Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹16.6 L+₹36,853.32 (2.27%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹17.2 L+₹91,989.13 (5.66%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹17.3 L+₹1.1 L (6.60%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹17.9 L+₹1.6 L (10.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
17 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gurdaspur
Garrison Engineer, Gurdaspur (Tibri)
Spl repair to bldg No T-06 at Khetrapal Enclave at Tibri Mil Stn.
2022_MES_560227_1
GE GSR-49/2022-2023
Open Tender
Civil Works
Item Rate
240 days
GE Gurdaspur
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹66,000
30 Dec 2022
28 Oct 2022
24 Nov 2022
28 Oct 2022
17 Nov 2022
12 Nov 2022
Amount
Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement complete all as specified and directed
M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed
Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed
All as per Srl item No 06 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 5 shall be reused after necessary cleaning of mortar)
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement morter 1:4 , all as specified and directed.
Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43ltre/10sqm over and including priming coat of exterior primer applied @ 0.90 ltre / 10sqm over new surface after prepairing surface
M&L for complete removal of existiong treatment of old decorated surfaces plastered or un plastered of walls/ ceiling all as specified and directed
M&L for applying 2mm thick walll putty for surface to be distempered complete all as specified and directed
M&L for preparation of new surface and applying one coat of primer for surface to be distempered complete all as specified and directed
M&L for applying two coats of oil bound distemper on walls complete all as specified and directed
M&L for prepration of newly plastered surface and applying three coat of white wash as on ceiling.
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed
All as per Srl item No. 15 above but size of opening exceeding 1.5 Sqm but not exceeding 4 Sqm
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed
S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.
S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and complete all as specified and directed.
S&F MS framed work as in chowkats, door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 290 Gde E-165 complete.
S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, painting shall be measured and paid for separately
S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, painting shall be measured and paid for separately
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panel commercial type on both sides complete all as specified
S&F 35mm thick second class hard wood (Hollock), glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and as directed.
Providing cement concrete type B-1 1:2:4 (20mm graded aggregate) in bed block for hold fast for doors/ mud stops or roof kerbs, rounded or chamfered all as specified and directed .
S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones at any height including required scaffolding work.
S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed with nails/ oil putty complete all as specified and directed
All as per Srl item No. 31 above but figured glass pin head type & glazing with oil putty.
S&F in repair door closer hydraulically regulated, (Aluminium extruded section body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed
Supply and fix in repair 2 lever mortice lock vertical type 100mm made of Aluminium complete all as specified
S&F 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate.
S&F in repair 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate.
S&F 250mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed
S&F in repair 250mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed
S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F in repair 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised
S&F in repair150 mm Extruded aluminium alloy handles, fabricated type, anodised
S&F in repair 100 mm extruded aluminium alloy handles, fabricated type, anodised
S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter, overall length of cover plate 140mm.
S&F 100mm long butt Hinges, medium weight, cold rolled mild steel and fixed.
Supply and fix in repair second class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chemferred put together with glue pinned at joints and fixed to brick wall
M&L in repair for block boards, 18/19mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame work for shelves, partitions and shutters complete all as specified and directed.
S&F 100 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
S & F continous piano hingees of flaps width 30mm when open, mild steel bright finish or electro galvanised
S & F ball catcher (magnetic) with 8mm dia steel ball and brass body with striking plate incl letting in and fixed
M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described over a priming coat of red oxide including prepration of surfaces
M&L one coats of synthetic enamel painting on old steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of old painted surfaces
M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described over a coat of pink primer including prepration of surfaces.
M & L for one coat of synthetic enamel paint over old wooden surfaces exceeding 10cm width or girth including preparation of old painted surface complete.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for Vitrified tiles, dark shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:4.
S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:4 & complete all as specified and directed.
All as per item No. 57 above but on vertical surfaces but on rendering 10mm thick in CM 1:4.
S&F glazed ceramic coloured tiles thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
Supply and fixing vitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including connection to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 including taking down/dismantling old unserviceable WC complete all as specified.
