Providing Distribution pipe line with 125mm dia 1000m and 50mm dia HDPE 1000m 40mm dia 700m and 32mm dia 200m GI Pipe Sholayar dam Eadathukarai

Amount

Supply and delivery of the following Ductile Iron class K9 Flanged Pipes as per IS 8329/2000 specification as directed by the departmental officers including cost and conveyence the same to the departmental store etc complete as per standard specification. (cost of pipe without excise duty)

DI 200mm dia 5M Length Pipe

Supply and fixing in position of C.I Double flanged Sluice valve with cap / wheel as per IS 14846/2000 PN 10.

200mm dia

Supply and Delivery of M.J Collars

200mm dia

Supply and delivery of CI D/F Scour valves with cap along with specials of the 200mm dia in size confirming to IS 14846 / 2000 (PN1) including flanged tail piece and other specials as required, loading, unloading, transportation charges and stacking and jointing including cost of jointing materials but excluding excise duty etc, complete as per standard Specification. Data

200mm dia

Manufacture, supply and delivery of 80mm dia Double Air Valve as per ISI 14845/2000 of flanged type with screw down valves combined as per G.K. catelogue Fig. No. H40 and tested to a minimum test pressure of 120m of head of water including loading freight, unloading, insurance all taxes stacking at site but excluding excise duty etc., complete and as directed by the departmental officers. Data

200mm dia

Jointing the 200mm dia C.I/ D.I-S/S pipes and specials with neat cement or cement mortar and spun yarn including caulking the joints, curing. (including cost of jointing materials) and testing to the required pressure including conveyance of water for filling during testing, labour charges and all other incidental charges etc., complete as per standard specifications and as directed by the Engineer. TWAD SOR 2021 -22, Page No 245

200mm dia

Jointing 200mm dia C.I/ D.I double flanged pipes and specials with rubber insertion or any equivalent to the required specifications with M.S. bolts and nuts etc., complete including charges for special tools and plants such as air compressor and helmets and sheet piles. etc (including cost of jointing materials) and all other incidental charges etc., complete as per standard specifications and as directed by the Engineer. TWAD SOR 2021 -22, Page No 244

200mm dia

Jointing of Mechanical Joint Collar, Nuts, Gaskets and Fixing Position as Directed by Departmental Officers.

200mm dia

Ductile Iron Class PN-10 Flanged Pipes As Per Is 8329/2000

DI 200mm D/F 2.00 m length of pipe

DI 200mm D/F 1.50 m length of pipe

DI 200mm D/F 1.00 m length of pipe

DI 200mm D/F 0.50 m length of pipe

DI 200mm D/F 0.30 m length of pipe

Supply and delivery of the following Ductile Iron specials as per IS 9523/2000 specification as directed by the departmental officers including cost and conveyence the same to the departmental store etc complete as per standard specification.

Ductile Iron D/F Specials

Ductile Iron S/S Specials

Conveyance of Pipes of 200mm dia DI Pipes Including Unloading from lorries at stacking them properly and loading in to lorries at stack yard transportation charges up to 8km from stock yard and unloading from lorries at site along the alignment carfully etc., complete as per standard specification and as directed by the Engineer,

Earthwork excavation for foundation in all soils and sub soils except in hard rock requiring blasting and depositing on bank with initial lead of 10m and initial lift of 2m inclusive of shoring, shuttering, bailing out water wherever necessary, refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth within the compound in place shown by the departmental officers and clearing and levelling the site etc,. complete.

Plain Cement concrete in 1:4:8 [one cement, five sand and ten course aggregate] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete

Brick work In CM 1:5 mix using best Second Class Table Moulded Chamber Burnt Bricks 9"x4½"x3" having 350 kg/cm² compressive strength and 15% or less water absorbent in the period of 24hours immersement and confirming to ISI specifications

Plastering with cement mortar 1:4 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thickness in PCC1:2:4(one cement, two sand and four course aggregates) using 20mm size Hard Broken / Machine crushed Granite Stone Jelly excluding cost of reinforcement

Making open in culvert for laying DI pipe including charges for breaking of R.R Masonry by jack hammer and repacking the same with cement mortal (Rate including labour charges complete as per specification

DI pipe and specials with DI are welding Rod Including hire Charges for generator st welding Machine,cutting Machine with Diesel for Generator set,transporting charges etc.,complete

SENTHILKUMAR