SPL REPAIRS TO BLDG NO P-229 AND P-230 AT 16 RAJPUT UNDER GE(EAST) LUCKNOW

Amount

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling etc including raking out joints, hacking for key & scrubbing down with water all as specified.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 fair surface of ceiling finished surface even and smooth without using extra cement all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coat of oil emulsion distemper (OBD) over 2 mm wall care putty on wall, approved shade/tint all as specified & as directed

Prepration of new surface of wall and applying two coats of cement based paint white or tinted complete all as specified.

M&L Prepration new plastered surfaces and applying two coat of white wash on ceiling all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 Sqm but n.exc 4 sqm each all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area n.exc 1.5 Sqm each all as specified.

S&F for in repair three layer rotational moulded polyethylene water storage tank cylindrical hoisted & fixed in position incl dismantiling water tank complete all as specifed capacity 1000 ltrs.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight -210 gms. Make Prayag/Polytuff

S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down Make: Jindal/TATA.

S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including taking down Make: Jindal/TATA.

Dismantling of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar

M&L, 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, all as specified and directed

S&F vitrified ceramic tiles dark/light shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over 15mm thick screed bed 1:6 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified. Make : Somany,/Johnson/Kajariya

M&L Glazed ceramic tiles (coloured) in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 19-20mm thick over cement screed bed 15mm thick in CM 1:6, base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for beeswax polishing on existing Kota stone incl where required refixing complete all as specified.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 20-22 mm thick, set, jointed and pointed in neat cement slurry with gray cement and pig mentss over 15mm thick screed bed 1:4 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specifiedin floor, paving, path etc

S&F exterior tiles(Heavy duty) of superior quility 400x400x10-12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed.

Providing and fixing of E-board 'Everest' or equivalent make 600 x 600 x 4mm thick white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc.

S&F 85x45mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum all as specified and directed. Make: Rajshree/Sintex

S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side 14 micron Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F for Pressed steel frames for doors (165 x 60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified, supplied and fixed

S&F for Pressed steel frames for doors (125 x 60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified, supplied and fixed

S&F 30 mm thick flush shutter solid core construction with black board core and plywood face panels commercial type on both sides with 1.5mm thick wooden finish veneering and polishing complete all as specified.

S&F for 2nd class hard wood 30 mm thick glazed and skeleton shutters made of second class hard wood in 4 pannel, open rebated and prepared to receive glass, gauze etc edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (b) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, all as directed.

S&F for XPM Aluminium alloy wire cloth of wire for skelton dooe all as specified and directed.

Providing & fixing of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. (Make: Elixir Met Form Pvt Ltd or equivalent or as approved by concerned GE

S&F powder coated aluminium anodised frame/chowkat of Alu door fixed with rawal plug and screw or wire expansion hold fasteners make Jindal/Hindalco

Providing and fixing powder coated aluminium partly glazesd and partly paneled sliding door shutter using 1.50mm thick standered door section having size of styles, top rails 83x44mm where as bottom rails will be made up of 100x44mm Make: Jindal/Hindalico including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass and pannelling shall be provided with 6 mm thick HPL board with both side choice laminations, complete all as specified and directed.

S&F powder coated alumium glazed window shutter sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm Make jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass Make- Modi guard/saint gobin) and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as specified

Anodised aluminium Grill (anodised tranparent of dyed to required shade according to IS1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the exiting window frame with CP brass/ stainless steel screws @200 mm centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Enginer-in-charge.

S&F for 1.5 mm thick powder coated anodized aluminum partition wall partly paneled and partly paneled and partly glazed size of aluminium section 44x44x1.5 to 1.8 mm thickness divided into square or rectangular (not exc. 1.20 Sqm each panel ) in shape top panel shall be glazed with 5.50mm thick sheet glass any shade and design make modi/ saint gobin & bottom panel shall be 6 mm thick HPL board with both side choice laminations including necessary joining cleats glazing clips rubber packing, anodized aluminum snap beading screws, complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 4.8mm thick sheet glass ordinary quality and glazing with oil putty/Aluminium beads in square exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces ground or obsecured to one side complete all as specified. Make : Modiguard/Saint Gobin/Atul

S&F 18 mm thick solid WPC board one side prelaminated decoratiove teak face and other side white and balancing including all theedges shall be covered with 2mm thick edge bounding tape as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc including dismantling, complete all as specified and directed

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws.

S&F 250 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolts all as specified

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 125 mm size aluminium alloy handles fabricated type extruded section ,ISI marked all as specified

S&F 150 mm size aluminium alloy handles fabricated type extruded section ,ISI marked all as specified

S&F Butt hinges 125 mm stainless steel hinges medium weight and fixed

S&F Butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinges pin anodised type B-21 and fixed to PVC frame

M&L for preparation of newly wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed in repairs.Make :Cera/Periware/Hindware

S&F Plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S&F Vitreous china squatting pan Orissa pattern size 580x440 mm white with P or S trap front or back inlet with integral foot rests (excluding flushing cistern and flush pipe ) complete including provision of lime concrete bedding add if fixed in repair.

