Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹21.2 L+₹24,454.30 (1.16%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L2 | Rejected-Finance L2 | |
| 3 | L3₹22.1 L+₹1.1 L (5.18%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹23.2 L+₹2.2 L (10.6%)Rejected-Finance | L4 | Rejected-Finance L4 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
11 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
CERTAIN REPAIR TO FAFA THIMMAIAH, FAFA NALWA INCL MAP NALWA ROAD AND MH COLONY UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT
2023_MES_603092_1
GE/JULL/ET-21/2023-24
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹50,000
Yes
5 Aug 2023
13 Jun 2023
19 Jul 2023
13 Jun 2023
11 Jul 2023
29 Jun 2023
Amount
Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and directed.
Material and labour for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in sub base of flooring complete all as specified and directed.
Material and labour for 75mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth with using extra cement complete all as specified and directed.
Material and labour for chequered cement concrete tiles 30cm x 30cm x 18 to 20 mm thick set with grey cement and pigments jointed and pointed in neat coloured cement slurry in floors over and including 15 mm thick cement screed bed in cement mortar (1:6) including demolition of old tiles/concrete floor all as specified and directed
Material and labour for laying 60mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS-15658-2006 of M-35 grade with grey cement and pigment including demolition of old paver blocks complete all as specified and directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE
Material and labour for 25mm sand cushion, filling 30mm under floors or in foundations including watering and consolidation complete all as specified and directed
Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sides of rounded or chamfered on edges of interlocking/ chequered tiles, bed block concrete complete all as specified and directed
Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed.
Material and labour for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).
Supply only integral water proofing compound all as specified and directed.
Material and labour for plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified and directed
Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.
Material and labour for preparing new plastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer and one coat of birla white putty complete all as specified.
Material and labour for preparation of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint complete all as specified and directed
Material and labour for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed
Material and labour for hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed
Supply and fixing sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified
Supply and fixing Figured Glass 3.0 mm thick, Pin Head type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.
Material and labour for 25mm thick cement concrete (1:2:4) type B-1 (20 mm graded aggregate) to receive the top layer of tiles complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified
Material and labour for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and including 15mm thick bedding layer CM 1:6 in complete all as specified
Material and labour for coloured glazed tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
Material and labour for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and including 15mm thick bedding layer CM 1:6 complete all as specified
All as per srl item No. 24.00 here-in-before but in skirting and 10mm thick rendering as backing coat of CM 1:4
Supply and fixing 18 to 20mm thick granite (of any type) tiles machine cut , in skirting/dado laid over cement screed 10 mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
Demolition of reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (reinforcement to cut as required to facilitate demolition)complete all as specified and directed
Material and labour for reinforced cement concrete (1:2:4) type B-1 (20 mm graded aggregate) slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
Material and labour for MS TMT bars 10 mm and over dia and cut to length, bent to shape required including cranking bending spirally for hooping for clos hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed
Material and labour for form work to soffits of suspended slabs such roof slabs, floor slabs, shelves, landings and similar work, not exceeding 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc. complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.
All as per srl item No. 32.00 here-in-before but area exc 1.5 Sqm and not exc 4 Sqm each.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.
Material and labour for framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.
Supply and fixing 35mm thick IInd class hard wood plain framed factory made panelled shutters with (2 panel ) of 9mm BWP commercial ply of 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically treated complete all as specified
Supply and fixing glazed and skelton shutters factory made 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) complete all as specified and directed
Supply and fixing steel window/ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter:- (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 Nos per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 Nos per leaf. (c) MS tower bolt 150mm long- 2 Nos per leaf. (d) z section 20mm x 25mm, 100mm long stopper - 01 No per leaf. (e) MS pintal hinges of size 75mm x 12mm- 2 Nos per leaf. (f) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grill/ flat iron and glass panes/ wire mesh shall be measured and paid separately under respective item of this BOQ.
All as per srl item No. 38.00 here-in-before but in gauzed shutters without sash bars all as specified and directed by Engineer-in-charge
Supply and fixing mild steel framed work such as guard bars/grills, grating etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, railings etc and similar works including one shop coat of zinc chromate primer complete all as specified.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing
Supply and fixing PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing
Supply and fixing in repair floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed by Engineer-in-Charge
Supply and fixing galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed.
Supply and fixing in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed.
Supply and fixing 250mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.
Supply and fixing 100mm size butt hinges medium weight cold rolled mild steel all as specified
Supply and fixing100mm size stainless steel butt hinges for fixing to PVC doors all as specified.
Supply and fixing 200mm long mild steel tower bolt stove enamelled black with bright bolt all as specified.
Supply and fixing 150 mm mild steel pressed handles oval type, stove enamelled black all as specified.
Material and labour for preparation of new wood surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified
Material and labour preparation of new or previously untreated steel surfaces of any description, n. exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
Supply and fixing aluminium anodised tower bolts 200 mm size fixed with machine screws complete all as specified and directed.
Supply and fixing aluminium anodised Bow Handles 150 mm size fixed with machine screws.
Supply and fixing mild steel 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed
Taking up of or down steel tubing and connections 15mm bore complete all as specified and directed.
