SPECIAL REPAIR TO LT OH LINE FROM MAIN ROAD TWO POLE LT STRUCTURE NEAR ANNAPURNA TO NSWTTC AT INS MANDOVI UNDER AGE I MANDOVI

Amount

M&L for dismantling old cross arm all as specified and as directed

M&L for dismantling of ACSR or AAC conductors all as specified and as directed

Dismantling old insulators any type, any size all as specified and as directed

Supply ,laying & testing cable XLPE (earthed) insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with stranded aluminium conductor 1100 Volt graded size 3.5 core 120 Sq mm all as specified and as directed

Supply, laying & testing cable XLPE(earthed) insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) with stranded aluminium conductor 1100 Volt graded size 4 core 16 Sq mm all as specified and as directed

S&F DB box suitable for 16 sq mm 4core cable along with glands 02 rings & lugs with 01 No MCB of 6 Amp connector fixed on existing pole with clamp, nut & bolt connections complete all as specified and as directed. Make:Model JSB-1414 of Sintex or equivalent as approved by GE.

Supply and fix cable 2.5 sq mm single core copper cable ( three runs for Phase, neutral & earthing) duly run through and including PVC conduit 20 mm dia properly clamped to pole from DB sintex box to fitting through bracket all as specified and as directed NOTE: 03 runs of copper cable and 01 run of PVC conduit will be measured as one length

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying and removing cable of any sizes and getting out in soft /disintegreted rock soil all as specified and as directed

Returning, filling in with excavated material including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata all as specified and as directed

Removing excavated material to a distance not exceeding 50m, depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed

Supply and lay dry river sand in trenches for cable protection all as specified and as directed NOTE : Punned thickness shall be measured and Paid

Supply and lay cable cover LV type 1 flat size ISI marked 250 X 150 X 40 mm all as specified and as directed

Supply and fix on pole GI tubing of 80mm dia light grade for cable protection all as specified and as directed

Supply and fix on pole GI tubing of 50mm dia light grade for cable protection all as specified and as directed

Supply and fix on pole GI tubing of 40mm dia light grade for cable protection all as specified and as directed

S&F TPN bus bar box made out of 1.6 mm thick MS sheet of size 400 X 400 X 200 mm with 4 Nos aluminium bus bar 200 Amp capacity for connecting cable (XLPE 3.5 core 120 sq mm -incoming and two out going including suitable sizes of lugs, glands nut bolt & washers) with insulator to be fixed on pole with clamp ,nut & bolt connection complete all as specified and as directed

Supply and fix MCCB TP 200-250Amp 36 KA 433 volt 50 HZ AC supply all as specified and as directed Make :L&T Cat No CM98060OOOO as incomer or equivalent as per appendix ‘B’

Supply andfix MCCB TP 125Amp 18 KA 433 volt 50 HZ AC supply all as specified and as directed

Supply and fix MCCB TP 100Amp 18 KA 433 volt 50 HZ AC supply all as specified and as directed Make: L&T Cat No CM9051700KO or equivalent as per appendix ‘B’

M&L for earthing complete with GI steel earth plate electrode 60 cm X 60 cmX 6 mm thick buried directed in ground(earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts and washers of GI or steel including necessary earth work and excavation of in any type of strata, PCC 1:3:6 type C-2 GI tubing 40mm dia for protection of strip ect all as per electrical plate No 3 of SSR part 1 including connecting to electrical equipment and testing on completion including dismantling old one all as specified and as directed

Supply and fixing LED street light fitting,45 watts,230 V,50HZ, suitable for operation over voltage range of 160 V to 260 V duly housed in pressure die cast aluminium housing comprising of LED lamp with individual optical lens, electronic driver with surge protection and PF more than 0.90 confirming to IP 66, rendering colour index of >70 with cool day light output and connecting with existing feeder/junction box with provision of 1.5 sq mm 3 core .aluminium cable multi stranded conductor suitable for fixing on GI bracket of suitable size duly clamped with bolts, nuts and washers complete all as specified and directed at site Note :Wire duly run through PVC conduit will be paid separately. Make: Bajaj Type BRTFG 45W LED product code 169799 or equivalent as per Appendix 'B'

BROTECH

M/s.GOODWILL ELECTRICALS

S and G Constructions

Prabha Electricals and Communications