REPAIRS TO PLASTERING, SANITTARY FITTINGS, FLOORING, ROOFTREATMENT AND WALL PANELLING ETC AT LGJ MIL STN

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as directed.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site all as directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified & directed.

Dismantling wall and Ceiling boards (Fibre, pulp,insulation etc) or insulation boards/slabs/ blankets of any thickness including cover fillets complete all as specified and directed.

S&F mineral fibre accoustical suspended ceiling system with ANF (Micro look) EGE tiles with silhouette exposed grid. Colour shall lbe white, fire performance class 0/class 1 (BS 476) in module size of 600mm x 600mm x 15mm with bioblock coating on the face of tiles. Suitable for green building application with recycle content of 63%. The tiles shall be laid on silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white / black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68 kg/Sqm. Silhouette, main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction. The Tee section have a galvanised of 125 gms/Sqm complete all as specified and directed by Engr-in-Charge. Make : ARM STRONG, AEROLITE, HUNTER DOUGLAS

S & F in repair 8 mm thick polycabonate sheet of any colour as in wall cladding resistant to impact and fracture, fixed to frame complete all as specified and directed

S & F for 2 mm thick fibre glass reinforced translucent plain sheeting with 15 cm side lap fixed with coach screw and washer in roof, wall etc

S & F in repair 12 mm thick toughened glass for glazed door fixed including hydraulic floor spring, stainless steel locking arrrangement, 250 mm stainless decorative door handle both side with all accessories complete all as specified and directed by Engineer-in-charge

Taking down cement or cement lime plaster of any description on brick or stone walls or concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M&L rendering 15mm thick cement plaster on brick walls or concrete, surface in cm 1:6 on wall and surface to be finished and even smooth without using extra cement complete all as specified & directed

M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 and even and smooth in mortar all as directed.

M & L rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified & directed by Engr-in-charge.

M&L for two coats of acrylic distemper on newly plastered surfaces of walls over a coat of primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M&L preparing newly plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engr-in-charge

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint complete all as specified & directed by Engr-in-charge.

M & L for finishing wall with Acrylic Smooth exterior paint of required shade: New work(Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) and including preparation of wall complete all as specified and directed

M & L for complete removal of existing treatment from wall any description brooming down or steel wire brushing; scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots complete all as specified and directed

M & L for 3 mm thick wall care putty on wall complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and including dismantling existing complete all as specified and directed

S & F in repairs anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operational handles and fixing approved anodised aluminium standard section around opening, all compelte as per requirement and dirction of Engineer-in-charge

Disconnecting existing tanks capacity exc 250 but n. exc. 500 litre, setting aside or lowering if required for repair, cleanning etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks capacity exc 500 but n. exc. 1000 litre, setting aside or lowering if required for repair, cleanning etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (minimum weight shall not be less than 210 gms)

S & F in repairs connection Nipple 20 mm bore PTMT suitable for HDPE water tank complete all as specified and directed by Engr-in-Charge. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)

Taking down 15 mm dia steel tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe all as directed.

Taking down steel tubing and connection including cleaning for refixing or removing to store bore of pipe 20 mm complete all as specified and directed by engr-in-charge.

Taking down steel tubing and connection including cleaning for refixing or removing to store bore of pipe 25 mm complete all as specified and directed by engr-in-charge.

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

S&F 20 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

S&F 25 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as directed.

Dismantling water tank (any type) exc 250 but n. exc. 500 litre capacity and remove from site complete all as specified and directed by Engineer-in-Charge.

S&F for Rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top, ISI marked hoisted and fixed in position all as specified in SSR part-I. including 20 mm bore PTMT float valve, connection nipple 2 Nos complete all as specified and directed..

Dismantling water tank (any type) exc 500 but n. exc. 1000 litre capacity and remove from site complete all as specified and directed by Engineer-in-Charge.

S&F for Rotational moulded polythene water storage tank 1000 ltr capacity vertical with closed top, ISI marked hoisted and fixed in position all as specified in SSR part-I. including 20 mm bore PTMT float valve, connection nipple 2 Nos complete all as specified and directed..

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed in repair all as specified and as approved by GE/Engineer-in-Charge.

Taking down PVC soil, waste & rain water pipe 100/75 mm dia including fittings fixed to walls, laid in floor etc complete all as specified and directed by Engr-in -Charge.

S&F110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls including necessary clamps complete all as specified & directed by Engr-in- charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

M&L for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxid primer complete all as specified and directed by Engineer-in-charge.

S & F in repairs Vitreous China urinals, half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe complete all as specified and directed.

S&F in reapirs Wash basins, Vitreous China (flat back or angle back type) size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S&F in repairs PVC valve less, syphonic action type flushing cistern,10 ltrs capacity low level, white, with inlet ball valve, float, handle and connection to pipe and flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern all as directed.

S&F repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) set in and including concrete fixed all as specified.

S & F in repairs pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed. (Wt not less than 450 gms)

S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long.

S&F in repair tubular towel rail stainless steel 20mm dia 'D' type 60cm long between flanges complete all as spd & dir by EIC.

S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type fixed all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed.

S & F Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.25 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in CM 1:6 complete all as specified and directed

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in dado/skirting over and including 10 mm thick rendering on vertical surface in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge

M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engneer -in-Charge

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bedding in cement mortar 1:6, all as specified and directed.

M & L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint complete all as specified and directed by Engr-in-charge.

S&F 32 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors all as directed.

S & F in repairs 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

Taking down shutter of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed.

Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site all as specified & directed

Supply and fixing of Fibre glass Reinforced plastic (FRP) door frame of required colour in three legged of cross-section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick including laminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat(CSM) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides MS stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in- charge.

Supply and fixing of 30 mm thick glass fibre reinforced plastic (FRP) paneled door shutter conferming to IS:14856-2000 of required colour and made with fire retardant grade unsaturated polyster resin,moulded to 3mm thick FRP laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings,cast molithically with 5mm thick FRP laminated for panels including fixing to frames,complete all as specified and as directed by Engineer-in- charge.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conoforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

Supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters (Two panels) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated all as specified & directed

S&F 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as specified & directed by Engr-in-charge.

S&F 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engr-in-charge.

S&F 100 mm long butt hinge, medium weight, cold rolled mild steel all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed all as specified & directed by Engr-in- charge.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete mild steel fixed complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 4.0mm sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.

S&F for 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed.

M&L preparation of new or previously untreated wooden based surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified.

M&L for preparation of old or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply one coats of synthetic enamel paint all as specified.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivote made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as per specification and directed

S& F in repairs pillar cock swan neck fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed. Note :Wt not less than 450 gms

S&F in repair stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as directed.

S & F 3 mm thick figured glass, pin head secured with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F in repairs grating doom PTMT 100 mm dia with waste hole complete all as specified and directed

S&F in repairs grating doom PTMT 125 mm dia with waste hole complete all as specified and directed

M & L mild steel rolling shutters, with out ball bearing, thickness of laths 1.00 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

PAREEK AND COMPANY

ram rattan dass aggarwal

Engineers CXonstruction Company

M/S Shree Ram Enterprises