S&F 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made Make : Parry ware/Slimline/ Cera

S&F Vitreous china wash hand basin white angle back size 550x400 mm including 32 mm dia CP waste coupling long screwed shank fly nut flanged end and embedded in lead to waste pipe excluding piller taps complete fixed specified and directed by enginner -in-charge fixed as in repair Make : CERA/Peryware/Hindware

S&F Vitreous china urinal, Half stall type white(excluding flushing cistern flushpipe and washte pipe) compete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws pointing around urinal back in cement fixiing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including connections to flushing pipe and outgoing pipes fixed in repair.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall including down all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall all as specified and directed by Engineer-in-charge.

S&F 110mm bore PVC (SWR) bends, any radius.

S&F PVC (SWR) bends any radius of 75 mm dia all as specified.

S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement

S&F 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions

S&F in repair 15 mm dia Pillar tap cast copper alloy chromium plated fancy type with capstan head and cup screwed down screwed for G I pipe or for brass ferrule all as specified.

S&F CP concealed stop cock for 15 mm bore pipe fixed as in repair

S&F 15mm dia fancy type chromium plated angle valve/cast copper ally screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI Pipe.

S&F in repair health feucet to EWC CP brass with minimum 1500mm long CP flexible pipe connection etc, complete all as approved Make : Parryware Cat No T9940A1 or equvailent .

S&F in repairs 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner all as specified.Make: Jaguar /ESS-ESS/Prayag

S&F as in repair CP soap dish any type fixed to plugs with chromium plated brass screws all as specified.

S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats

S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair.

S&F in repairs 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gms)

S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified.

Excavating in post holes in hard and dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m

M&L for cement concrete type D2 1:3:6 (40mm graded aggregate) in foundation, filling and mass concrete.

S&F M.S framed work such as post, purline truss etc with ends of bars sholdered and /or riveted into spikes framed guard bars/railing all as specified.

S&F for mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE410-W (Gde E-250)

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of oil emulison distemper (OBD), complete, all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete, all as specified & as directed.

M&L waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm, of its equivalent after Complete removal of existing treatment by scrapping with TrueCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour over the plastered/old painted wall as required at site after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour. Step 1) Mix the putty powder by adding 40-50% water and mix it with Putty mixer(Trucare Putty mixier with min 1400 W power havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2)Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Graco Spray Machine(Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3) Allow 6-8 hrs time to dry the putty surface

Material and Labour for applying two or more coats of 100% premium acrylic emulsion paint enhanced with PU serum, colour stay technology having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance exterior, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed by Engineer in Charge.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) all as specified and directed by Engineer-in-charge.

Taking down carefully Submain wiring any size complete including all electrical fittings & fixtures etc all as specified and directed by Engineer-in-charge.

Taking down carefully any Light fittings/fixtures/Ceiling fan/wall fan/Ex fan any size complete including all (electrical fittings & fixtures etc) all as specified and directed by Engineer-in-charge.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

All as per Item No 89 hereinbefore but for One 5 A socket outlet on independent Board all as specified and directed.

All as per Item No 89 hereinbefore but for One 5 A socket outlet on same Board all as specified and directed.

All as per Item No 89 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Supply and fix frame plate with match cover three module all as specified and directed.

All as per item No.93 above but six module all as specified and directed.

All as per item No.93 above but eight module all as specified and directed.

All as per item No.93 above but Twelve module all as specified and directed.

Supply and fix terminal box suitable three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

All as item No 97. above but six modular plat of size 210X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

All as item No 97. above but eight modular plat of including cutting, grooving and plastering etc. all as specified and directed.

All as item No 97. above but Twelve modular plat of including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module all as specified.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified.

Supply and fix Modular Regulator 230V AC 50 HZ SP two module all as specified.

Supply and fix PVC Ceiling rose all as specified.

Supply and fix TV Socket 1 Module Modular all as specified and directed by Eng-in-Charge

Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, Make- Philips or Eqv to Havells/Bajaj

Supply and fixing decorative fancy type LED lighting fixture Single brass made bracket with 140mmX78mm rectangular base,210mm length U Shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125mm length MS Powder coated down pipe ,mounted on MS powder coated plate, frosted glass shade 155mmX129MM FINISH DULL BLACK POWDER COATEDand lacquer coated suitable for 03 to 5 watt LED bulb with required electrical connection all as specified and directed by engineer in charge. Make-Mepro Cat No- MBBS-801 or Equv Philips/Havells

Supply and fixing decorative fancy type LED lighting fixture double light brass made bracket with 220mmX86mm rectangular base,210mm length U Shaped brass arm 60 mm dia gallery with 2 pin brass holder tipped with 125mm length MS Powder coated down pipe ,mounted on MS powder coated plate, frosted glass shade 155mmX129MM FINISH DULL BLACK POWDER COATEDand lacquer coated suitable for 03 to 5 watt LED bulb with required electrical connection all as specified and directed by engineer in charge. Make-Mepro Cat No- MBBS-901 or Equv Philips/Havells

Supply and fix brass coating fancy wall spot/Display/picture light with adjustable head and colour changing fucntion 12W all as per directed.

Supply and fixing recess mounting LED light fitting 2'x2' luminaire architectural recessed luminaire with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effect and Fixture should have an operating voltage range of 140-270VAC incl It should have over voltage protection @320V Cut-off with auto restart features. all as specified and directed by engineer in charge. Make- Philips or Eqv to Havells/Bajaj

Supply and fixing surface mounting LED light fitting of 20/25 watt white powder coated CRCA housing with LEDs.,efficacy 100 lumen/watt,CRI>80 and pf>0.9,surge protection 2.5 KV, Seamless front frame with flat white high transmission acrylic cover all as specified and directed by engineer in charge. Make- Philips or Eqv to Havells/Bajaj

Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 100 lm/wat ,6500K with IP 65 &ik-08 protection comprises of polycarbonate cover, etc complete all as specified and directed.

Supply and fix 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66,IK-10 single piece die cast incl spigot, dia 48-76mm,LED lifetime (L70B50) 75k Hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, incleds dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module,surge protection as perIEC 61000-4-5 incl MS Clamps and bracket of 40mm dia and farsnut for fixing the light all as specified and directed by engineer in charge. Make- Philips Model No- UrbanedgeD2DBR501 or Eqv to Havells/Bajaj

Supply and fix in rep[air of MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix in rep[air of MCB DB TPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. Make:- Havells/L&T/ABB/Sechinder/Indo-Asian (b) MCB, SPN, AC, 240 volt of 40 Amp, "C" curve, 10 KA breaking capacity - 08 Nos. Make:- Havells/L&T/ABB/Sechinder/Indo-Asian

Supply and fix MCB SP 230V, 6-32 Amps capacity all as specified and directed.

Supply and fix MCB SPN 230V, 6-32 Amps capacity all as specified and directed.

Supply and fix MCB TPN 415V, 32 to 63 Amp capacity all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB all as specified and directed

Supply and fix mushroom LED Bollard 10W, 800 lumen light, new generation, energy saving, environmental friendly, long life aesthetically designed weather proof luminarie IP-65 and IK-07 protection die-cast aluminium landscape luminaire for downward lighting with high power LED as light source, Surge protection 100V-240V all as per directed. Note: All civil work and earth work for fixing the pole is included in the item rate and NO EXTRA payment will be done to the contractor Make- Philips Model No-BCP100 LED CW/NW/WW10W PSU GR L 750mm Or Equ in Havells/Crompton

M&L for laying 6 sqmm two core aluminium cable incl 25mm dia PVC Conduit and all other connected items all as specified and directed by Eng-in-Charge.

Supply and fix LED gate light of 35/36W LED Postop luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Suitable for pole mounting having OD of 60 mm and height of 6 meters. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, all as specified and directed by engineer in charge. Make- Philips or Eqv to Havells/Bajaj

Supply and fixing storage water heater (Geyser) of capacity 50 ltrs, 230 volts, power consumtion 230V, vertical type, Rated pressure 5.6 bar pressure rating more than 8 bar suitable for high rise buildings,rust and shock proof ABS Outer body for lomg life,Stainless steel inner tank of 304 grade,65 MPa bar pressure,automatic shut off including four nos of rag bolts and making the elctrical / water supply connection including testing after installation complete all as specified and directed by Engr-in-Charge. Make-HAVELLS or Eqv of Jaguar

Supply and fixing ceiling fans ( COPPER WINDING) complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed. Note:- Down rods of suitable length( 4feet,5 feet or 6 feet) is incl in the item rates and no extra payment will be done to the contractor for the same.

Supply and fix of lithium based energy efficient integrated all-in-one solar street light of Min 18 Watt plus/minus 2% ( Min 3000 lm) IP-65 &IK-08,pressure die cast, battery capacity min 20Ah@ 12.8V or 256Wh, panel capacity min 60 Wp with duly polyurethane coating (camaflouge colour),encases with monocrystaline solar PV panel of 65-67 WP(170/180 lm/watt) lamp with aluminium reflector for better light distribution CRI>70 COLOUR TEMPERATURE 5700-6500K microcontroller basedcharge controller cum driver automatic diming function (first four hour at full brightness and rest of time at lower light level with PIR motion sensor dusk to dawn operation suitable to working temperature -10 to 55 C weight not less than 14-16 kg with adjustable MS clamp suitable for pole wall mounting etc complete as req protection short circuit overload reverse polarity and battery protection firm should provide vital parameter test report from NABL accredited lab and should be made in India with CE and ROHS complaint. Make- Axxon/Philips/Tata/Havells

Supply and fixing steel body Ex-fan 450 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm all as specified and directed. Make:- Bajaj/Havells/Crompton/Usha

Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel ,watering pipe etc. all specified and directed including testing on completion.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth.

QUALITY CONSTRUCTIONS CO (BID ID -3283321)

Abode Artisan Enterprises (BID ID -3286321)

M/S KAUSHIK CONSTRUCTION (BID ID -3283747)

MS SANTOSH KUMAR SINGH (BID ID -3283671)

m/s raghubar dayal (BID ID -3283529)

GANGA TRADERS (BID ID -3282941)