Line construction and other work for giving new Electricity Connection of 310 KW load for EV Charging Station to chhainage 63 plus 000 of Purvanchal Express Way in the jurisdiction Electricity Distribution Division-Jagdishpur, Distt. Amethi.

Amount

Loading, carriage of following items from Store Centre, Gauriganj/Sultanpur to dump store including unloading and proper stacking (distance 0-70 km.)

ST pole.

ACSR Weasel Conductor

11 KV X Arm

XLPE cable 3*120 sq.mm.

Cable jointing kit 3*120

400 KVA Transformer

LT XLPE cable AL 1*630 sq.mm.

11 KV VCB for O/G CTR 200/100/5A

11 KV pin/disk insulator with nuts & bolts

Top Channel.

Stay Set complete

Earthing complete

Dropper channel

S/S base angle

Dragging of STP/PCC Pole from dump store to pit site.

Digging of pits up to the depth of 1650/2200 mm. as per site requirement. Fabrication & erection of single pole support on ST pole support including digging of pit & fixing of all accessories and clamps as per RESPO norms.

Digging of pits up to the depth of 1650/2200 mm. as per site requirement.Fabrication & erection of double pole support on ST pole including digging of pit & fixing of all accessories and clamps as per RESPO norms.

Grouting of ST pole in ratio 1:4:8 with cement stone ballast, coarse sand and plinthing 300 mm above ground level as well as muffing of plinth.

Spreading, laying & stringing of ACSR weasel conductor for construction of 11 KV line as per RESPO norms.

Ordinary earthing by 11 KV MS earth rod 2500 mm long as per RESPO norm.

Concreting & nuzzling of stay complete including fixing of necessary clamps with the help of nuts & bolts other accessorise required for completing the work as well as its grouting by civil material viz. Sand, stone ballast and cement. The contractor will provide all civil material as well as stay insulator

Underground laying by HDD method of XLPE cable 3*120 sq.mm. as per RESPO norms.

High pressure testing of 11 KV XLPE cable testing equipment will be arrenge by the contractor.

Installation & fixing of LT XLPE cable 1*630 Sq.mm. as per RESPO norms.

Installation & fixing of cable jointing kit 3*120 sq.mm. as per RESPO norms.

Installation & fixing of 11 KV VCB for O/G CTR 200/100/5A. as per RESPO norms.

Construction of plinth for 400 KVA transformer of 2x2x1.2 mtr. with help of first class brick and masonry 1:4 cement & coarse sand. Filling the structure completely as per norm with RCC to 1:2:2 cement & stone grit with M.S. bar & M.S. for restling the transformer.

Installation of 400 KVA Transformer on newly constructed plinth making proper connections from 11 KV system and proper testing as well as commissioning of Transformer.

Construction of 400 KVA Transformer fencing.

Pipe Earthing of LT Pannel & Transformer with sutable G.I. pipe. (Both body & Neutral)

Painting of ST pole

Providing and fixing of Gaurding angle/Top/T-off/Clamp for STP

Providing and fixing of Aluminium Lug 1*630 Sq.mm.

Providing and fixing of X arm hoding clamp

Note: Any quantity of item from sl no. 2 to sl no. 35 may vary to any limit within the financial value of agreement against this tender.

M/S VINOD KUMAR CHATURVEDI (BID ID -4752328)

M/S ABHAY CONTRACTOR (BID ID -4752253)