Providing and Installting of High mast lights at CTC Lethpora Awantipora

Amount

Supply Installation testing and commissioning of 12.5 M High mast shaft in two sections suitable for wind speed as mentioned in the enquiry, with raising lowering system comprising, head frame luminaries carriage suitable to install 6-8 No luminaries in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable connector, integral power tool motor, manual handle, Junction box, lightening finial. Wiring material power cables between panel and mast, MCB in base compartment are not included (Bajaj/Crompton/Utkarsh).

Supplying installation testing and commissioning of foundation bolts manufactured from special steel along with nuts, washers, anchors plate and common template.

Supply installation testing and commissioning of 200 watt warm white flood light fixture including mounting arrangement (Philips, Bajaj, Crompton or EESL approved brands)

Supply installation testing and commissioning of LED type single dome aviation obstruction light.

Supply installation testing and commissioning of control panel for raising and lowering of lighting fixtures, consist of 9 amp contactor for raising and lowering and feeder panel of adequate capacity with 4 strip busbar of same capacity and individual MV+CBs for outgoing circuits. The panel shall also be provided with automatic astronomcal type switching controllers for operating of street lights with a set of voltmeter, ampere meter, indicator and manual Bypass Switch of required capacity.

Laying of cement concrete foundation suitable for 16 Mtr High mast shaft including fixing of foundation bolts using proper template including 10mm dia Iron bars duly welded excavation of earth disposal and refilling as per site.

Supply installation testing and commissioning of 3 phase 4 wire u-balanced type copper wound servo control oil cooled with input voltage range 150-460V and output voltage 415V+-1%, 5KVA Automatic voltage stabilizer at mains with output time delay relay (TDR) of adjustable time setting with proper earthing along with suitable concrete base above ground and MS sheet steel Canopy as per site requirement.

Providing Installation testing and commissioning of earthing by way of GI Pipe Bore type main earthing electrode, connecting with GI strip 25x4mm as per REC 12 standard.

Supply installation testing and commissioning of 25 Sq.mm 3.5 core 1100 V grade aluminium Un-armoured PVC cable of havells/Polycab/Finolex or equivalent make laid through HDPE pipe (38/50mm dia) size.

Supply installation testing and commissioning of Aluminium Thimbles /Lugs of Sorts.

F M INFRASTRUCTURE BUILDERS PRIVATE LIMITED

M/S SARIM ELECTRICAL SOLUTION

MIR TRADERS

M/S AKEEL ENGINEERING WORKs