Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.1 LAccepted-Finance | L1 | Accepted-Finance Lower than L2 and L3 | |
| 2 | L2₹56.4 L+₹3.3 L (6.14%)Accepted-Finance | L2 | Accepted-Finance Lower than L3 Greater than L1 | |
| 3 | L3₹62.2 L+₹9.0 L (17.0%)Accepted-Finance | L3 | Accepted-Finance Greater than L2 and L3 | |
| 4 | Not Admitted-Finance | - | Not Admitted-Finance Others-Require Paper Not Attach |
| Sl No | Description | Qty | Unit | AAYANSH ELECTRICAL SOLUTIONS L1 | M/s Ashu Brothers L2 | BHARDWAJ ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km) | 10 | Qtl. | 450 ₹4,500 Lowest | 500 ₹5,000 | 5,000 ₹50,000 |
| 2.00Carriage of following material from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km). | ||||||
| 2.01 | (a) ST Pole 11/13 mtrs. Long | 5 | Nos. | 1,200 ₹6,000 Lowest | 1,500 ₹7,500 | 8,500 ₹42,500 |
| 2.02 | (b) PCC Pole 11 mtrs. Long | 14 | Nos. | 1,299 ₹18,186 Lowest | 1,500 ₹21,000 | 6,500 ₹91,000 |
| 2.03 | (c) PCC Pole 8.5 mtrs. Long | 8 | Nos. | 1,200 ₹9,600 | 1,100 ₹8,800 Lowest | 5,500 ₹44,000 |
| 2.04 | (d) XLPE Cable 3x70/3x120/3x185 | 2,500 | Mtr. | 35 ₹87,500 Lowest | 50 ₹1,25,000 | 80 ₹2,00,000 |
| 2.05 | (e) Dog Conductor | 11 | Km | 7,999 ₹87,989 | 12,000 ₹1,32,000 | 6,000 ₹66,000 Lowest |
| 3.00Erection & Fixing of following pole in 11 KV line after digging of suitable pits. Work including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge. | ||||||
| 3.01 | (b) PCC Pole 11 mtr. Long | 14 | Nos. | 3,500 ₹49,000 Lowest | 4,500 ₹63,000 | 6,500 ₹91,000 |
| 3.02 | (c) ST Pole 11/13 mtr. Long | 1 | Nos. | 3,500 ₹3,500 Lowest | 4,500 ₹4,500 | 4,500 ₹4,500 |
Tender Value
₹56.3 L
EMD Value
₹56,260
Closing Date
16 Sept 2025, 12:00 pmClosed
SUPERINTENDING ENGINEER
SUPERINTENDING ENGINEER EDC HAPUR
11 KV CABLE LAYING WORK, EARTHING OF DISTRIBUTION TRANSFORMERS IN THE AREA OF EDD-HAPUR UNDER BUSINESS PLAN 2025-26. 7 NO. WORK
2025_PVVNL_1071556_1
24(W)/EDCH/2025-26
Open Tender
Electrical Works
Item Rate
HAPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SUPERINTENDING ENGINEER, EDC, HAPUR
₹56,260
Yes
27 Sept 2025
5 Sept 2025
16 Sept 2025
5 Sept 2025
16 Sept 2025
5 Sept 2025
Amount
Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km)
Carriage of following material from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km).
(a) ST Pole 11/13 mtrs. Long
(b) PCC Pole 11 mtrs. Long
(c) PCC Pole 8.5 mtrs. Long
(d) XLPE Cable 3x70/3x120/3x185
(e) Dog Conductor
Erection & Fixing of following pole in 11 KV line after digging of suitable pits. Work including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.
(b) PCC Pole 11 mtr. Long
(c) ST Pole 11/13 mtr. Long
Erection of double pole structure with all accessories on following pole fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms. All clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, will be provided by contractor. work include jumpering etc work, as per direction of site incharge.
(a) PCC Pole 8.5 mtr. Long
(c) ST Pole 11/13 mtr. Long
Laying of 140/160mm O/D PN-4PE-80 PN-4 grade UV stabilized HDPE pipe as per IS of 6meter, for laying of underground Cable as per RESPO/Norms, including cost of above HDPE pipe, as per direction of site incharge.
Laying of 11 KV XLPE Cable of size 3x70/3x120/3x185 sq.mm undergound into HDPE Pipe, spare cable shall be left in the loop shape at both ends as per RESPO/Norms, as per direction of site incharge.
Laying of 11KV XLPE Cable 3x70, 3x120, 3x185sq.mm overhead and completion work properly, as per RESPO/Norms, and as per direction of site incharge. Work include cost of all clamps, nut bolts etc. will be use for cable work.
Making and filling of 11KV Cable Jointing Kit, Indoor/outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms, and as per direction of site incharge. only cable box will be provided by department
Fabrication & Fixing of T-Channel on pole by providing Holding Clamps, F-Clamps & Proper size nuts & bolts, as per RESPO/Norms and as per direction of site incharge.
Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.
Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.
Grouting of following ST/PCC supports in CC 1:3:6 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge. All the material will be proviede by contractor.
PCC Pole 8.5 mtr. Long
ST/PCC Pole 11 mtr. Long
Wrapping of barbed wire on 11KV ST/PCC poles as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a hieght of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts and all other required material and T&P., as per direction of site incharge.
Laying , Stringing and final sagging of ACSR Dog Conductor, as per RESPO/ Drawing Norms and as per direction of site incharge.
Providing & Fixing of G.I. pipe 6"dia Class-B over 11KV/33 KV XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends, as per direction of site incharge.
Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.
Safely dismantling work properly and carriage of old & used STP pole & other material from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Safely dismantling/removal and carriage of old & used ACSR Weasel Conductor from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.
Providing and installation of maintenance free multifaceted proactive and corrosion free chemical earthing electrod size 80mm x 3000mm complete with 50KG backfill compound with all required accessories for Body/neutral earthing of Transformers, including cost of M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms and as per direction of site incharge.
Jumpheing work of LT/HT line for proper energization of line.
Supply and fixing of route marker in the route of UG cable as per RESPO norms.
M/s Ashu Brothers (BID ID -5537855)
BHARDWAJ ENTERPRISES (BID ID -5534854)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .