Finishing wall with cement based paint such as snowcem, robbiacem etc. of Workshop Canteen and WATER PROOFING Of Office of ADE and JE Civil and Office Passage of Xen P and D Cell and A.O workshop Nangal BBMB

Scraping of White Wash and Colour wash 8.31(a)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coat to give an even shade (CSR 2020 Items no. 16.13)

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete(16.6)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade(16.10)

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint.(16.19)

WATER PROOFING WORK AT TERRACE AREA: Surface Preparation : RCC Surface must be clean, even, and sound concrete .Remove oil, dirt, laitance Crack Treatment: Cutting and opening cracks to a depth of 10x10mm V or U shape by mechanical means . Cleaning all the dirt and loose particles by air pressure and wetting crack to attain SSD condition, filling the crack using repair polymer modified cement mortar. Bore Packing: Using AP Smartcare Repair Polymer over pipe and internal side of concrete followed by filing high strength non shrink grout for a gap of up to 20mm (between pipe and concrete) before treating the surface with waterproofing layer Supplying and applying Smart Care Damp Proof Ultra, fiber reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflectivity Index (SRI) of 105 on top of roof in three coats @ 1.2 litre/sqmt to be reinforced having minimum elongation of 350% tensile strength 2.9 Mpa and shall have crack bridging ability of up to 2.5mm and shall resist 10bars of hydrostatic pressure, reduces surfaces temperature up to 10 degree Celsius The system consists of self-priming with 33% dilution followed by two undiluted coats (dry film thickness of complete application system not less than 500 microns) and Ponding test to be done after application of material .Fist Quality makes Only