S&F in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts and seat cover white for pedestal pan with flat bottom and cover and mild steel chromium plated hinging device.
S&F in repair vitreous China wash basin white, flat back size550x400mm including PTMT waste coupling 32mm bore, complete
S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve, float and handle and flush pipe of polythylene of low or high density or PVC, 32mm dia complete all as specified and directed
Dismantling water tanks Exc 500 Ltr & not exceeding 1000Ltr and S&F rotational moulded polythene, triple layers, white water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed
Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, white water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed
Taking up or down 15mm dia steel tubing and connections all as specified and directed.
S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
Refixing 15mm dia steel tubing and fittings, connection in new or old position (in wall ceiling floors etc) incl cleaning all as specified and directed.
Taking up or down 20mm dia steel tubing and connections all as specified and directed.
S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
Refixing 20mm dia steel tubing and fittings, connection in new or old position incl cleaning all as specified and directed.
S&F in repair 15mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
S&F in repair 20mm bore stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed
S&F in repair Pillar taps fancy type 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.
S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup (concealed type) and fixed.
S&F in repair swan neck pillar cock 15mm bore, cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without letter 'HOT or " COLD", screwed for iron pipe complete all as specified and directed. Make :- Parryware cat No. G0268A1 or equivalent of make Hindware, GEM as approved by GE.
S&F in repair wall mixer 2-in-1, 15mm bore, cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without letter 'HOT or " COLD" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. Make :- Parryware cat No. G4616A1 or equivalent of make Hindware, GEM as approved by GE.
S&F in repair 100mm dia stainless steel grating with or without hinge type or hole type complete all specified and directed.
S&F in repair Brass chromium plated shower rose fancy type 125mm size with or without swivel joints, including fixing to steel pipe or union with brass CP arm 195mm long, 15 mm size complete all as specified and directed.
S&F in repair toilet paper holder flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed
S and F in repair aluminium anodised tubular towel rail D type 60cm long between flanges including brackets complete all as specified
Supply and fix in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and and railing 60cm long
Supply and fix in repair PVC waste pipe 32mm bore of 800 to 1000mm length for kitchen sink/wash hand basin/urinal pot as directed by Engineer in Charge
Supply and fix in repair brass CP flushing jet including pipe for Europian type closet of suitable length with brass check nut complete all specified and directed
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.
Supply and fix in repair heath faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S&F in repair stainless steel kitchen plate rack size 600mm x 900mm x 250mm deep made out of 0.63mm thick stainless steel sheet (Grade AISI 304) including fixing arrangement complete all as specified and directed
S&F in repair sinks with drainage board made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.
Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., ( measured overall as fixed along the centre line over fittings and accessories
S&F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor
All as per Srl item No 92 above but 75mm dia
S&F 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2m length including all fittings complete all as specified and directed by Engineer-in-charge
All as per Srl item No 94 above but 75mm dia
S&F 110mm bore PVC (SWR) bends any radius with access door
All as per Srl item No 96 here in before but 75mm bore.
S&F 110 mm bore( SWR) vent cowl
S&F 110mm bore PVC (SWR) junction double, (double T), equal or unequal with access door.
All as per Srl item No 99 above but 75mm bore.
S&F 110mm bore PVC (SWR) junction single, (single T), equal or unequal with access door.
All as per Srl item No 101 above but 75mm bore.
M&L 75mm bore PVC (SWR) floor trap ,plain with grating including jointing with solvent cement
Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to low lying areas complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound, finishing even and smooth without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid separately under relevant item).
Supply only integral water proofing compound.
Dismantling brick tiles or terracing tiles , single layer on roofs
Demolition of mud in roofs , any thickness , including plastering and leeping (whether full thickness removed or only a part thereof
M & L for PCC (1:2:4) type B-0 (12.5 mm graded stone aggregates) as in sloping padding in roof slab.
M&L for 40 mm thick brick tiles laid over 15 mm thick screed bed in cement mortar 1:6 and jointed, grouted flush in cement mortar 1:3 mixed 5% of crude of by weight of cement on roof padding complete all as specified and directed
All as per Srl item No 110 above but except tiles.
M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in, including bitumen primer @ 0.40 kg /Sqm after cleaning surface complete all as specified and directed.
M&L for Cement concrete 1:5:10 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to low lying areas complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in floor finishing even and smooth without using extra cement .
Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and fair including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand (all by weight) complete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar
M&L Granite (of any type) work (table rubbed and polished) 16 to 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:3.
Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to low lying areas complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregates) as in shelves complete all as specified and directed.
S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed
Material and labour for formwork to sides and soffits of beams, lintels, cantilevers, shelves, bands, including supports, overhangs, etc. for fair finished flat surfaces of concrete complete all as specified and as directed.
S&F in repairs mild steel pipe 20mm bore, powder coated/ chromium plated as in certain rod with fixing brackets stops rollers including fancy type knobs two Nos to each curtain rod.
Material and Labour for repairing to RCC projections, chajjas, roofs, facia, ceiling etc. by scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement of damaged loose RCC surfaces and applying neat cement slurry @ 3kg/sqm and filling the surfaces with cement sand mortar 1:3 or cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) using coarse sand in layers as required and reinforced with 8mm dia. TMT bars in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces in any situation and at height upto 6.5m complete all as specified. Notes:- 1. Cost of formwork shall be deemed to be included in unit rate quoted by the Contractor. 2. Flat area shall only be measured and paid.
M&L for preparation of old decorated surfaces plastered or un plastered of ceilng and applying two coat of white wash on ceiling complete all as specified and directed.
Material and labour for applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43ltre/10sqm including preparation of old surfaces.
S&F stainless steel kitchen pull out slide basket of size 17"x20"x4" (Inch) of steel grade 304 with suitable frame work for cutlery including telescopic hinges suitable for basket complete all as directed.
S&F stainless steel kitchen pull out slide basket of size 17"x20"x4" (Inch) of steel grade 304 with suitable frame work for cup and saucer including telescopic hinges suitable for basket complete all as directed.
S&F stainless steel kitchen pull out slide basket of size 17"x20"x6"(Inch) of steel grade 304 with suitable frame work for plate including telescopic hinges suitable for basket complete all as directed.
S&F stainless steel kitchen pull out slide basket of size 17"x20"x6" (Inch) of steel grade 304 with suitable frame work for thali including telescopic hinges suitable for basket complete all as directed.
S&F stainless steel kitchen pull out slide basket plain of size 17"x20"x4" (Inch) of steel grade 304 with suitable frame work including telescopic hinges suitable for basket complete all as directed.
E/M PORTION Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed.
Point wiring with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm (nominal area) using approved colour coding, 1100 volts grade, ISI marked, including PVC conduit heavy grade, 20 mm or higher dia. with fittings concealed in wall/ on surface for ceiling with continuous earth wire of PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 1.5 Sqmm (nominal area) 1100 volts grade, ISI marked and connecting to the common earth dolly including provn of 3mm thick plastic laminated sheet of appropriate size and sunken CI/pressed steel terminal boxes for mounting switches, sockets and regulators etc. including cutting chases and making good to the disturbed surfaces as per existing for One light point/fan point/ bell point controlled by one, one way switch complete all as specified and directed.
All as per Srl item No 134 above but one modular socket 6A multipin 2 module on independent board.
All as per Srl item No 134 above but One modular socket, 6A multipurposes 2 module on same board.
All as per Srl item No 134 above but one light point controlled by two, two way switches.
All as per serial item No.134 here-in-before but with PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area), using approved colour coding, 1100 Volt grade ISI marked including PVC insulated and PVC sheathed single core multistranded FRLS copper conductor cable of size 2.5 Sqmm (nominal area) 1100 Volt grade ISI marked as earth continuity conductor and connecting to the common earth dolly for 3 pin 15/16 Amps socket outlet on independent board.
M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt , FRLS cable of size 6 sqmm including 6 sqmm multistranded copper conductor FRLS cable PVC insulated for earthing duly connected with earth dolly, with approved colour coding including PVC conduit heavy grade, of appropriate dia. concealed in wall with accessories including cutting chases and making good to the disturbed surfaces as per existing and taking down old unserviceable wiring complete all as specified and directed. Note :- (a) Three run of cable alongwith PVC conduit together shall be measured as single run.
S&F modular switch one way ,1 module 6 amps single pole complete all as specified and directed.
S&F modular socket 6A multipin 2 module complete all as specified and directed.
S&F modular switch one way 16 amps one module single pole complete all as specified and directed.
S&F modular socket, 6A/16A multipin combined 2 module complete all as specified and directed.
S&F switch modular 2 way 6A one module all as specified and directed.
S&F surface mounting universal batten housing made of powder coated CRCA sheet suitable for upto 1 x 18/20 W LED tube and taking down existing old unserviceable housing complete all as specified and as directed.
S&F LED tube 18/20W ultra bright LED polycarbonate tube with efficacy minimum 2000 lumens, CCT > 6500K, PF > 0.90 suitable for fitting into exsting/ new batten housing and taking down existing old unserviceable tube complete all as specified and directed. Note :- The contractor will submit the LM-80 and LM-79 report form manufacturer to Engineer-in-Charge for approval before incorporating the items in work
Taking down carefully ceiling fan complete fittings at site removing fans and deposited to MES storeyard for re-fixing after completion of work at the site .
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete including replacement of one pair of Canopy.
S&F in replacement of modular fan regulator 2 module electronic type 5 step 100watt, 240 Volt and connecting complete all as specified and directed all as directed.
S&F Bell, AC, 230 volts, single pole complete all as specified & directed.
S&F bell push modular type 6 Amp 1 module complete all as specified and directed.
S&F lamp holder PVC body angle type including 9 watt LED bulb polycarbonate body complete all as specified and directed.
M&L ceiling rose, 3 terminals/ phase/ PVC/ polycarbonate, isolated body, surface
S&F GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 40mm x 5mm thick and drilling of hole for and including nuts, bolts and washers including painting MS clamps with two coats of synthetic enemal paint over a coat of red oxide primer including taking down the existing GI pipe bracket complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supplying and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with SPN double door complete all as specified and directed. Note : All the connection of incoming and out going wire in MCB will be made with thimble with suitable size as directed.
S& F in repair MCB single pole 6 amps to 32 amps , 'C' series complete all as specified and directed.
S& F in repair MCB single pole and neutral 32 amps C' series complete all as specified and directed. .
Material and labour distribution board made out of CRCA sheet DB vertical type double door TPN 4 Way including fixing in the wall, cutting chases, grounting and making good to match with the existing including making connections all as directed containing the folowings:- (a) MCCB 4 Pole 63 Amps 16 KA breaking capacity with thermal release: 01 No (In coming). (b) Bus bar factory made made out of Aluminium duly insulated with wire adhesive tape RYB & black :4 Nos. (c) MCB SPN 40 Amp: 5 Nos, MCB SP 40 Amp: 02 Nos (Out going). (d) Connection from MCCB to bus bar will be made with Aluminium Strip of suitable capacity as directed.
M&L Earthing complete with galvanised steel earth plate electrode 60cm ×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately.
Excavation in trenches in soft loose soil n.exc 1.5m wide and n.exc. 1.5m in depth for poles, stay, cable, pipe etc. getting out all as specified.
Returning filling including spreading, levelling and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified.
Removing excavation material, soils to a distance n. exc 50m and depositing where directed at a level n. exe 1.5m above the starting point.
Supply and lay brick common burnt sub class "B" old size for protection of cable laid in trenches for under ground cable all as specified.
M&L sand cushioning in trenches using fine sand to under ground cable, laid in two layers before laying the cable & after laying the cable complete all as specified
M&L GI tubing light grade for cable protection fixed long the pole/ under road/ along the wall of size 40mm bore with necessary clamps complete all as directed.
Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
RATTAN CHAND CHANDAN AND CO
Harbhajan electric co
MALKIT SINGH AND SONS
buta singh and sons
talwinder singh and co
DEEPAK AND CO
M/s. Nirmal Singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .