Repair/replacement of HT/LT OH line, UG cables and LT panels and misc HT/LT line works

Dismentling of pole/street light standard/strut embedded in brick ballast foundation etc as required of 11 mtr long complete.

Supplying, installing connecting and testing of 11 KV 200 Amps triple pole gang operated air breack switch having 12 Numbers post insulator with earthing switch rotating type for horizential/ vertical operation mechanically operated 3 rows type mounted on Polymer type insulator (including insulators) and steel frame with operating mechanism consisting of operating rod of 25 mm bore medium grade galvanised iron pipe of suitable length to operated from ground level including locking arrangment with pad lock of godrej) make with three Numbers of keys including 11 KV swing out expulsion fuses (drop out type) of 25 Amps. Complete all as specified and as directed.

Supply and fix cable joint kit for 11 KV grade cable for outdoor termination, heat shrinkable type, joint complete with jointing material and accessories suitable for 3 core XLPE, armored, al conductor cable of size for cable of size 70 to 120 sqmm size.

Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required of 50 Sqmm 3.5 Core size

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type

-- do-- but for cable of size 70 to 95 sq mm

Supplying and erector of bow stay set complete (galvanised) with 19/20mm diax1.8mtr long sty rod, anchor plate of size 45cmx45cmx7.5 mm thick, thimble, stay claimps, bow tightner, 7/3.15mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement, 3 course sand, 6 graded stone aggregate 40mm nominal size)foundation including excavation and refilling and also with .6m long brace of size 50mmx50mmx6mm angle iron with 50mm dia pulley fixed at one end of the brace as required.

Supply, install,test and commissioning of LT out door type kiosk pedastal panel board of sige 60 cm x60 cm x30cm for 3 phase 4 wire 415 volts 50 HZ system, made out of 3.15 mm thick CRCA sheet with powder coated mounted on PCC platform, hinges with locking door arrangement,suitable cable enteries holes at bottom,and consisting of the following:-

Aluminium bus bar of rating 400 Amps capacity 4 Nos(TPN) mounted on supporters with shrouded by PVC insulated and arrangements for incoming / outgoing connections. -01 set