GE/BENG/26 OF 2020-21 PROVN OF CEILING FAN, LED SECURITY LIGHT, SENTRY POST, SOAK PIT, SYNTEX, GARBAGE BIN WITH IRON GATE, MONKEY PROOF CAGING AND CERTAIN SPL REP WKS OF VARIOUS UNITS UNDER AGE B/R-II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismentling of timber scantlings 40 sq. cm and over in any section in any postion complete all as specified and directed.

Ditto but in fillet , rails, posts, rafters,purlins etc. under 40 sq. cm in section etc complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250 quality-B) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long, 11mm to 15mm dia of neck complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and directed.

S&F 6mm thick plain non asbestos fibre cement designer building boards fixed or laid/inserted to timber/GI/aluminium framework wih screws complete all as specified.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as backing coat of dado/skirting etc. complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as per item no 17.00 above but in vertical surfaces such as dado /skirting complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free (350mm x 450mm) x 7 to 8mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Demolition of brickwork masonry built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item no 22.00 above but except bricks

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, in one brick thick honeycomb walling built in In cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) WPC as per manufacturer's instructions, surface finished even & smooth without using extra cement complete all as specified and directed. (Note;- WPC will be measured paid seperately as supply only)

M&L for rendering 15mm thick in cement mortar 1:3 using WPC as per manufacturer's instructions in finishing layer on brick or concrete surfaces finished even & fair complete all as specified and directed. (Note;- WPC will be measured paid seperately as supply only).

Supply only liquid water proofing compound complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in roofs, floors above ground floors not exc 15cm thickness complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 37.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 using 20mm graded crushed stone aggregates in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 using 20mm graded crushed stone aggregates in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 using 20mm graded crushed stone aggregates in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC 1:1.5:3 type A-1 using 20mm graded crushed stone aggregates as in chajjas, shelves complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise complete all as specified including removing of existing roof treatment complete all as specified.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each including mongries (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.

Taking down chowkats or frames n exc 1.5 Sqm each including mongries (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.

S&F 1.25mm thick pressed steel frame door 165 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 1.25mm thick pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F S&F of 35 mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 35mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm Butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F for Steel window with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Ditto all as per item no 58.00 above but without glazing bars complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty in squares n. exc 0.50 sqm in each pane complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged in spikes, framed guard bars and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for applying one coats of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper of approved tint over a coat of chalk whiting primer on wall including two coats of Birla/Asian wall care putty complete all as specified and directed.

M&L for preparation of old plastered wall surfaces complete removal existing treatment and applying two coats of oil emulsion distemper of approved tint over a coat of chalk whiting primer on wall including two coats of Birla/Asian wall care putty complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls complete removal existing treatment and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L Hard drawn steel wire fabric in available size weight not exc 4.00 kg/sqm cut to lengths, fixed in tank caging including welding, riveting, framing etc. complete all as specified and directed.

M&L Framed work portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps,bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F rotational moulded polyethene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed.

S&F in repair gun metal glove or gate valve 20mm bore, with iron wheel head, screwed down both ends for iron pipe and fixed complete all as specified and directed.

S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

S&F In repairs Bib taps, 15mm bore cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy with chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for Damp proof course 25mm thick In cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and three coat of white wash on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and three coat of colour wash on wall complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) in manhole cover etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified.

S&F galvanised steel water tubing, 'medium grade' ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors/laid in trenches complete all as specified and directed.

S&F galvanised steel water tubing, 'medium grade' ISI marked, with all fitting and fixed complete to walls and ceilings or laid in floors, 25mm bore complete all as specified and directed.

S&F 100 mm bore Cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F CI Bend (sand cast)( any radius) 100mm dia complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified.

Surface dressing not exc 15cm deep all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Surface dressing n exc 15cm deep in soft/ loose soil complete all as specified and directed.

Excavation over areas not exceeding 1.50 mtr deep and getting out in soft/loose soil complete all as specified.

Excavation over areas exceeding 1.50 mtr but not exceeding 3.00 mtr deep and getting out in soft/loose soil complete all as specified.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

Ditto all as per item no. 97 here-in- before but exceeding 1.5 mtr deep and not exceeding 3.0mtr deep.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation all as specified and directed.

M&L Loose filling with brocken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for coloured with grey cement and pigments Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L for brick work with sub-class 'B' old size bricks of class designation 75 (average compressive strength 75 kg/Cm2) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No 107.00 here-in-before but except bricks only.

SCHEDULE 'A' PART-II (E/M WORKS)

Taking down carefully existing copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

Taking down carefully existing unservicable DB, switch fuse unit, enclosure for MCB DB (inclusive of MCBs of any type and capacity) and making good disturbed surface all as specified and as directed.

M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 110.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 110.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 110.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

S&F switch socket outlet combination 2 in 1, 5 amp, flush piano universal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet combination 5 in 1, pin 5/15 amp, flush piano universal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 6 Amp, 230 volt complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

S&F ceiling fan regulator electronic stepping type, SP 230 volts, suitabe for 1200mm / 1400mm sweep ceiling fan inliding necessary electric connection complete all as specified and directed.

S&F LED tube light fitting 1x 22W, 230 V, with tube 4 feet wall mountedwith 1x20W single tube LED batten ultra bright LED polycarbonate tubelight with very high efficency suited for installation existing T8 tubelight with G13 lamp holders to give glare free light complete all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F lamp holder insulated body PVC/ polycarbonate with back plate with LED lamp 5 Watt suitable for batten fitting complete all as specified and as directed.

S&F Building security LED light luminaire fitting 1X15 W new generation energy saving & envoirmental friendly long life versalite pressure die-cast aluminium IP66 roadway luminarie with high power LEDs as light source and electronic driver with 1.5m long and PC cover having top openning opreate driver compartment all as specified and as directed. (Make Crompton/ Havells/ Bajjaj/ Philips)

S&F ceiling fan 5 star 1200 mm sweep 230 V SP including Fan regulator electronic step type not less than 100 watt complete with accessories and connection with ceiling rose with MS hooke made out of ms flat iron size 25 X 5 mm for hanging of suitable length complete all as specified and as directed.

Fixing only ceiling fan of any size including all electric connection with ceiling rose with replacement of two nos splits pins, one connection block and one rubber seal complete all as specified and as directed. (Note:- ceiling Fan shall be issued under Sch 'B' as free for fixing only)

Fixing only 5 star rating electric water heater storage type geyser of 25 Litre capacity complete all as specified and as directed. (Note:- Electric water heater storage type geyser shall be issued under Sch 'B' as free for fixing only)

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, single door single pole & Neutral 12 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F in sheet metal enclosure with socket plug top and MCB,s Single Pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20Amp, 240 volts complete all as specified and directed.

S&F voltage stabilizer for automatic opertion, capacity 2KVA, single phase naturally air cooled indoor type 7 designed for input variation between 170 V to 250 V with out put voltage stabilized at 230 volt with accuracy of (±) 2.5% and installation of deep freezer complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

S&F MCB SPN 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed.

Supply and errection of steel tubular swaged poles 9.0 metre long, type 410 SP-31 complete with cast iron base plate, final taper plug, bolts, nuts and screws, pole cap etc confirming to IS-2713 of 1980 including painting two coats of aluminum paint over a coat of red oxide primer after necessary preparation of surfaces and numbering to be done in black synthetic enamel paint complete all as specified and directed.

Supply, fixing in repair energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source connecting and testing Astra road way LED street lights of 60 watts capacity and unique peanut lens to ensure uniform distribution complete all as specified and directed.

S&F street light bracket made out of GI tubing medium grade size 32 mm bore 1.20 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair MS flat iron 50mm x 6mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unservicable all as specified and directed.

S&F sintex fibre body looping loopout enclosure of size 150 x 20 x 2 mmthick fixed on porcelin support inside enclosure including MCB SPN 10-32 Amp, 'C' Curve 10 KA breaking capacity -01No. fixing enclosure with pole using 40x6m size MS FI clamps of required shape with bolts, nuts & washers complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part I including necessary excavation and earth work in any type of soil PCC (1:3:6) type C-1 chamber with 40 mm thick pre cast RCC (1:2:4) type B-1 cover slab with TMT bar 8mm dia 150mm long reinforcement, watering funnel, 40mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

S&F street light bracket made out of GI tubing medium grade size 25 mm bore 1.00 Mtr long bend to required shape as in bracket for street light fittings fixed with two pair MS flat iron 50mm x 6mm size and 30cm long clamp of required shape with bolts nuts and washers suitable for steel tubular pole including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unservicable all as specified and directed.

M&L for PVC aluminium stranded conductor 4 sqmm two core for fixing of street light with PVC pole junction box all as specified and as directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Supply & Laying Sub Class 'B' Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed.

Material and labour for galvanized iron tubing 25mm bore light grade with all fitting for protection of cable, laid in trenches/wall/floor incl necessary clamp, bolt/nut if any all as specified and directed. (Note: Excavation, earth work shall be measured and paid separately)

M&L for PCC (1:3:6) type C-2 with using 40 mm grade crushed stone aggregate as in foundation, coping of steel tubular poles and stay with necessary form work (if required) complete all as specified and directed.

M & L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

S&F sheet metal enclosure for MCB, DBs, phosphatised, powder coated, single door, single pole & netural 8 way 240 volt with 200 Amps bus bar at incloming end complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 40,045.50 (refer Tender Srl Page No 38(R)). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

AMULYA KUMAR ROY

M/S JANATA CONSTRUCTION