All as per srl item No. 56.00 here-in-before but 20mm bore
Supply and fixing 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.
All as per srl item No. 58.00 here-in-before but for 20mm bore tube
Supply and fixing in repair Stop valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron complete all as specified and directed.
Supply and fixing in repair 15mm angle stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and complete all as specified and directed..
Supply and fixing in repair Bib tap cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.
Supply and fixing in repair squatting pan WC Orissa pattern size 580 x 440 mm white with integral foot rest with P or S trap including provn of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified and directed
Supply and fixing in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern) including seat cover and flushing pipe for pedestal pipe etc. complete all as specified and directed
Supply and fixing in repair seat cover for water closet pedestal pattern all as specified
Supply and fixing in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brackets complete all as specified and directed
Supply and fixing PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete fixed in repair complete all as specified and directed.
Supply and fixing in repair health faucet (ABS body)mild steel chromium plated suitable for 15mmdia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed
Supply and fixing in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .
Supply and fixing in repair acrylic corner set of 3 pieces as per sample approved by Engineer-in-charge all as specified and directed
Supply and fixing 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position including dismantling of existing tank of any description complete all as specified
Supply and fixing in repair 20mm for ball valve high pressure, PTMT with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and directed
Supply and fixing in repair Pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union in repair complete all as specified and directed.
Supply and fixing in repair vitreous china wash hand basin, white flat, size 550 x400 mm including brackets waste coupling and waste pipe all as specified and directed by Engineer-in-Charge
Supply and fixing in repair brass CP wash hand basin mixture with capstan heads, chromium plated, screwed down high pressure, with lettered "hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes and fixed in repair for mixing hot &cold water screwed down for iron pipe and fixed complete all as specified and directed
Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers including cantilever cast iron brackets, connecting union, waste coupling and waste pipe overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed
Material and labour for mild steel pipe 25 mm dia curtain road with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade including taking down old curtain rod as approved by GE complete all as specified and directed.
Material and labour for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement (diameter of outlet in 75mm) including taking out damaged floor trap in any type and position complete all as specified and directed
Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage at any circumstances (Kitchen, Bathroom and Toilet) all as specified and directed by Engineer-in-Charge. Make:- WACKER SILICONES (GP Silicone Sealant )
Supply and fixing in repair PVC waste pipe for WHB, Sink and urinal complete all as specified and directed
Demolition and braking up drain pipes AC/PVC pipe upto 150mm size including all fittings complete all as specified and directed
Supply and fixing 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
All as per srl item No. 84.00 here-in-before but 75 mm dia
Supply and fixing PVC (SWR) bends 110 mm with access door complete all as specified and directed.
All as per srl item No. 86.00 here-in-before but 75 mm with access door
Supply and fixing for 110mm PVC (SWR) vent cowl complete all as specified and directed.
Supply and fixing Brass chromium plated tubular towel rail 20mm dia , D type, 60cm long between flanges in repairs complete all as specified and directed
Supply and fixing in repair CP grating 125mm dia with centre hole all as specified and directed by Engineer-in-Charge
Demolition of brick work built in cement mortar including all quoins, arches pillars etc but excluding precast concrete articles all as specified
Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) all as specified.
All as per srl item No. 92.00 here-in-before but except bricks
Demolition of brick tiles single layer as in roof covering complete all as specified
Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) all as specified
Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed
Material and labour for 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by scraping down with water etc all as specified and directed by Engineer-in-Charge
Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V-groove filled with repairs mortar/ microconcrate/ general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight complete all as specified and directed.
Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator” complete all as specified and directed
Material and labour for repairing of R.C.C projections, chajjias, roofs, facia and ceiling etc by necessary preparation. Scarping, cutting, chiselling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2 kg per sqm but n.exc 3kg/sqm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engineer-in-Charge
Material and labour for cement concrete (1:5:10) type E-2 (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified and directed
Material and labour for cleaning of cracks & filling of cracks with SIKA latex SBR 100 putty/ Dr fixit 302 SBR latex/ Perma latex SBR/ FORSROC Nitabond SBR latex/ Asian Paints latex as required. Apply one coat of Acrylic modified cementitious coating of SIKA top Seal-107/Brush Bond FOSROC/ Dr Fixit/ STP/ CICO as per manufacturers instructions. Apply glass fabric sheet of SIKA fab 1/ FOROC/ Dr Fixit/ STP while the first coat is wet. Providing and applying a protection screed of 50mm thick in CM (1:4) mixed with Sika platocretere over the applied water proofing coating on horizontal surface. All the corners and joints should be pretreated with elastic waterproofing sealing tape with woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/ FOSROC/ Dr Fixit/ STP. The APP membrane should be placed before placing of concrete complete all as specified and directed. Note : Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturers and approved by GE
Material and labour for 15mm thick cement screed in CM 1:3 admixed with integral water proofing compound on wall and sunken floor including PCC (1.1.5.3) (using 12.5mm thick graded aggregate) in fillet at corners shall be provided complete all as specified
Material and labour for flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified
Material and labour racking out joints/ pointing, hacking for key, scrubbing down with water compete all as specified and directed.
NATIONAL BUILDERS
THAPAR CONSTRUCTION COMPANY
Motorway Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .