Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.0 L+₹1.1 L (2.45%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹46.1 L+₹1.2 L (2.72%)Rejected-AOC C2 PAIXOMONTIRO APTS BEHIND NSD ALTO DABOLIM VASCO DA GAMA GOA 403 801 | SOUTH GOA | GOA | 403801 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹46.4 L+₹1.4 L (3.20%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹48.0 L+₹3.1 L (6.85%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
29 Apr 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANATAK
GARRISON ENGINEER GOMANTAK VASCO DA GAMA PIN 403802
Repair and Maintenance of Day to Day Complaints of Officer Married Accommodation at NOFRA-I and II under AGE BR-II in GE Gomantak Vasco
2022_MES_517373_1
8422/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
VASCO DA GAMA
Refer tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹90,000
Yes
24 Jun 2022
8 Apr 2022
30 Apr 2022
8 Apr 2022
29 Apr 2022
20 Apr 2022
60 days
Amount
Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shafts all as directed by Engr-in-Charge.
Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished even and fair with out using extra cement.
M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed
M&L for one coat of alkali resistant primer on plastered surfaces over 3mm thick white wall care putty and applying two coat of oil bond distemper and preparation the surfaces complete all as specified and directed
M&L for 3mm thick putty on ceilling surfaces and applying two coat of oil bond distemper and preparation the surfaces complete all as specified and directed
Material & Labour for preparation of old decorated plastered surfaces at walls including cornices, and applying one coat of white wash on wall facia cornices etc completed all as specified and directed by Engr -in-charge.
All as per serial item No 06 above on ceilings.
Material and labour for one coat of oil bound distemper including preparation of old plastered surfaces on ceilling surfaces complete all as specified and directed.
Material and labour for one coat of oil bound distemper including preparation of old plastered surfaces complete all as specified and directed.
Complete removal of existance treatment of wall and applying a layer of 3mm thick wall care putty in two coat on wall and applying two coat of oil bond distemper complete all as specified and directed
Complete removal of existance treatment of ceiling and applying a layer of 3mm thick putty in two coat on ceilling surfaces and applying two coat of oil bond distember complete all as specified and directed
Material and labour preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in-Charge.
Material and labour for one coat of synthetic enamel paint on old painted steel surface of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L one coats of exterior emulsion paint ( Apex or weather coat) , white or tinted on old surfaces of walls including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.
Taking down wooden Chowkhats or frames exc. 1.5 sq.m and n.exc 4.0 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.
Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.
M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete.
S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 fixed with fasteners.
S&F aluminium powder coated frame and shutters for partition / windows/ ventilators/doors sliding/fixed/openable type complete with necessary fittings such as two aluminium handle cum lock for each window, roller etc and fixing all as speciefied and directed by Engineer-in-Charge.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge.
S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.
S&F 2nd class H/W 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
Supplied and fitted 2nd class H/W 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F 150 mm long Aluminium handles, cast type (ISI marked).
Supplying 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
M&L two coats of synthetic enemel paint on new wooden surface over a coat of pink primer incl necessery preparation.
Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.
S/F Sheet glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.
S/F figured glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wiremesh.
Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M&L joint free Non Skid ceramic plain white tiles (also in patches ) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).
M&L glazed ceramic white tiles 350x250x 6 to7 mm thick/450x350x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L Vitrified Ceramic tiles 9 to 10 mm thick light shade (also in patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed
S&F Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding,rubbing and polishing complete
M&L 20 mm thick Granite stone slab of approved colour ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms,WHB plaforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite CM 1:4 complete all as specified.
M&L Machine cut kota slab flooring 20-25 mm thick and including (in one piece) at flooring, steps of staircase etc.over 15 mm thick screed bed of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations (inner side only)
M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mmx6mm around edges and its varnishing / french polishing as directed.and specified.
S&F continuous ( piano) hinges, mild steel , bright finish or electrogalvanised width of flaps (when opened) 30 mm complete all as specified.
S&F 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete all as specified.
S & F 100 mm long Aluminium handles, cast type (ISI marked).
Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level)
M & L rubber moulded chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigment set, jointed and pointed in near cement slurry in floors over 15mm screed bed in CM ( 1 : 4)
M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.
S&F (in repairs) 25 mm dia fancy type drapery curtain rod made of Aluminium powder coated duly PVC sleeved with a pair of brackets and finial and fixed complete all as specified.
S&F ( in repairs) Stainless steel sink with draining board , made out of 1.00 mm thick sheet (ISI Marked) for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 950mmx460mm with bowl size 410mmx 330mmx160mm complete all as specified and directed.
S&F (in repairs) Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitng all as specified
S&F in repair PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices.approved by GE
S&F ( in repairs) Low level flushing cistern 10 ltr capacity moulded from virgin poly propylene Make Parry ware Brand Slimline Single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed. approved by GE
S & F PVC connections 15mm size with PTMT nuts of length 450mm.
S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including CI cantilever brackets, 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified fixed in repairs .
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white ( flushing cistern and flush pipe) complete all as specified
S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE
S & F 15mm Chromium plated , fancy type,Stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairapproved by GE
S&F ( in repairs) CP Angle stop cock( two way) screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed C complete all as specified .approved by GE
S & F 15mm Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE
S & F 15mm pillar taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair approved by GE
S&F ( in repairs) Bidet spray ( Health faucet) with 1 metre extendable metal tube and holder completed all as specified and directed.
S & F in repair brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed.
Supply and fixing in repair Towel rail of brass chromium plated 600mm long with and including chromium plated brass screws wooden / plastic cleats approved by GE
S&F ( in repairs) CP Brass Toilet paper holder fixed to walls with chromium plated (CP) brass screws. complete all as specified
S & F Stainless steel soap dish standard size heavy duty, complete all as specified and directed.
Material &Labour for Cutting chases, pinning in. making good to facings where equired and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.
Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed
Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed
Taking up or down 25 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed
Supplying and laying of CPVC pipes 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed
S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.
S&F grating doom type 100mm dia of stainless steel (min wt 25gms)
M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.
S & F 300mm mild steel, in repair ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.
S & F in repair toilet cabinet mirror fixed with and including chromium plated brass screws and wooden/plastic cleats.
Cleaning and removing all scale and dirt, etc, removing all dust and dirt from PVC/RCC tanks exc 250 ltrs and n.exc 500 ltrs from mouths of circulation pipes etc including letter writing for date of cleaning all as directed by Engr-in-Charge.
All as per item No. 80 here in before but exc 500 ltrs n.exc 1000 ltrs.
Dismantling of PVC existing water tank of exc 500 ltrs & n. exc 1000 ltr capacity and removing.
Dismantling PVC water tanks Exc 250 ltrs but not 500 ltrs for the following size and removing to site
S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991and removing from site complete.
S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991and removing from site complete.
S/F in repair 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified
S/F in repair 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified
S & F Steel rolling shutters with 1.00mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified & directed
Dismantling timber scantlings 40 sq. cm and over in any position complete all as specified and directed
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 290 Gde- E-165)
M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.
Dismantling of Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed. (Taking down of existing MS wind tie ( where required) to dismantle the mild steel sheet shall be deemed included in the unit rates)
S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified.
S&F in repair perforated particle board of 12 mm thick for false ceiling 60cm x 60cm with staples on snap grid.
Dismantling of cast iron drain pipe 100mm/75mm dia jointed in cement mortar and taking out of trenches/wall/floor etc incl fitting in foul condition.
Supply and fixing in repairs PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to walls in foul condition
Supply and fixing in repairs PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls in foul condition incl dismantling of old pipe.
Supply and Fix in repair PVC (SWR) bends any radius 110mm
S&F in repair PVC (SWR) bends any radius 75mm dia
M&L in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement
Removing building materials upto 1.00 km including loading, unloading and stacking at the destination and depositing out side defence land all as directed by Engr-in Charge.
AATREYA CONSTRUCTION
M/S P S BABU
K M SUBHANAIAH
M/s Abhay Enterprises
M/s Gayatri Contruction Co.
SACHIN CONSTRUCTIONS
M/S DUBAL CONSTRUCTION
STAR FABRICATION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .