for soffits of reinforced cement concrete slabs, plain surface including strutting 3 meter height using MS plates of size 90cmx60cm and 10 gauge stiffen and with welded mild steel angles of size 25x25x3mm laid over silver oak

For Basement

For Plain surface

For Column

Supplying, Fabrication and placing in position of M.S. or RTS rods reinforcement grill in position for all RCC works including cost of steel rods and binding wire etc., complete

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in existing Powder coated MS Duct with door arrangments on wall and ceiling with MS accessories with Module Gl switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 4 SWG T wire for Open MS duct Light point / fan point (for electronic regulator) ( 4 points/ Coil) Higher End.DATА-1

Supply and fixing of single-box-typo 1x 20 W single LED fitting complete with TW round blocks on wall or ceiling with bulb with PVC unsheathed Copper leads from terminals to the fitting. DATA-2

Supply and fixing of 30 W focus light with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting.DATA-3

Supply and fixing of fancy glass shade and 7W /9W LED bulb.

Supply and fixing of 50 W flood light with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copner leads from terminals to the fittino.(Higher end)

Supply and fixing of 100W flood light with integrated driver with necessary wall grouting clamps with fixing bolts on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end).

Supply and fixing of 1 no.6A two module 5 pin socket, 1 no. 6A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End SD 376

Supply and fixing of 2 r.os.6A two module 5 pin socket, 2 nos. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Lower End (SD 381)

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 450 mm (18") sweep wall mounting fan (Higher end) on suitable special type clamps with bolts nuts and nitrile rubber over the stone surface with necessary arrangements and testing complete.DATА-6

Supply and run of 35mm x 20mm powder coated duct with door arrangements complete with MS angle and bolt & nuts Complete.DATA-7

Supply and run of 35mm x 45mm powder coated duct with door arrangements complete with MS angle and bolt & nuts Complete.DATA-8

Supply and fixing of MS elamps of size 1%' x 1%' on pillar with suitable Bolt / nuts and painting of suitable colour. DATА-9

Supply and run of 2 of 1.5 sq.nm PVC insuläted SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC pipe on the existing cable tray with suitable clamps.DAТА-10

Supply and run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheated copper conductor of 110V grade in the existing duting with continous earth wire connection by 2.5 sq mm PVC insulated SC unsheated copper wire.DATA-11

Supply and run of 2 of 4 sq.mm (36/0.3) PVC insulated SC unsheated copper conductor of 110V grade in the existing duting with continous earth wire connection by 2.5 sq mm PVC insulated SC unsheated copper wire.DAТA-12

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 522)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as 5084.09 outgoing on wall with earth connection only. Higher End.(SD 527)

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of0.75 metre and refilling the earth to make good.(SD 669)

Supply and, clarnping of 3 1/2 x 35sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-206)

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection (SD-165)

Supply and providing cable end termination of 3 1/2x35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD 224)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. Gl pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD 457)

Supply and Fixing of Sintex Box (SMC) with 1 no.6-32A SP MCB,16A bakelite connector on a hylem sheet with interconnection complete.(For Street light/Focus/Flood lights).DATA-13(For Street Light)

Supply and clamping of 4 x10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(SD-193) (For Street Light)

Supplyand laying of 4x10sq.mmPVCarmoured LTUGcable inatrench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sandand covering the cable completely with bricks and sand and refilling the earth to make good(SD-180)

Supply and fixing of brass cable gland for 4 x 10 sq.mm. PVC LTUG armoured cable with earth connection.DATA-14

Supply and clamping of 2x10 sq.mm. PVC LTUG armoured cable on post or on wallwith MS clamps.(SD-199)

Supply and Laying of 2 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.DATA -15

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection.(SD-160)

upply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40ADP MCB Isolator as incoming and 4 nos. 6A to 32A SP MCB a outgoing on wall with earth connection only. (Higher End) DATA-16

arthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 222)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection SD 371)

sub total